Barco XDL-4K60 Product Sheet

XDL-4K60

60,000 lumens, 4K, 3-chip DLP RGB laser large venue
projector

b

Stunning experiences
thanks to high-brightness
4K images in REC 2020
colors

b

Low total cost of
ownership thanks to laser
light source and
brightness levels

b

Reduced installation time
through zero alignment

The XDL-4K60 generates no less than 60,000 lumens brightness with
colors that are just extraordinary. For bigger screens, more pixels,
more impact. Plus incredible RGB laser performance, signal flexibility
up to a comfortable 120 Hz, and no alignment.

Images that speak

Offer visitors crisper, more realistic contrast for greater impact with images of
breathtaking depth thanks to their native 4K resolution up to 120Hz. And when you
need it, use brightness up to a massive60K lumens.

Cost-saving design

Want to drive down your cost-per-lumen? A single XDL is the answer. Their RGB
laser light source slash image flicker and lamp-related costs and maintenance (such
as lamp replacements). Compared to xenon projectors, the XDLs also consume 40%
less power - and you can re-use your existing Barco XLD+ lenses. Truly reliable,
expect a lifetime of up to 20,000 hours with minimum downtime.

Easy to set up and use

Installing one projector is always easier than having to install several. It means less
equipment to transport and set up – and fewer possible points of failure. XDL speeds
up installation by reducing alignment time. The projectors provide an exceptional
lens shift of up to 100% so you can install them anywhere you like. You can also
easily match images to your projection surface using on-board real-time warping
and blending.

3D that really stands out

Get the absolute most impact with superb 3D performance based on color
separation using twin wavelengths and a more effective use of light. Forget the issue
of ghosting – there is none. And project onto white rather than silver screens.

PRODUCT SPECIFICATIONS XDL-4K60

Projector type Native 4K 3-chip DLP digital projector up to 120 Hz

Technology 1.38" DMD™ x3

Resolution 4,096 x 2,160

Brightness Up to 56,000 center lumens using HC lenses / Up to 60,000 center lumens using HB lenses

Native contrast ratio 2,800:1 (typical using HC lenses) / 500:1 ANSI contrast (typical) | 2,000:1 (typical using HB lenses) /

Prime lenses HC: 1.13-1.65; 1.35-1.86; 1.46-2.10; 1.65-2.60; 2.00-3.35 / HB : XLD 0.8,1.45-1.8,1.8-2.4,2.2-3.0,2.8-

Optical lens shift V: -100% to +100% / H: +/-40% (lens dependent)

Light source Direct coupled RGB lasers 6P

Light source lifetime Up to 20.000 hours*

Color correction P7

Optical dowser Standard

Orientation Tilt 45° up and 30° downwards | Rotation – 20 degrees / +90 degrees (=Portrait)

Sealed DLP™ core Standard

Inputs Slot 1 :Dual HDBt; HDMI 2.0 (HDCP 2.2); DP 1.2 (HDCP 1.3); Quad SDI/HDSDI/dual

Input resolutions From NTSC up to 4K (4,096 x 2,160) 120 Hz

Picture-in-picture Two sources simultaneously

CLO (constant light output) Standard

ScenergiX Horizontal and vertical edge blending

Integrated web server Yes

Software tools Projector Toolset

Control XLR wired + IR, RS232, Wifi, GSM (opt)

Network connection 10/100 base-T, RJ-45 connection, Wifi (optional)

Dimensions (WxLxH) Projector: 744 x 1,445 x 706 mm / 29.3 x 56.9 x 27.8 inches (with feet, no lens) | Two chillers, each

Weight Projector: 235kg (~520lb) / Chillers: ~115kg (~250lb) per chiller (two chillers needed)

Cooling liquid hose length 2.5-5-10m (8.2-16.4-32.8ft)

Power requirements Projector: 200-240/346-415V 50-60Hz 16A 3W+N+PE (Y connection) / Power cord size range: 4 sq

Ambient temperature 10-35°C (95°F) Max. (projector and chillers)

Operational humidity 5-80% (non condens)

Power consumption Projector @ full laser power: 6.7 kW (2D or Polarization 3D) / 3.6 kW (Barco Laser3D -6P)

3D systems Color3D (Barco Laser3D): Native 6-primary color-3D system. Only requires color filter glasses / Active

Safety class Class 1, RG3

Certifications CE; ETL/UL/FCC

*Note Still offering 80% of initial light output.

450:1 ANSI contrast (typical)

5.5,5.5-8.5

HDSDI/6G/BarcoLink | Slot 2: Quad DP1.2

with the following dimensions: 701 x 701 x 800 mm / 27.6 x 27.6 x 31.5 inches

mm to 6 sq mm, 10AWG to 8AWG /Circuit breaker range: 25A to 40A | 200-240V 3W+PE 28A 50­60Hz (/\-connection) / Power cord size: 6 sq mm, 8AWG / Circuit breaker: 40A
Chillers: 230/400V 3W+N+PE 16A, 2.5 sq mm (Y connection) or 208V / 3W+PE (/\-connection) / Max.
16A per phase

Chillers @ full laser power: 3.0 kW (2D or Polarization 3D) / 2.5 kW (Barco Laser3D -6P)

glasses systems / Polarization recuperation systems

Last updated: 18 Apr 2018

Technical specifications are subject to change without prior notice. Please check www.barco.com for the latest information.

ENABLING BRIGHT OUTCOMES

www.barco.com