Baumer TXG User Manual

56

56

4

x

M

5

C Mount

62M x 1,5

58 3

Ø 65

51,8 61,8

70,8 93,8

Ø

65

26

26

36

36

4

x

M

3

36

36

26

8

x

M

3

48

C-Mount

6,5

26

26

36

36

4

x

M

3

36

36

26

8

x

M

3

57,7

C-Mount 6,5

26

26

36

36

4

x

M

3

36

36

26

8

x

M

3

48

C-Mount

6,5

Quick Start Guide

TXG Gigabit Ethernet cameras

Latest software version and technical
documentation are available at:

www.baumer.com/vision/login

Product Specication

TXG series – Innovative functionality in compact design

Output of excellent 8 / 12 bit image data ▪
VGA up to 5 megapixel, monochrome and color ▪
RGB and YUV interpolation algorithms on board ▪
Bandwidth up to 1000 Mbit/sec for fast multi-camera operation ▪
Flexible system architecture due to cable length up to 100 m ▪
Baumer driver for reliable image transfer ▪

Camera Type

Monochrome / Color

TXG02 / TXG02c 1/4“ 656x494 140
TXG03 / TXG03c 1/3" 656 x 494 / 656 x 490 90
TXG04 1/2" 656 x 494 56
TXG06 / TXG06c 1/2" 776 x 582 / 776 x 578 64
TXG08 / TXG08c 1/3" 1032 x 776 / 1032 x 772 28
TXG12 / TXG12c 1/3“ 1296x966 32
TXG13 / TXG13c 1/2" 1392 x 1040 / 1384 x 1036 20
TXG14 / TXG14c 2/3" 1392 x 1040 / 1384 x 1036 20
TXG14f 2/3" 1392 x 1040 30
TXG20 / TXG20c 1/1.8" 1624 x 1236 / 1624 x 1232 16
TXG50 / TXG50c 2/3" 2448 x 2050 / 2448 x 2050 15

Sensor

Size

Resolution

Tested according to standard
EMVA 1288

Full Frames

[max. fps]

Dimensions

● Standard Cameras:

● Standard Cameras with Power over Ethernet (PoE):

● Standard Cameras with additional I/Os:

Safety

Conformity:

CE, FCC Part 15 Class B, UL (standard cameras only), RoHS

FCC – Class B device

No t e : This equipment has been tested and found to
comply with the limits for a Class B digital device, pursu­ant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interfer­ence in a residential environment. This equipment gener­ates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructios,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occure in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off an
on, the user is encouraged to try to correct the interference
by one or more of the following measures:

Reorient or relocate the receiving antenna. ▪
Increase the separation between the equipment and the ▪
receiver.
Connect the equipment into an outlet on a circuit different ▪
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician ▪

for help.

Further Information

For further information on our products visit www.baumer.com
For technical issues, please contact our technical support:
[e-mail] Phone [phone] Fax [phone]
© Baumer Optronic GmbH Badstrasse 30 DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.

Subject to change without notice. Printed in Germany 07/13. v4.5 11037533

UL – Class III device ▪

The power supply to operate the
TXG series of cameras must be real­ized using a limited power supply in

accordance to UL60950.

Safety Precautions

Protect the sensor from dirt and ▪
moisture.
Never open the camera housing. ▪
Avoid camera contamination by ▪
foreign objects.

Environmental requirements:

Storage temp. -10°C ... +70°C
Operating temp. +5°C ... +50°C
Housing temp. max. +50°C
Humidity 10 % ... 90 %

Non-condensing

System Requirements

Single-camera system Multi-camera system

Minimum Recommended Minimum Recommended

CPU

Intel® Pentium®4

or comparable

Clock
RAM
Operating

processor

2.5 GHz > 2.5 GHz 2.5 GHz 3 GHz

1024 MB 2048 MB 2048 MB > 2048 MB

system
(OS)

Intel® Core™ Duo comparable processor

Microsoft® Windows® XP incl. Service Pack 2 or higher

Microsoft® Windows® XP x64 incl. Service Pack 2 or higher

Microsoft® Windows Vista™ 32 / 64 bit systems

Dimensions

● Standard Cameras with IP67 housing:

Microsoft® Windows 7 32 / 64 bit systems

Graphic
Ethernet
Framework
(optional)

Linux® 32 / 64 bit systems from Kernel 2.6.xx

recommended resolution 1280 x 1024, color depth at least 16 bit

Gigabit Ethernet compliant NIC (recommended Intel® chipset)

Windows® OS: NET™ Framework 2 0 or higher

Linux® OS: Mono 1 2.4 or higher

● Protective Caps IP67:

Tube Length

[mm]

51,8 11008777
61,8 11008776
70,8 11008775
93,8 11008774

Item No.

