Barco MCFD 1219, MCFD 1219 TS User Manual

B4100528 / 03

November2005

MFCD 1219 - MFCD 1219 TS

Installation & User Manual

SAFETY INSTRUCTIONS

• Read the safety and
operating instructions before
operating the apparatus.

• Retain safety and operating
instructions for future
reference.

• Adhere to all warnings on
the apparatus and in the
operating instructions
manual.

• Follow all instructions for
operation and use.

•This apparatus conforms to:
UL60950, cUL60950,
IEC60950, CE

• FCC notice
This equipment has been
tested and found to comply
with the limits of a class B
digital device, pursuant to
Part 15 of the FCC rules.
These limits are designed to
provide reasonable
protection against harmful
interference when the
equipment is operated in a
commercial environment.
This equipment generates,
uses and can radiate radio
frequency energy and, if not
installed and used in
accordance with the
instruction manual, may
cause harmful interference
to radio communications.
Operation of this equipment
in a residential area is likely
to cause harmful
interference in which case

the user will be required to
correct the interference at
his own expense.

• This Class B digital
apparatus complies with
Canadian ICES-003.
Cet appareil numérique de
la classe B est conforme à la
norme NMB-003 du Canada.

Power connection

• Warning: This apparatus
must be earthed!

• Power requirements:
connect the apparatus to an
AC voltage as indicated at
its back. Using a lower
voltage, the apparatus will
not be able to operate. Using
a higher voltage may
damage the apparatus.
If you are not sure of the type
of power supplied, consult
the power company.

• Do not overload wall outlets
and extension cords as this
may result in fire or electric
shock.

• Mains lead protection (U.S.:
Power cord): Supply cords
should be routed so that they
are not likely to be walked
upon or pinched by items
placed upon or against them,
paying particular attention to
cords at plugs and
receptacles.

• Adapter manufacturer:
Linearity Electronics Co.
Ltd., Model: LAD6019AB5,
complies with UL Certified
Class 2 Power adapter or
UL Certified ITE Power
adapter with LPS, and
Suitable ratings.

• Power Supply Cord - Listed,
Detachable, maximum 4.5m
(14.76 ft.) long; rated
minimum 125 V, 2.5 A, Type
SPT-1 flexible cord; one end
terminates in parallel blade
(NEMA 5-20P) grounding­type attachment plug, other
end in appliance coupler.

Water and moisture

• Never expose the
apparatus to rain or moisture.

• Never use the apparatus
near water - e.g. near a
bathtub, washbasin,
swimming pool, kitchen sink,
laundry tub or in a wet
basement.

Ventilation

• Do not cover or block the
ventilation openings in the
cover of the set. When
installing the apparatus in a
cupboard or another closed
location, heed the necessary
space between the set and
the sides of the cupboard.

Installation

• Place the apparatus on a
flat, solid and stable surface
that can bear the weight of at
least 3 monitors. If you use
an unstable cart or stand,
the set may fall, causing
serious injury to a child or
adult, and serious damage
to the equipment.

© 2005 BARCO nv. Allrights reserved.

CONTENTS

1. Overview ....................................................................................................... 5

1.1 Introduction ............................................................................................. 5

Multi-scan capabilities ............................................................................... 5

Touch panel ............................................................................................... 6

1.2 Package contents ................................................................................... 6

Power Saving............................................................................................. 6

1.3 Controls and connectors ............................................................................ 7

2. Installation .................................................................................................... 8

2.1 Precautions ............................................................................................. 8

2.2 Wall mounting ......................................................................................... 8

Step 1: Remove the panel from the foot .................................................... 8

Step 2: Fix the mounting plate to the wall.................................................. 8

Step 3: Place the panel on the mounting plate ......................................... 9

2.3 Connecting the signals......................................................................... 10

To connect the video & sync signals: ...................................................... 1 0

To connect the power: .............................................................................. 1 0

2.5 Install the software................................................................................. 11

2.4 Starting up .............................................................................................. 11

3. On-screen display (OSD) menus............................................................... 12

3.1 How to use the OSD ............................................................................. 1 2

3.2 Description of the menu items ............................................................. 13

Main menu ............................................................................................... 1 3

Color Menu .............................................................................................. 1 4

Clock Menu .............................................................................................. 15

4. Maintenance ............................................................................................... 16

Panel........................................................................................................ 16

Cabinet .................................................................................................... 16

Touch panel ............................................................................................. 16

Appendix A: Possible resolutions .................................................................. 17

Appendix B: Technical specifications ............................................................. 1 8

MFCD 1219 (TS) User's Guide 4

1. OVERVIEW

1.1 Introduction

The MFCD 1219 (TS), BARCO’s full color 19”
LCD display, guarantees perfect image quality in
medical imaging applications.

The display combines a TFT (thin film transistor)
liquid crystal display panel structure and a built-in
backlight with inverter for a better picture quality.
It is designed to meet users' needs for
performance, consistency, and outstanding image
quality through a streamlined development
process in which wall-mount functionality
provides a variety of capability.

The image on the display can be adjusted by
means of the extended on-screen menu system
(OSD).

The internal memory can contain settings for 24
different types of video signals (with different
timings). 22 are factory-preset, 2 are user­definable.

Multi-scan capabilities

The display accepts the most common display
standards. However, it is limited to the following
specifications:

Analog video:
The horizontal frequency must be between 31

and 91 kHz, the vertical frequency between 56
and 85 Hz.

Digital video:
The horizontal frequency must be between 31.47

and 64 kHz, the vertical frequency between 60
and 70 Hz.

The optimum and recommended resolution is
1280 x 1024 / 60 Hz.

MFCD 1219 (TS) User's Guide 5

Power Saving

The monitor comes with a power saving feature;
therefore, you may put the monitor into a power
saving state when it is not in use. This feature
complies with both EPA‘s Energy Star
requirements and European NUTEK/TCO’s
power management guidelines. It conforms to
Video Electronics Standard Association (VESA)
approved DPMS power-down signaling method.
This monitor automatically cuts down power
consumption of monitor set when not detecting
Hsync or Vsync signals. This feature is compliant
with VESA DPMS.

Touch panel

The MFCD 1219 TS is equipped with a touch
panel. Instructions on how to install and use the
touch panel driver and controls can be found in
the "TouchKit, Barco TouchScreen controller
installation and user manual" on the supplied
CD-ROM.

1.2 Package contents

The package should include the following items,
please check. If some of the items are missing,
please contact the reseller you have purchased
the unit from.

- The display with foot

- 12V DC adapter

- European power cord

- American power cord

- UK power cord

- Video cables: VGA cable and DVI-D cable

- Mounting plate with 4 screws

- This user manual

- Calibration software CD-ROM

- USB cable for touch panel

MFCD 1219 (TS) User's Guide 6

1.3 Controls and connectors

(10)

(1) (2) (3) (5) (6) (7) (8) (9)

(4)

(1) 12V DC power input
(2) Analog video input
(3) DVI input (DVI-D supported only)
(4) USB port for touch panel connection to PC

(MFCD 1219 TS only)
(5) Menu key
(6) <-> Key
(7) <+> Key
(8) Power LED

The LED is off when the display is off.

The LED is green when the display is on.

The LED is orange when the display is in

power-saving mode (stand-by)
(9) Power key
(10) Push-button to release the panel from the

foot

MFCD 1219 (TS) User's Guide 7