Barco TWIN INTERFACE Specifications

Page 1
innovators in image processing
Universal VGA interface
TWIN INTERFACE
Wide compatibility
The T
WIN INTERFACE makes it capable of handling all
types of PC graphics standards ranging from VGA up to at least U-XGA resolution (1600 x 1200) coming from PC or Mac and connect them to a projector or professional monitor.
• Very high bandwidth of 300 MHz (at -3dB)
• Compatibility from VGA (640 x 480) up to QXGA resolution (2,048 x 1,532)
• Auto-ranging Power Supply (87 to 240 V AC, 50/60Hz)
Easy-to-use intelligent interface
Most of the adjustments of the interface are aligned automatically or selected very easily.
• Automatic Sync Input and Output detection (LED indication for sync signal)
• ID bit selector allowing emulation of a typical IBM or Mac monitor
• Automatic termination to 75 Ohm of RGB signals from the computer and TTL/Sync signals with a 22K pull-up resistor
Easy to install
The accompanying mounting bracket facilitates installation in any enclosure, underneath tables and against walls.
Barco’s T
WIN
INTERFACE is an easy-
to-use very high RGB bandwidth
interface to connect any desktop
or portable computer (including
IBM-compatible and Apple
computers) to a presentation
device such as a projector or a
professional data monitor.
Page 2
v1.1 - 8 January 2002
Barco Projection
Noordlaan5 - 8520 Kuurne - Belgium Fax (32) (56) 36-8651 E-mail: info.presentations@barco.com
www.presentations.barco.com
The information and data given are typical for the equipment described. However any individual item is subject to change without any notice.
BARCO Projection Systems is an ISO 9001 registered company.
Input
• RGB Analog on D15 connector
• Signal levels: R, G, B: 0.7 Vpp (no sync) or 1 Vpp with sync @ 75 Ohm
• Sync: TTL @ 22 K load
Outputs
• RGB Analog on 5 BNC connectors (to projector or monitor): R, G, B: 0.7 vpp (no sync) or 1 Vpp @ 75 Ohm H, V or Csync: 1.54 Vtt
• RGB Analog loop through on D15 connector (local monitor out): R, G, B: 0.7 vpp (no sync) or 1 Vpp with sync @ 75 Ohm
• Gain fixed to 1
• Two LEDs indicate signal presence on the BNC sync outputs (H & V)
RGB Bandwidth
300 MHz@-3dB
Compatibility
• All desktop or portable computers with resolutions from VGA up to QXGA (2,048 x 1,532 pixels)
• All Macintosh computers with D15 output (an adapter will be needed for older Macintosh computers with DB15 output).
Special Features
• No user settings required: fully automatic sync input and output detection. Three LEDs indicate the detected sync signals (H, V, Csync).
• Rotary switch for ID Bit Termination for most common display modes. This ensures proper functioning of graphics card even when no monitor is connected.
• Rugged full metal design with rubber protection ribs
• Slim and compact design
• Easy mounting
Included Accessories
• 60 cm VGA cable for PC connection
• Bracket and set of wing screws, for easy mounting underneath a table or any other enclosure
• Two power cords for both US and European Power Outlets
AC Power
Auto ranging power supply 87-240 V AC 50/60Hz
Nominal Power Consumption
10 Watt
Safety Regulations
Compliant with UL1950 and EN60950
Electromagnetic Interference
BARCO’s TWIN I
NTERFACE complies
with FCC rules & regulations, part 15 Class B and CE EN55022 Class B
Dimensions
W x H x D: 218 x 45 x 160 mm (8.58 x 1.77 x 6.30 in)
Weight
Net weight: 1.20 kg / 2.64 lbs.
Order Information
TWIN I
NTERFACE R9828960
TWIN INTERFACE Specifications
to monitor
to computer
to monitor
RGBS or RGBHV
on BNC
RGB analog on D15
RGB analog on D15
TWIN I
NTERFACE
Projector
or Monitor
Loading...