BARCO WePresent WiCS-2100 SET CN WePresent WiCS-2100 SET CN_QSG.pdf

5. Download the MirrorOp (Sender) App

• Windows Phone/Windows RT not supported by MirrorOp

1) Make sure your PC/Mac is WiFi-enabled, and connect your PC/Mac to
the WiCS-2100 through WiFi. You can find the WiFi network name (SSID)
of your WiCS-2100 device on the standby screen of the projector/display.
[Default SSID is WiCS-2100-xxx (xxx are the last three characters of the
MAC ID shown on the bottom of the WiCS-2100).]

6. Start the MirrorOp (Sender) App

• Make sure that the MirrorOp app is not blocked by your firewall.

1) When the MirrorOp app download is complete, double click
on the file to run it. The MirrorOp app will automatically locate the
WiCS-2100. (If not, you can click or input the hostname/IP in the
text box to connect to the device.)

2) You will see the user interface of MirrorOp. Click and start
sharing your screen.

WiCS-2100-3AD

Ready

Windows

WiCS-2100-3AD

Ready

Manufacturer: Barco NV

President Kennedypark 35, 8500 Kortrijk, BELGIUM
[phone]

Importer: Barco NV

President Kennedypark 35, 8500 Kortrijk, BELGIUM
[phone]

2) Open the browser of your computer, and enter the IP address or the
device hostname in the address bar of the browser. You can find the IP
address and hostname on the standby screen of the projector/display.
[Default IP address is 192.168.100.10; default hostname is WiCS-2100-xxx
(xxx are the last three characters of the MAC ID shown on the bottom of
the WiCS-2100).]

3) Now you should be able to see the “Home” page. Click the icon to
download the portable version of the MirrorOp Sender app for Windows
(Windows 7/8/10) or Mac (macOS 10.9 and above). [If you want to know
the dierence between the portable version and the installed version of
the MirrorOp app, please refer to the User’s Manual.]

Windows

Mac

Mac

Note:

• See the User’s Manual for more information. You can download the User’s Manual (PDF file) from

https://www.barco.com/support/wepresent-wics-2100/docs.

• The MirrorOp (Presenter) app for iOS and Android devices can be downloaded from the Apple App Store or Google Play Store.

Warranty Policy:
For warranty terms and conditions, please visit our website at: https://www.barco.com/about-barco/legal/warranty-policy.

WiCS-2100

Quick Start Guide | Version: 4.00

1. Package Contents

• wePresent WiCS-2100 (Base Unit)

• Power Adapter (DC +12V, 2A)
[Manufacturer: Asian Power Devices Inc./Model: WA-24Q12R]

• Wall-Mount Kit

• Quick Start Guide

• Safety Guide

2. Physical Details

• Front Panel

Stand-by Button and
LED Indicator

USB Port (Front)

• Rear Panel

USB Port (Rear)

Ethernet Port

HDMI Port
Audio Jack
Power Jack
Reset Button

* The USB port can only supply up to 5V/0.5A to the USB thumb
drive/ mouse/ keyboard/ touch device.
* Operation temperature: 0-40°C
* PoE rating: 42.5-57V 0.35-0.26A

Standby button: press the button to enter
the standby mode
LED indicator: red - system loading
blue - system ready
USB host 2.0 port for USB mouse/keyboard/
thumb drive/touch device

USB host 2.0 port for USB thumb drive/
mouse/ keyboard/ touch device
10/100/1000M RJ-45 port
For PoE (Power Over Ethernet)
Standard-A, HDMI 1.4b output

3.5mm audio jack, stereo analog output
DC 12V in
Long press the reset button for 8~10 seconds
until the device reboots.

Stand-by Button and LED Indicator

USB Port

Power Jack

Ethernet Port

The power supply shall comply with the LPS
(Limited Power Source) requirements.

USB Port

HDMI Port

Reset Button

Audio Jack

3. What You (Might) Need

• Projector/display with HDMI interface (Required)

• Ethernet cable (Required if you want to disable the WiFi of
the WiCS-2100)

• Windows or Mac computer

• Apple iPhone, iPad or iPod touch

• Android phone or tablet

• Speaker

• USB mouse/keyboard

• USB touch device

4. Hardware Installation

1) Connect the WiCS-2100 to the projector/display through the HDMI port and turn on the projector/
display power.

2) Connect the power adapter to the WiCS-2100 to turn on the device. The system is ready when the
LED indicator turns blue.

3) If you disable the WiFi of the WiCS-2100, you need to connect the device to an existing IT network
through an Ethernet cable.

4) Insert the speaker cable to the WiCS-2100 audio jack for enhanced audio output.

5) Insert the USB mouse/keyboard/touch device to the WiCS-2100 front/rear USB port for OSD
(On-Screen Display) control or remote control.