bauknecht WAK 1400 EX/2 PROGRAMME GUIDE

4gb05035.fm Page 1 Friday, February 14, 2003 3:35 PM
GB WAK 1400 EX/2 PROGRAMME GUIDE
This washing machine is equipped with
automatic safety functions
A. “Tap Off” indicator
Check your washing machine's water supply.
B. “Water Stop” indicator
Can be released by excess foaming or a leak in the appliance (see also instructions for use “Troubleshooting”) .
Programme
Cotton
Kochwäsche
Coloured Cotton
Buntwäsche
which detect
Care
Labels
Type of wash/
Degree of soiling
Normally soiled bed linen, table linen and underwear, towels etc. made of cotton and linen.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
A
B
C
Main wash
Yes
Yes
F
Pre-
wash
❉❉❉❉❉❉
❉❉❉❉❉❉
E
D
Max.
load
Kg h
5,0
5,0
Detergent and Additives
Softe-
ner
G
Start
delay
Selectable special options =
Pre-
wash
Vor-
wäsche
I
H
Intensive
Rinse
Intensiv
Spülen
{
Rinse
hold
Spül­stopp
reduction
Speed
Schleu-
dern
Tempe -
rature
°C rpm
20
to 95
20
to 60
C. “Door Free” indicator D. “Start/Pause” button E. “Start Delay” button F. Programme sequence indicator
G. Temperature selection buttons H. “Speed Reduction“ button I. Operation indicators
Max.
spin
speed
1400
1400
“Prewash” can be additionally selected for heavily soiled laundry.
“Prewash” can be additionally selected for heavily soiled laundry.
Notes
Slightly to normally soiled blouses, shirts and
Synthetics
Pflegeleicht
Delicate
Feinwäsche
Wool
Wolle
Rapid wash
Schnelle Wäsche
Handwash
Handwäsche
Rinse + Spin
Spülen + Schleudern
Intensive spin
Intensiv Schleudern
Gentle spin
Schonschleudern
Draining / Clearing
Abpumpen/Löschen
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Black process 45.0° 100.0 LPI
–– ––
–– –––
other outer clothing made of polyester (Diolen, Trevira), polyamide (Perl on, Nylon) or cotton blends.
Curtains and delicate dresses, skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Lightly soiled outer garments and sportswear made of cotton, polyester, polyamide and cotton blend.
Textiles made of linen, silk, wool or viscose marked as “handwashable”.
2,5
1,5
1,0
3,0
1,0
5,0
5,0
1,5
❉ ❉
❉ ❉
Yes
Yes
Yes
Yes
Yes
❉❉❉❉❉❉
❉❉❉
– –
––
––– –––
20
1)
to 60
1)
to 40
1)
to 40
to 60
2)
to 30
1)
❉ ❉
❉ ❉
–– ––
–– –
❉❉❉
––– –––
❉❉ ❉❉
❉❉
❉❉
1000
20
1000
20
1000
20
20
20 1400
– –
1400
400
1400
1000
“Prewash” can be additionally selected for
1)
heavily soiled laundry.
1)
If you select “Rinse Hold” do not leave
1)
items to soak for too long.
If you select “Rinse Hold” do not leave items
2)
to soak for too long. A very gentle spin is used in this programme.
Same as the spin cycle in the “Coloured Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Colou red Cot ton” programme.
A very gentle spin is used in this
1)
programme. Same as the spin cycle in the “Wool” programme.
This programme only drains (alternative method of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme.
5019 401 05035
4gb05035.fm Page 2 Friday, February 14, 2003 3:35 PM
CONSUMPTION DATA
Programme Temperature
White Cotton Coloured cotton Coloured cotton
Synthetics Synthetics
Rapid wash
Delicate
Wool
Handwash
Consumption values
*
programme duration
** The
particular household conditions and to adapt the programme run time accordingly.
***To reduce
the pump drains the water out.
the water temperature
POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter “Detergent and Additives” in the booklet.
1. Turn the programme selector knob in any direction to the desired programme.
The remaining time display shows the duration of the chosen programme (in hours and minutes) and the pilot lamp above the “Start/Pause” button is flashing.
