Baxter SP600W User Manual

FEATURES

CONVENIENT & LABOR SAVING

Microcomputer controlled, the
water meter will deliver a specific
amount of water at a specific temperature.

DIGITAL CONTROL PANEL

Large digital displays show actual
and set temperatures. Light indicates
when meter is adjusting temperature
due to a new setting or reacting to
fluctuations in line temperature or pressure.

START/RESUME

Delivery can be interrupted, the amount
set changed (above the quantity already
dispensed) and delivery resumed.

ITEM NUMBER:PROJECT:

SP600W WATER METER

6’ Power Cord

Hot Water

Cold Water

TEMPERATURE PROBE

Senses flour, dough or room temperature.

POWER FAILURE SAFE MEMORY

Water meter remembers last setting
during black-out or accidental
disconnection from power.

INPUT SUPPLY LINES

Contain shut-off valves, cross-flow
preventers, pressure regulators,
gauges and strainers. A disconnect
joint is provided at the meter.

STAINLESS STEEL

Stainless steel casing provides
protection for precision components.

WATER CHILLER OPTION

For use with external water chiller.
Not included with unit. Consult factory.

Quick Disconnect
8’ Temperature
Probe

The Baxter water meter will deliver a specific

amount of water at a specific temperature and

is microcomputer controlled for dependable

Dispensing
Hose

Regulator, gauge & strainer
not shown.

and accurate service.

PRINTED IN USA 5/02 SP600W

BAXTER

BAXTER • 19220 STATE ROUTE 162 EAST • ORTING, WA 98360

[phone] • CUST SVC: [phone] FAX: [phone] www.baxtermfg.com••

SP600W SPECIFICATIONS

24"

(60.96cm)

Suggested Water Meter Location

66"min-78"AFF

(167.64 cm)

(167.64 cm)

HAND SINK

SPECIFICATIONS

Units of measure:

English or Metric

Temperature range:

32°F-99°F (0°C-37°C)

Weight Range:

Up to 1,000 pounds (462 liters)

Accessory Switch:

pump when delivering.

Flow:

More than 50 lbs./min.@ 20 psi inlet pressure and more

than 16 lbs./min.@2psi.(adjusted for gravity feed chiller).

Delivery Accuracy:

lb. delivery).

Temperature Accuracy:
Temperature Adjustment Time:

seconds for any set temperature.

Wall Mount

bracket and hardware are included. Meter lifts off

the bracket leaving your wall mount hardware intact.

7 amp, 1/6 HP. Automatically activates

±1%@ 20 psi inlet pressure (above 6

±1°F (17°C)

Normally less than 30

WATER
METER

19”

(48.26 cm)

12"min-24"

(30.48 cm)

(60.96cm)

36"AFF

(91.44 cm)

FLOOR

UTILITIES

Hot Water
Cold Water
Input Supply Lines

preventers, pressure regulators, gauges and strainers. A
disconnect joint is provided at the meter.

Output hose

hose and stainless steel tube “hook” for hanging on your mixer
bowl or sink. (An approved siphon breaker is installed at the
meter-end of the hose.)

ORDERING INFORMATION
Electric Choices

Standard: 120V/1 ph/50-60Hz/1 amp w/6’ (1.8 m) cord & plug
Option: 220-250V/1 ph/50-60Hz/1 amp w/6’ (1.8 m) cord only

Probe Position

Bottom Mount (Standard)
Side Mount

140°F (60°C) max., 25-100 psi, 1/2” (1.3 cm) pipe

32°F (0°C) min., 20-100 psi, 1/2” (1.3 cm) pipe

contain shut-off valves, cross-flow

consists of U.S.D.A. approved 8’ long flexible

Dimensions

Weight:

:

13.5”Wx7.5”Dx19”H

(34.3 cm x 19.1 cm x 48.3 cm)

52 lbs. (23.6 kg)

Dispensing Hose Direction

Side (Standard)
Front

Water Chiller Interlock (Option)
Freight Class 65

SP600W PRINTED IN U.S.A. 5/02

BAXTER

BAXTER • 19220 STATE ROUTE 162 EAST • ORTING, WA 98360

[phone] • CUST SVC: [phone] FAX: [phone] www.baxtermfg.com••