Baxi churchill II, 347 Owner's Manual

5110947/01

This guide to be left with the owner

OWNER GUIDE

THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)

THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION IN THE UNITED

KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE) ONLY.

Manufactured exclusively for British Gas & Scottish Gas by Valor Heating

For Service Phone [phone]

© Baxi Heating U.K. Ltd.

CHURCHILL II

Radiant / Convector Gas Fire

Model 347

(G. C. Number 32-032-62)

Safety First.

This gas fire is CE Approved and designed to meet the appropriate British Standards and

Safety Marks.

Quality and Excellence.

This fire has been manufactured to the highest standards of quality and excellence and

was manufactured under a BS EN ISO 9001 quality system accepted by the British

Standards Institute.

The Highest Standards

The manufacturer is a member of the Society of British Gas Industries which works to

ensure high standards of safety, quality and performance.

Careful Installation

The manufacturer is a CORGI registered company. This gas fire must be

installed by a competent CORGI Registered Installer in accordance

with our Installer Guide and should not be fitted directly on to a

carpet.

Valor Heating, Erdington, Birmingham B24 9QP

www.valor.co.uk

Because our policy is one of constant development and improvement, details may vary slightly from those

given in this publication

Page 2

OWNER GUIDE

LIST OF CONTENTS

Section

Page

SAFETY 3
APPLIANCE DIMENSIONS 5
GAS CONSUMPTION 5
OPERATING YOUR FIRE 6
CLEANING YOUR FIRE 8
REPLACING THE RADIANTS 8
MAINTENANCE 9

This gas fire is designed to meet the most stringent quality, performance and safety
requirements to provide you with many years’ trouble-free service.

This guide aims to improve your understanding and appreciation of your gas fire by
providing simple and informative instructions to ensure that you benefit from the
excellent performance and features it has to offer.

SAFETY

Do have the fire installed by a competent person. In the United Kingdom, installation
must be in accordance with the latest edition of the Gas Safety (installation & use)
Regulations. In the Republic of Ireland, installation must be in accordance with all
national and local regulations in force.

Do

have the chimney swept prior to installation if it was previously used for solid fuel.

Do have the fire installed in accordance with the installation instructions
Do allow a minimum clearance of 95mm from the top of the appliance fascia to the

underside of any shelf whether it is made from combustible or non-combustible
materials. This clearance is necessary to allow the fascia to be lifted off for servicing
and also allows sufficient access to operate the control knob. For a shelf made from

wood or other combustible materials deeper than 150mm add 12.5mm to the clearance

for every 25mm of additional shelf depth (See graph 1). Please bear this in mind if ever

you add a shelf.

Page 3

OWNER GUIDE

IF YOU SMELL GAS
DON’T SMOKE
EXTINGUISH ALL NAKED FLAMES
DON’T TURN ELECTRICAL SWITCHES ON OR OFF
TURN OFF THE GAS SUPPLY AT THE METER
OPEN DOORS AND WINDOWS TO GET RID OF THE GAS
IMMEDIATELY CALL THE GAS EMERGENCY SERVICE – SEE YOUR LOCAL TELEPHONE
DIRECTORY