2. The programme sequence indicator and the indicator with the maximum possible spin speed light up.
3. The temperature can be altered by pressing the “+” or “-” button under the corresponding LED display.
SELECT SPECIAL OPTIONS - The indicator lights go on.
*
Load
(°C)
95 5,0 44*** 1,60 1:55 60 5,0 39 0,95 2:00 40 5,0 39 0,55 2:00 60 2,5 55 0,70 1:30 40 2,5 50 0,50 1:15 30 3,0 35 0,40 0:30 30 1,5 50 0,50 0:45 40 1,0 50 0,50 0:40 30 1,0 35 0,40 0:35
were measured in normalized conditions in compliance with Standard IEC 60456.
may also vary from the chart values. The washing machine is able to allow for
(kg)
, some cold water is added at the end of the main wash cycle, before
Water
(l)
Energy
(kWh)
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This additional option is particularl y suitable for areas with very soft wate r, for washing baby linen and helping people with detergent allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.
• This additional option is particularly recommended for the programme “Synthetics” or “Delicates”.
• This additional function is particularly useful if you want to postpone spinning to a later time.
Note: the programme has reached the “Rinse Hold” when the “Rinse Hold” button light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the programme will terminate automatically
“Prewash” button
• Only for heavily soiled laundry (for example sand or granular dirt). Programme duration is increased by some 15 min.
with the appropriate spin cycle for the current programme.
• If you do not wish to spin the clothes, turn the programme selector knob to “Drain/Cancel” and press the “Start/Pause” button again.
Programme duration **
approx.
(hours : minutes)
“Speed Reduction” button
• A maximum spin speed is assigned to each programme.
• Press the button to set another speed for the spin cycle.
• If the spin speed “0” is selected, the final spin is cancelled. The water is drained out only.
START DELAY
The “Start Delay” allows to run the machine at the consumer's convenience, for example at night when electricity is cheaper.
• Press the “Start Delay” button. Select the programme start from 1 to 19 hours ahead by pressing the button again.
• Press the “Start/Pause” button. The Start Delay indicator light flashes until the programme starts.
• During programme start the remaining time appears in the digital display.
“Start Delay” correction.
• Before the “Start Delay” has been started: The preset number of hours can be altered by continuously pressing the “Start Delay” button. The number of hours can be reduced by first turning the programme selector switch to the “Off” position. Then set the programme again and select the desired number of hours.
• After the “Start Delay” has been started: The preset number of hours can be reduced by pressing the “Start Delay” button again. To increase the number of hours preselected, first turn the programme selector switch to the “Off” position. Then set the programme and the additional options again and select the desired number of hours.
PROGRAMME START
After you have selected the programme and the additional option, the indicator light over the “Start/Pause” button flashes. Turn on the tap and start the programme by pressing the “Start/Pause” button. Now the indicator light above the button goes on.
In addition, all programme phases are indicated by the associated lights. After the end of a programme phase the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. At the end of the programme only the “End” indicator is still on.
DOOR LOCK
In the first 15 minutes after the start of the “Cotton”, “Coloured Cotton” and “Synthetic” programmes the door can be opened to add further laundry. This is not possible if “Rapid Wash” is selected.
PROGRAMME END
• The remaining time display shows “0:00” and the “End” display lights up.
1. Turn the programme selector knob to the “Off” position.
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.
1. Press the “Start/Pause” button to interrupt the programme. The indicator light flashes.
2. Select the new programme (with temperature), any additional options and
- if you wish - another spin speed.
3. Press the “Start/Pause” button again to restart the programme.
• If you are in the “Prewash” programme step this additional option can not be deselected as described (to do this see “Interrupt/Cancel Programme).
CANCEL/DELETE PROGRAMME
1. Press the “Start/Pause” button to interrupt the programme. The indicator light flashes.
2. Set the programme selector to “Drain/ Cancel”. The spin speed “0” and the remaining time “2 minutes” are displayed.
3. Press the “Start/Pause” button to start the “Drain/Cancel” programme.
Black process 45.0° 100.0 LPI
5019 401 05035
Loading...