1

1

2

3
2

Process and Data Interfaces

18

18

8

5

73

1

426

open wire

1

4

3

1

2

4

3

8

5

7 3

1

426

open wire

Interfaces of camera types:

Camera

Type

Standard ■ □ □ ■ ■ □

PoE □ ■ □ □ ■ □
IP67 □ □ ■ ■ ■ □

IO ■ □ □ ■ □ ■

8P8C

mod jack

8P8C

mod jack

LED

M12

8 pins

M8

3 pins

M8

4 pins

Gigabit Ethernet Interfaces

8P8C mod jack 8P8C mod jack with LED M12 8 pins

M8

8 pins

LED Signaling

LEDs of camera types:

Camera Type 2 LEDs 3 LEDs

Standard ■ □
PoE □ ■
IP ■ □
I/O ■ □

Mounting Adapters

For Standard Cameras:

Name Item-No.

Tripod mounting adapter 11003060

Front mounting adapter 11002638

1 (gn/wh) MX1+ 1 (gn/wh) MX1+ (neg. / pos. V
2 (gn) MX1- 2 (gn) MX1- (neg. / pos. V
3 (og/wh) MX2+ 3 (og/wh) MX2+ (pos. / neg. V
4 (bu) MX3+ 4 (bu) MX3+ 4 (ye) MX1-

) 1 (wh) MX3-

port

) 2 (bn) MX4+

port

) 3 (gn) MX4-

port

5 (bu/wh) MX3- 5 (bu/wh) MX3- 5 (gr) MX2+
6 (og) MX2- 6 (og) MX2- (pos. / neg. V
7 (bn/wh) MX4+ 7 (bn/wh) MX4+ 7 (bu) MX3+

) 6 (pk) MX1+

port

8 (bn) MX4- 8 (bn) MX4- 8 (rd) MX2-

Interfaces for Power Supply and Digital IOs

M8 3 pins M8 4 pins M8 8 pins

1 (brown) Power VCC1 (brown) TrigIN+ 1 (white) Out 3
3 (blue) GND 2 (white) TrigIN- 2 (brown) In 2
4 (black) NC 3 (blue) Flash

4 (black) U

ext

3 (green) In 1

out

4 (yellow) IO GND
5 (grey) IO Power V
6 (pink) Out 1
4 (blue) Out 2
8 (red) In 3

Power Supply

Power V

CC

8 V DC ... 30 V DC

I 620 mA ... 120 mA

Power consumption P approx. 3.5 ... 6 W

2 LEDs Signal Meaning

1

2

3 LEDs Signal Meaning

1

2

3 red Transmitting

Installation

Installation of standard cameras:

Connect the camera using an ▪
appropriate cable (at least Cat­5e) to the GigE board on your
PC (8P8C mod jack)

If required, connect a trigger ▪
and / or flash to the 4-pin M8
male connector

CC

Connect the camera to power supply ▪

Installation of cameras with PoE:

Connect the camera using an appropriate cable (at least Cat-5e) to a free port of a ▪
PoE capable ethernet switch

Establish the connection between switch and GigE board on your PC ▪

If required, connect a trigger and / or flash to the 4-pin M8 male connector ▪

green Power on
yellow Readout active
green Link active
green ash Receiving
yellow Transmitting
yellow / red ash Receiving and Transmitting

green Power on
yellow Readout active
green Link active
green ash Receiving

Installation sample

1 - PCI board; 2 - GigE cable;

3 - Cable for trigger and ash; 4 - Power cable

For Cameras with IP67 housing:

Name Item-No.

IP mounting Adapter 11003947

Notice

Further technical details
available in the respec ive
data sheets.

Installation sample

1 - PCI board;
2 - GigE cable;
3 - PoE capable ethernet switch
or Baumer PoE components;

4 - Cable for trigger and ash