bauknecht WAK 8660 PROGRAMME CHART
40105257GB.fm Page 1 Monday, September 5, 2005 8:02 PM
GB WAK 8660 PROGRAMME CHART
This washing machine is equipped
automatic safety functions
and diagnose faults at an early stage and react
appropriately, e.g.:
A. “Pump” indicator
B. “Water tap” indicator
Check your washing machine’s water
supply.
C. “Aquastop” indicator
Programme
Cotton / Hygiene +
Koch-Buntwäsche /
Hygiene+
Synthetic
Pflegeleicht
Daily mixed
Mischwäsche
Rapid wash
Schnelle Wäsche
Delicate
Feinwäsche
Wool
Wolle
Dessous / Handwash
Dessous / Handwäsche
Easy ironing
Leicht bügeln
Spin
Schleudern
Rinse & Spin
Spülen & Schleudern
Drain
Abpumpen
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
with
which detect
A
B
C
Dynamic Intelligence
The
whatever the wash load.
Care
Labels
Normally to heavily soiled bed linen, table linen and
underwear, towels, shirts etc. made of cotton and linen.
For temperature selection, please respect the
manufacturer’s recommendation on the care label.
Selecting “Cotton 95° C”, this programme eliminates
bacteria, ensuring sanitization of your laundry. The bacteria
removal efficiency has been tested following a similar
methodology to the NF EN 13697 standard of Nov. 2001.
Normally soiled blouses, shirts and other outer clothing
made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or mixtures of these fibres with cotton.
Slightly to normally soiled textiles made of cotton and/or
synthetic fibres.
Hardly worn outer and sports clothing made of cotton,
polyester, polyamid and mixed cotton fabrics.
Curtains and delicate dresses, skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the
woolmark and identified as machine washable.
Textiles made of linen, silk, wool or viscose marked as
“handwashable”.
This cycle is particularly suitable to treat delicate lingerie (use
of a laundry net strongly recommended).
Normally soiled blouses, shirts and other outer clothing
made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or mixtures of these fibres with cotton.
Type of wash/
Degree of soiling
––
––
––––––
D
G
E
technology always guarantees perfect results with maximum efficiency
Max.
load
Kg
6.0
2.5
3.0
3.0
1.5
1.0
1.0
3.0
6.0
6.0
F
Detergent and Additives
Softener Main
❉
❉
❉
❉
❉
❉
❉
❉
wash
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Pre-
wash
–––
❉
––
Start
Delay
Start-
vorwahl
❉❉❉❉ ❉ ❉ ❉
❉❉❉❉ ❉ ❉❉
❉
–
❉
–
❉❉
❉
–
❉
–
❉❉❉❉ ❉ ❉❉
❉
❉
❉
D. “Door locked” indicator
E. “Start” button
F. “Start delay” button with time display
G. Programme sequence indicator
{
J
H. “Spin Speed reduction” button
I. “Reset” button
H I
Selectable Special Options =
Pre-
wash
Vor-
wäsche
–
Intensive
Rinse
Intensiv
Spülen
❉❉❉
Eco +
Öko +
–
–– –
❉
–
–
–– –
–– –
–– – –
––
❉❉❉
❉
Rinse
Speed
hold
reduction
Spül-
Schleudern
stopp
❉❉
❉❉
❉❉
❉❉
❉
–– – – – – –
J. Selectable programmes
Te m p e -
rature
30-40
60-95
1)
30-40-60 1000
40-60 1600
1)
30-40 1000
cold
1)
30-40
2)
1)
Max.
Spin
speed
°C rpm
1600
30 1600
1000
30 400
40 1000
1600
–
20 1600
Notes
“Prewash” can be additionally selected
for heavily soiled laundry at any
temperature.
“Prewash” can be additionally selected
1)
for heavily soiled laundry.
In this programme the spin speed should
be adapted to the fabrics.
–
1)
If you select “Rinse hold” do not leave
1)
items to soak for too long.
If you select “Rinse Hold” do not leave
2)
items to soak for too long. A very gentle
spin is used in this programme.
To lessen creasing, the water quantity is
1)
increased and the clothes are spun very
gently in this programme.
In this programme spinning is intensive.
Same as the spin cycle in the “Cotton”
programme.
Same as the spin cycle in the “Cotton”
programme.
This programme only drains (alternative
method of terminating the programme
after “Rinse Hold” without spinning). In
addition all running programmes can be
cancelled with this programme.
–
5019 401 05257
Black process 45.0° 100.0 LPI
40105257GB.fm Page 2 Monday, September 5, 2005 8:02 PM
CONSUMPTION DATA
*
Programme Te m p e r a t u r e
(°C)
Cotton / Hygiene +
Cotton
Cotton with “Eco +” ****
Cotton
Synthetic
Synthetic
Daily Mixed
Rapid wash
Delicate
Woo l
Dessous / Handwash
Easy ironing
*
**
***
****
consumption values
The
programme duration
The
household conditions and to adapt the programme run time accordingly.
To red u ce th e
drains the water out.
