Baxi Solo 3 PFL System 40, Solo 3 PFL System 70, Solo 3 PFL System 50, Solo 3 PFL System 60, Solo 3 PFL System 80 User Operating Instructions Manual

User’s Operating
Instructions

Please keep these instructions safe.

Should you move house, please hand

them over to the next occupier.

Baxi Solo 3 PFL System

Wall Mounted Powered Flue System Boiler

Gas Fired Central Heating Unit

2

Baxi UK Limited is one of the leading manufacturers

of domestic heating products in the UK.

Our first priority is to give a high quality service to our

customers. Quality is built into every Baxi product -

products which fulfil the demands and needs of

customers, offering choice, efficiency and reliability.

To keep ahead of changing trends, we have made a

commitment to develop new ideas using the

latest technology - with the aim of continuing to

make the products that customers want to buy.

Everyone who works at Baxi has a commitment to

quality because we know that satisfied customers

mean continued success.

We hope you get a satisfactory service from Baxi. If

not, please let us know.

Natural Gas

Baxi Solo 3 PFL System 30

G.C.No. 41 075 25

Baxi Solo 3 PFL System 40

G.C.No 41 075 26

Baxi Solo 3 PFL System 50

G.C.No. 41 075 27

Baxi Solo 3 PFL System 60

G.C.No 41 075 28

Baxi Solo 3 PFL System 70

G.C.No. 41 075 29

Baxi Solo 3 PFL System 80

G.C.No. 41 075 31

Baxi is a BS-EN ISO 9001
Accredited Company

The boiler meets requirements of Statutory
Instrument “The Boiler (Efficiency) Regulations
1993 N

o

3083” and is deemed to meet the
requirements of Directive 92/42/EEC on the
efficiency requirements for new hot water boilers
fired with liquid or gaseous fuels:-

Type test for purpose of Regulation 5 certified by:
Notified Body 0086.

Product/Production certified by:
Notified Body 0086.

For use in GB / IE only.

1.0 Warnings

1 3

1.1 Safe Installation

1. This appliance must be installed in accordance
with the manufacturers instructions and the rules
in force. For Ireland install in accordance with
I.S.813 “I

NSTALLATION OF GAS APPLIANCES”. The

installation must be carried out by a CORGI
Registered Installer or other competent person
and be in accordance with the relevant
requirements of the current G

AS SAFETY

(Installation and Use) REGULATIONS, the BUILDING
REGULATIONS (Scotland) (Consolidation), the LOCAL
BUILDING REGULATIONS, the CURRENT I.E.E. WIRING
REGULATIONS and the bye laws of the Local Water

Undertaking. Where no specific instructions are
given, reference should be made to the relevant

BRITISH STANDARD CODES OF PRACTICE.

2. Read the instructions before installing or
using this appliance.

IMPORTANT: The addition of anything that

may interfere with the normal operation of the
appliance without the express written
permission of Baxi UK Limited, could invalidate
the appliance warranty and infringe the Gas
Safety (Installation & Use Regulations).

WARNING: Never hang clothes or other

items over the appliance.

1.2 In case of gas leaks

1. If a gas leak is found or suspected, turn off
the gas supply at the meter immediately and
contact your Installer or Local Gas Supplier
Emergency Service (under 'Gas' in the phone
directory).

1.3 Servicing your boiler

1. We strongly recommend that your Boiler is
serviced annually by a competent person for
reasons of safety and economic. Your Installer or
British Gas Service will be able to advise you.

1.4 Electricity supply

1. THIS APPLIANCE MUST BE EARTHED

A standard 230 volt ~ 50Hz supply is required.
The appliance must be protected by a 5 amp fuse.

“Benchmark” Installation, Commissioning and Service Record
Log Book

Please ensure that your installer has completed the Installation and
Commissioning sections of the Log Book and hands the Log Book over.
The details of the Log Book will be required in the event of any warranty
work. Keep the Log Book in a safe place and ensure that the relevant
sections are completed at each subsequent regular service visit.

WARNING: If it is either known or suspected that a fault exists on the
appliance, it must not be used until the fault has been corrected by a
competent person.

All CORGI registered installers carry a CORGI identification card and have
a registration number. Both should be recorded in your boiler Log Book.
You can check your installer is registered by telephoning 01256 372300 or
writing to:­1 Elmwood,
Chineham Business Park,
Crockford Lane,
Basingstoke. RG24 8WG.