Barkan 34 User Manual [it]

5 (1)

4 Movement Fold,Rotate,Swivel&Tilt

LED/LCD/Plasma Wall Mount

model

34

!"! ##$%'&%

Distributed by Barkan Mounts LTD

Holon 58815, Israel

34-8-01.2 18/07/12

 

x1

 

 

 

 

 

 

 

 

 

x1

 

 

x4

x3

x3

x1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(( +,+ +-+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

**

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

))

 

 

 

x2

x2

 

 

x8

 

 

 

 

x4

 

 

 

x4

..

x1

x1

x1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tools

 

 

No.2+3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Required

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2A

 

 

 

 

 

 

 

 

 

 

 

 

"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

.7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

2B

 

 

 

 

 

 

 

m/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pto4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15.7"

U

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2C

 

Up to 400mm/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

.6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

15.7"

 

pto6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

U

 

 

 

 

 

 

 

 

 

 

 

 

/103254368739

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Up to 400mm/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

3

3

200X200

3

4A

?'@'ABA CD'EF'@'GIH

4B

5

The anchor must be sunk up to 10 mm(3/8") into the plaster coating

5 :;-< =:>:

Test!

 

30kg / 66lbs

 

 

 

 

 

 

 

Min 4

 

X Max 9

x Min 2

Barkan 34 User Manual

SAFETY

INSTRUCTIONS & WARRANTY

 

 

EN

02

 

 

ES

03

 

 

FR

04

 

 

DE

05

 

 

IT

06

 

 

RU

07

 

 

PT

08

 

 

NL

09

 

 

EL

10

 

 

BG

11

 

 

PL

12

 

 

CS

13

 

 

SL

14

 

 

DA

15

 

 

HU

16

 

 

TR

17

 

 

RO

18

 

 

S

19

 

 

SK

20

 

 

KZ

21

 

 

LV

22

 

 

CN

23

 

 

AR

24

US & Canada

EuropeanStandard

HE

25

Standard

 

 

 

For further information, visit us at:

W W W . B A R K A N M O U N T S . C O M

 

 

EN

SAFETY INSTRUCTIONS & WARRANTY

Caution!! Ignoring the safety instructions may lead to the falling of the mount/ shelf and/or the electrical appliance. If you are not able to/or lack the experience to carry out wall or ceiling installation, contact a suitable professional installer or contact the store of purchase for further advice. If installed by an appropriate professional, please, make sure he/she has the necessary experience in assembling mounts and has read and understood the safety and assembly instructions.

1. Wall/ceiling installation surface – The supplied screws and bolts are only suitable for attaching to walls and ceilings made of: concrete, standard 10 cm or more concrete blocks, wood studs/ joists of minimum depth 10 cm. (Standard 7cm concrete blocks are suitable for the installation of fixed mounts or movement mounts carrying electrical appliances weighing a maximum of 25 kg). Do not install on walls and ceilings made of: gypsum board, drywall, light processed blocks, Silicate boards/bricks, dry, weak or very old blocks or wooden panel! For installation on gypsum or light processed blocks please call an authorized installer or appropriate building specialist to install the product.

2.Position and height of the installed product - Install in such a place where collision with the product will not lead to injuries. Do not install in hallwaysor above beds and chairs.

3.Keep children and unnecessary bystanders away from the assembly area.

4.Tightening of bolts and screws - Carefully tighten all bolts and nuts of 6mm / 1/4 inch

diameter or less, in order to avoid breakage.

5. Installation strength check - After installing the mount/shelf to the wall or

ceiling, perform a strength test of the weight load as indicated in the assembly ins.

6. Checking the electrical component attachment to the mount - Following the installation of your home entertainment component, check that it is well connected, securely attached (per instructions) and can not slip off or disconnect. If unsure regarding the connection of the component to the mount, consult either the store of purchase or visit our website at www.barkanmounts.com and open the FAQ (frequently asked questions) page or contact us through the site.

7. Mounts with quick connect/disconnect mechanism - After connecting your home entertainment component to the mount, make sure it is well connected by pulling slightly on the connection. When disconnecting the component- whilst holding the component firmly, remove the security bolt (if one present), press the disconnect mechanism and remove the component carefully according to the assembly instructions.

8. Periodic maintenance checks - One month after installation, please check that A. The mount is tight against the wall/ceiling. B. The home entertainment component is well attached to the mount/shelf. C. The nuts, bolts and belts (CRT models) have not loosened. Repeat the maintenance checks every six months following installation. If any faults are found, remove

the home entertainment component from the mount and reassemble the mount as per the assembly instructions.

9. Movement mounts - oil slightly all pivot points on installation (except the pivot points inside the LCD/Plasma tilt mechanism) and afterwards once a year or whenever movement becomes difficult. A. TV (CRT)/VCR mounts – To adjust the viewing angle of the componen– push or pull the mount only. Do not push or pull your home entertainment component. B. LCD/Plasma/Projector mounts can be turned and tilted by moving the actual screen or projector. Be careful to carry out all movements gently.

Barkan Mounts Ltd is not responsible for the installation. Please ask your installer for an installation warranty certificate.

PRODUCT LIABILITY - product warranty years appears on product packaging as well as in company website www.barkanmounts.com

Dear Customer - Thank you for purchasing Barkan's high quality product. We wish you many hours of pleasant viewing and listening. Barkan Mounts Ltd. warrants that it will replace or repair this item, free of charge, according to Barkan's discretion if it should prove defective in materials or workmanship. If a claim is made under this guarantee, the product should be returned prepaid freight, with the original purchasing document to your dealer or to Barkan distributor. This warranty does not apply to: 1. Ignoring of safety & assembly instructions. 2. Coating defects. 3. Normal wear. Friction damages. 4. Installing other products to the mount/ shelf, not manufactured by Barkan. 5. Modification or repairs not made by Barkan. 6. Damage caused by accident or force majeure 7. Damage caused by misuse or abuse or harm to the product. 8. Mounting the product to the wall/ ceiling. Installing the electrical appliance to the product. 9. Breakage of the plastic covers.

2

Loading...
+ 24 hidden pages