Reference programme for energy label.
water temperature
were measured in normalized conditions in compliance with Standard IEC/EN 60456.
may also vary from the chart values. The washing machine is able to allow for particular
95 6.0 49
60 6.0 44 1.14 2:20
60 6.0 44 1.02 2:30
40 5.0 42 0.70 2:05
60 2.5 60
40 2.5 55 0.60 1:35
40 3.0 48 0.55 1:00
30 3.0 37 0.30 0:30
30 1.5 60 0.50 0:45
40 1.0 60 0.50 0:40
30 1.0 45 0.40 0:35
40 3.0 60 0.60 1:30
, some cold water is added at the end of the main wash cycle, before the pump
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter
“Detergent and Additives” in the instructions for use.
1. Turn the
programme selector knob
to the
desired programme and temperature.
2. The
remaining time display
shows the duration
of the chosen programme (in hours and minutes),
and the lamp over the
“Start”
button flashes.
The programme sequence indicator and the
predefined spin speed indication corresponding
to the selected programme lights up.
USING CHLORINE BLEACH
• Wash your laundry in the desired Cotton
programme, adding an appropriate amount of
chlorine bleach to the SOFTENER chamber
(close the detergent dispenser carefully).
• IMMEDIATELY after end of programme, start
the “Rinse and Spin” programme: if you want,
you can add softener.
SELECT SPECIAL OPTIONS - The
corresponding lights go on (if not selectable:
rapid flashing for 3 seconds)
“Eco +” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption can be achieved.
Wash
Water
Energy
Programme duration
approx.**
(kg)
(l)
***
***
(kWh)
1.90 2:00
0.90 1:45
(hours : minutes)
“Prewash” button
• Only for heavily soiled laundry (e.g. sand or
granular dirt). Programme duration is increased
by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with detergent allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water
without being spun: discoloration of the laundry
and additional creasing are prevented.
• This option is particularly recommended for the
programme “Synthetic” or “Delicate”.
• This function is particularly useful if you want to
postpone spinning to a later time.
The programme has reached the “Rinse
Note:
Hold” when the corresponding light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
appropriate spin cycle for the current programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to “Drain” and press
the “
” button again.
Start
“Spin Speed Reduction” button
• A maximum spin speed is assigned to each
programme.
• Press the button to set another speed for the
spin cycle.
• If no light goes on, the final spin is cancelled.
The water is only drained out.
START DELAY
With the “Start Delay” function the appliance can be
run cheaply e.g. at night, when the electricity is cheaper.
• Press the “Start Delay” button. Select the
programme start from 1 to 24 hours ahead by
pressing the button again.
•Press the
“Start”
button.
The Start Delay indicator light flashes until the
programme starts.
“Start Delay” correction.
• Before “Start” has been pressed:
The preset number of hours can be altered by
continuously pressing the “Start Delay” button.
By pressing the Start Delay button again after the
“24” setting, the time delay can be deleted again
or set again.
After “Start” has been pressed:
The preset number of hours can be reduced by
pressing the “Start Delay” button again; please
note, however, that the washing programme
starts IMMEDIATELY, as soon as you operate it
again with the Start Delay switch 01 setting.
To increase the number of hours preselected,
first turn the programme selector switch to the
“Off” position. Then set the programme and the
additional options again and select the desired
number of hours.
PROGRAMME START
After you have selected the programme and the
additional option, the indicator light over the
“Start”
the programme by pressing the
button flashes. Turn on the tap and start
“Start”
button.
Now the indicator light above the button goes on.
In addition, all programme phases are indicated by the
associated lights. After the end of a programme phase,
the associated indicator light goes out. Thus the
programme sequence indicator moves from left to
right across the wash, rinse and spin phases. At the end
of the programme, only the “End” indicator is still on.
“DOOR LOCKED” INDICATOR
As long as a washing programme is running, the lamp
lights up to show that the door cannot be opened.
When the lamp goes off, the door can be opened again.
If “
” has been pressed, but the door is not
Start
latched, the “Door Locked” indicator flashes for 10
seconds. The door must be pushed shut within this
time. After the 10 seconds, the “Door Locked”
indicator goes out and the
“Start”
button flashes.
The door must then be opened and closed again and
the “
” button must be pressed.
Start
“TROUBLE” INDICATORS
“Pump”
Waste water is not pumped out. Check wether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
“Water Tap”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Aquastop”
Lighting up of the Aquastop indication can be caused
by a leak in the appliance or hose. Please refer to the
“Troubleshooting Guide” in the Instructions for Use.
PROGRAMME END
• The “End” indicator goes on.
1. Set the programme selector knob to the
“Off” position.
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the
same programme section during which the current
programme was interrupted. Therefore do not add
any more detergent.
1. Press the
“Start”
button to interrupt the
programme. The light flashes.
2. Select the new programme (with temperature),
any additional options and - if you wish - another
spin speed.
3. Press the
“Start”
button again to restart the
programme.
• If you are in the “Prewash” programme step, this
additional option cannot be deselected as
described (to do this see “Cancel (Reset) a
running programme before the end”).
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
Press the
“Reset”
button for at least 2 seconds.
Any existing water is drained out before the door
can be opened.
5019 401 05257
Black process 45.0° 100.0 LPI
Loading...