Original
-
Gebrauchs
anleitung
7GN210
300093
V1/1016
•
•
•
GB/UK
Technical data
---------------------------------------------------------------------------------------------------------------------
Name:
• Clearing trolley 7GN210
for GN containers, GN baking trays, and trays
Code-No.:
Material:
Realization:
Dimensions:
Maximum carrying capacity:
Distance between slots:
Weight:
---------------------------------------------------------------------------------------------------------------------
• Unpack the individual elements and remove the packaging material.
• Check completeness of delivery according to the list below.
•
300093
Nickel-chrome steel
•
Frame: pipes of square section 25.8 x 25.8 mm
Capacity: 7 GN containers 2/1 GN, depth 65 mm;
One front and one back container lock;
4 swivelling rubber castors, Ø 100 mm,
1 buffer, 2 swivelling castors with stoppers;
1 storage space: W 590 x D 670 mm,
maximum carrying capacity: 18 kg;
Easy assembling kit
W 655 x D 740 x H 1010 mm
•
90 kg, 12 kg per slot
•
80 mm
15.8 kg
- 5 -
Delivery range / Part name
Element Number Name
2
2
1
2
2
4
Side parts with 7 preinstalled
guides and 1 container lock per
each one
Cross members
Storage space
Castors with stoppers
Castors without stoppers
Buffers for castors
1
8
8
Allen wrench
Square washers
Bolts
- 6 -
Assembly
Fig. 1
Fig. 2
1. First install 2 cross members to one of initially
assembled side parts of the clearing trolley.
Place square washer between the cross
member and side part and between the side
part and bolt, and tighten those elements with
use of Allen wrench.
2. Connect cross members with another side part
as above.
3. Fix the storage space to the side parts with use
of attached bolts.
4. Put the clearing trolley on its side or shelf and
install the castors buffers to the side parts. Finally
screw 4 castors into the side parts.
Fig. 3
5. Place the clearing trolley on the castors and check its stability.
6. Clearing trolley may be levelled with use of castors by screwing or unscrewing them.
7. After placing the clearing trolley in required place lock 2 castors with
stoppers to prevent the incidental relocation or falling down.
- 7 -
Protection of containers
• Put the containers in the guides as
required and protect them with use
of front and back locks, lifting them
a bit and placing before the
containers (fig. 4).
Fig. 4
Cleaning instructions
• The clearing trolley should be periodically cleaned with use of moistened and
soft cloth.
• Never use any cleaning agents which may scratch the trolley elements surfaces.
• Dry the clearing trolley with soft cloth.
Bartscher GmbH
Franz-Kleine-Str. 28
33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
- 8 -
Loading...