900-400 | 900-800 | 900-1200
295200 - 295201 - 295203
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Service hotline: +49 5258 971-197
www.bartscher.com
Version: 1.0
Date of preparation: 2024-02-13
Original Installation Instructions
EN
295200 3 / 8
EN
Technical data
Name:
Kitchen rail 900-400
Art. No.:
295200
Material:
stainless steel
Designed for:
Series 900
Device width, in mm:
400
Max. load-bearing capacity, in kg:
15
Depth of the surface for placing objects,
in mm:
60
Dimensions (W x D x H), in mm:
390 x 95 x 40
Weight, in kg:
0,81
As an accessory, the kitchen rail 295200 fits the following appliances:
296411
Electric kitchen
296630
Deep fryer
296318
Induction kitchen
2959961
Deep fryer
296303
Bain-marie
296311
Pasta brewer
296105
Work element
2953031
Pasta brewer
296507
Grill plate
2859251
Deep fryer
2955041
Grill plate
2954521
Volcanic lava grill
4 / 8 295200
EN
Name:
Kitchen rail 900-800
Art. No.:
295201
Material:
stainless steel
Designed for:
Series 900
Device width, in mm:
800
Max. load-bearing capacity, in kg:
15
Depth of the surface for placing objects,
in mm:
60
Dimensions (W x D x H), in mm:
790 x 95 x 40
Weight, in kg:
1,5
As an accessory, the kitchen rail 295201 fits the following appliances:
2951131
Gas stove
296106
Work element
2952271
Gas stove
296426
Multi pan
2952171
Gas stove
296510
Grill plate
296421
Electric kitchen
296511
Grill plate
296431
Electric kitchen
2955081
Grill plate
296215
Electric kitchen
2955061
Grill plate
296325
Electric kitchen
296970
Deep fryer
296319
Induction kitchen
2959521
Deep fryer
296304
Bain-marie
2954631
Volcanic lava grill
295200 5 / 8
EN
Name:
Kitchen rail 900-1200
Art. No.:
295203
Material:
stainless steel
Designed for:
Series 900
Device width, in mm:
1200
Max. load-bearing capacity, in kg:
15
Depth of the surface for placing objects,
in mm:
60
Dimensions (W x D x H), in mm:
1190 x 95 x 40
Weight, in kg:
2,1
We reserve the right to implement technical modifications.
As an accessory, the kitchen rail 295203 fits the following appliances:
2951121
Gas stove
2952181
Gas stove
2952291
Gas stove
296217
Electric kitchen
Intended Use
Equipping the 900 series appliances with a kitchen rail is not only a stylish finishing
touch, but also offers optimization in terms of safety and functionality. Increasing
distance from an appliance effectively reduces the risk of burns from contact with
high-temperature zones. In addition, the sturdy design ensures that pots, pans and
plates can be stored comfortably.
6 / 8 295200
EN
Scope of Delivery / Part Name
1. Unpack the kitchen rail and remove all packing materials pursuant to
environmental regulations.
2. Check completeness of delivery according to the list below:
Fig. 1
1. Rail–shelf
2. Template for drilling holes
3. Nut screws (4 pcs)
4. Hexagonal head bolts (4 pcs)
NOTE!
Tools needed: Crimping pliers and a wrench
295200 7 / 8
EN
Assembly
1. To install the kitchen rail, drill the
necessary holes in the device.
2. To this end, apply the included
template for drilling holes from the
outside, as far as it goes, to the edges
of an appliance.
3. Now, drill the holes (2 x left and 2 x
right) at the locations indicated by the
template for drilling holes.
Fig. 2
4. Position the rail so that the holes in it
match the drilled holes.
5. Using crimping pliers, place the nut
screws in the drilled holes.
6. Screw the rail to the housing with
hexagonal head bolts, tightening them
with a wrench.
Fig. 3
The kitchen rail is properly installed when
it is flushed with the top edge of the
housing.
Fig. 4
8 / 8 295200
EN
Cleaning
ATTENTION!
For cleaning, do not use any scouring agents containing solvents nor
corrosive cleaning agents. They may damage the surface.
1. Clean the kitchen rail regularly with warm water and a soft, damp cloth. Use a
mild cleaning agent when required.
2. Dry the kitchen rail with a soft cloth.
Loading...