Barco WIPG-1600W User Manual
6. Start the MirrorOp (Sender) App
• Make sure that the MirrorOp app is not blocked by
your firewall.
1) When the MirrorOp app download is complete,
double click the file to run it. You will see the user
interface of MirrorOp.
2) The MirrorOp app will automatically locate the
WiPG-1600W. (If not, you can click or input
the hostname/IP in the text box to connect to
the device.) Enter the passcode shown on the
standby screen of the projector/display.
3) Click and start sharing your screen.
wePresent-1D8
Ready
Windows Mac
wePresent-1D8
Ready
Manufacturer: Barco NV
President Kennedypark 35, 8500 Kortrijk, BELGIUM
+32 56 233211
Importer: Barco NV
President Kennedypark 35, 8500 Kortrijk, BELGIUM
+32 56 233211
wePresent-1D8
Input hostname or IP
Windows
CONNECT
wePresent-1D8
Input hostname or IP
Mac
CONNECT
Passcode
Enter the code displayed on
wePresent-1D8
CONNECT
wePresent-1D8
5 6 7 8
OKCANCEL
Input hostname or IP
Windows Mac
wePresent-1D8
Passcode
Enter the code displayed on
wePresent-1D8
5 6 7 8
Input hostname or IP
CONNECT
OKCANCEL
Note:
• See the User’s Manual for more information. You can download the User’s Manual (PDF file) from http://www.mirrorop.com/WiPG-1600/.
• The MirrorOp (Presenter) app for iOS and Android devices can be downloaded from the Apple App Store or Google Play Store.
Warranty Policy:
For warranty terms and conditions, please visit our website at: https://www.barco.com/en/about-barco/legal/warranty-policy.
WiPG-1600W
Quick Start Guide | Version: 3.00
1. Package Contents
• wePresent WiPG-1600W Base Unit
• Power Adapter (DC +5V, 2.6A)
[Manufacturer: ENG ELECTRIC CO.LTD./
Model: 6A-161WP05]
• Two Detachable Antennas
• Wall-Mount Kit
• Quick Start Guide
• Safety Guide
2. Physical Details
• Front Panel
Power Button/
LED Indicator
USB Port (Front)
LED indicator: red - system loading,
blue - system ready
2 USB ports for USB thumb
drive/mouse/keyboard/touch device
Power Button/LED Indicator
USB Port
• Rear Panel
Detachable Antennas
USB Port (Rear)
Ethernet Port
VGA Port
HDMI Port
Audio Jack (3.5mm)
Power Jack (5V/2.6A)
* The USB port can only supply up to 5V/0.5A to the USB thumb
drive/ mouse/ keyboard/ touch device.
* Operation temperature: 0-40°C
* PoE rating: 37-57V/350mA
Two antennas installed for better WiFi
performance
For USB thumb drive/mouse/keyboard/
touch device
10/100/1000M RJ-45 port
For PoE (Power Over Ethernet)
For VGA projector/display
For HDMI projector/display
For speaker
For power adapter
• Bottom Side
Reset Button
To perform a hard reset to restore your WiPG-1600W device to the factory
* * *
default settings, please follow the below procedures:
1. Long press the reset button and hold.
2. Turn on the WiPG-1600W and wait for over 10 seconds until the LED indicator
turns blue.
3. Release the reset button.
4. The WiPG-1600W will be restored to the factory default settings.
For hard reset
Ethernet Port
Detachable Antennas
The power supply shall comply with the LPS
(Limited Power Source) requirements.
Reset Button
USB Port
Power JackAudio Jack HDMI PortVGA Port
3. What You (Might) Need
• Projector/display with VGA/HDMI interface (Required)
• Ethernet cable (Required if you want to disable the WiFi of the
WiPG-1600W)
• Windows or Mac computer
• Apple iPhone, iPad or iPod touch
• Android phone or tablet
• Speaker
• USB mouse/keyboard
• USB touch device
4. Hardware Installation
1) Connect the WiPG-1600W to the projector/display through the VGA/HDMI port and turn on the
projector/display power.
2) Connect the power adaptor to the WiPG-1600W and press the power button to turn on the device. The
system is ready when the LED indicator turns blue.
3) If you disable the WiFi of the WiPG-1600W, you need to connect the device to an existing IT network
through an Ethernet cable.
4) Insert the speaker cable to the WiPG-1600W audio jack for audio output. (A speaker is required for audio
output when using VGA.)
5) Insert the USB mouse/keyboard/touch device to the WiPG-1600W front/rear USB port for OSD (On-Screen
Display) control or remote control.
5. Download the MirrorOp (Sender) App
• Windows Phone/Windows RT not supported by MirrorOp
1) Make sure your PC/Mac is WiFi-enabled, and connect your PC/Mac to
the WiPG-1600W through WiFi. You can find the WiFi network name
(SSID) of your WiPG-1600W device on the standby screen of the
projector/display. [Default SSID is wePresent-xxx (xxx are the last three
characters of the MAC ID shown on the bottom of the WiPG-1600W)]
2) Open the browser of your computer, and enter the IP address or the
device hostname in the address bar of the browser. You can find the IP
address and hostname on the standby screen of the projector/display.
[Default IP address is 192.168.100.10; default hostname is wePresent-xxx
(xxx are the last three characters of the MAC ID shown on the bottom
of the WiPG-1600W)]
3) Now you should be able to see the “Home” page. Click the icon to
download the portable version (guest version) of the MirrorOp Sender
app for Windows (Windows 7/8/10) or Mac (macOS 10.9 and above). [If
you want to know the dierence between the portable version and
installed version of the MirrorOp app, please refer to the User’s Manual.]
Windows
Mac
Loading...