Barco MATRIXPRO-II 3G-HD-SD-SD, MATRIXPRO-II HD-3G SDI User Manual
MatrixPRO-II
HD/3G SDI series
User manual
Rev. 1.1
o Manual #: 26-0903001-00
o Revision: 01.1
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
Copyright
© Barco. March 09, 2011
All rights reserved. No part of this document may be copied, reproduced or translated. It
shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior
written consent of Barco.
Notice
Barco provides this manual “as is” without warranty of any kind, either expressed or implied,
including but not limited to the implied warranties or merchantability and fitness for a
particular purpose. Barco may make improvements and/or changes to the product(s) and/
or the program(s) described in this publication at any time without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are
periodically made to the information in this publication; these changes are incorporated in
new editions of this publication.
Federal Communications (FCC) Statement
This equipment has been tested and found to comply with the limits for a class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area may
cause harmful interference, in which case the user will be responsible for correcting any
interference.
Guarantee and Compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally
stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all
delivered goods for damage incurred during transport, as well as for material and
manufacturing faults Barco must be informed immediately in writing of any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special
systems and software on the date of commissioning, at latest 30 days after the transfer of
risks. In the event of justified notice of compliant, Barco can repair the fault or provide a
replacement at its own discretion within an appropriate period. If this measure proves to be
impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or
cancellation of the contract. All other claims, in particular those relating to compensation for
direct or indirect damage, and also damage attributed to the operation of software as well as
to other services provided by Barco, being a component of the system or independent
service, will be deemed invalid provided the damage is not proven to be attributed to the
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
2
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
absence of properties guaranteed in writing or due to the intent or gross negligence or part
of Barco.
If the purchaser or a third party carries out modifications or repairs on goods delivered by
Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned
operated incorrectly or if, after the transfer of risks, the goods are subject to influences not
agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
Not included in the guarantee coverage are system failures which are attributed to programs
or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well
as normal maintenance are not subject to the guarantee provided by Barco either.
The environmental conditions as well as the servicing and maintenance regulations
specified in this manual must be complied with by the customer.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered
trademarks or copyrights of their respective holders. All brand and product names
mentioned in this manual serve as comments or examples and are not to be understood as
advertising for the products or their manufactures.
3
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
Company Address
Barco, Inc.
11101 Trade Center Drive
Rancho Cordova,
California 95670 USA
Phone: (916) 859-2500
Fax: (916) 859-2515
Barco N.V.
Noordlaan 5 8520
Kuurne
BELGIUM
Phone: +32 56.36.82.11
Fax: +32 56.35.16.51
Website: www.barco.com
Technical Support
Customer Service Portal — www.barco.com/esupport
(866) 374-7878 — Events (24/7)
(866) 469-8036 — Digital Cinema (24/7)
4
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
Operators Safety Summary
The general safety information in this summary is for operating personnel.
Do not remove panels or covers
There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous
voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the
cover installed.
Power Source
This product is intended to operate from a power source that will not apply more than 230 volts rms
between the supply conductors or between both supply conductor and ground. A protective ground
connection by way of grounding conductor in the power cord is essential for safe operation.
Grounding the Product
This product is grounded through the grounding conductor of the power cord. To avoid electrical
shock, plug the power cord into a properly wired receptacle before connecting to the product input or
output terminals. A protective-ground connection by way of the grounding conductor in the power
cord is essential for safe operation.
Use of the Power Cord
Use only the power cord and connector specified for your product. Use only a power cord that is in
good condition. Refer cord and connector changes to qualified service personnel.
Use of the Proper Fuse
To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating
characteristics. Refer fuse replacement to qualified service personnel.
Do not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
5
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
Terms in This Manual and Equipment Marking
Warning
Highlights an operating procedure, practice, condition, statement,
etc., which, if not strictly observed, could result in injury to or death
of
personnel.
Highlights an essential operating procedure,
NOTE
condition or Statement
Caution
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
AVETISSEMENT!
Le point d´exclamation dans un triangle equilatéral signale à alerter
l´utilisateur qu´il y a des instructions d´operation et d´entretien tres
importantes dans la litérature qui accompagne l´appareil.
VORSICHT
Ein Ausrufungszeichen innerhalb eines gleichwinkeligen Dreiecks
dient dazu, den Benutzer auf wichtige Bedienungs-und
Wartungsanweisungen in der Dem Great beiliegenden Literatur
aufmerksam zu machen.
6
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
Change History
0.0 5/20/10 578607 User’s Guide GKOU
1.1 3/09/11 586286 Added default IP address
Date ECP # Description Approved By
GKOU
Added interface commands appendix
Added MP-II 3G Configuration Tool
7
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
Contents
1.1
Product versions .....................................................................................................10
2 Specifications................................................................................................ 11
2.1
Mechanics ................................................................................................................11
2.1.1
Weight and power consumption ..........................................................................11
2.2
Power Supply ..........................................................................................................11
2.3
Control......................................................................................................................11
2.4
Video specifications................................................................................................12
2.5
Connection details..................................................................................................13
2.5.1
Power Supply pinout..............................................................................................13
3 Configuration ................................................................................................ 14
3.1
SW1 – SW4: Address/Level Not Used...............................................................14
3.2
SW5-SW6: Router mode.......................................................................................14
3.2.1
Router mode on NxN square routers ..................................................................14
3.3
SW7: Power alarm .................................................................................................18
3.4
SW8: Power-up mode............................................................................................18
3.5
Switching time ........................................................................................................19
3.6
Configuring protocol options ................................................................................19
4 LED status indication .................................................................................. 20
4.1
Start-up....................................................................................................................20
4.2
Alarm states ............................................................................................................20
4.3
Ethernet states .......................................................................................................20
5 Router communication................................................................................ 21
5.1
Serial connection ....................................................................................................21
5.1.1
Maximum cable length (RS-232).........................................................................21
5.2
Ethernet connection...............................................................................................22
6 Control Panel operation .............................................................................. 23
6.1
Button description ..................................................................................................23
7 Environmental Specifications .......................................................................... 25
Appendix A .................................................................................................................. 26
A.1 Materials declaration......................................................................................................26
A.2 Recycling information ....................................................................................................27
A.3 Declarations of Conformity..................................................................................................28
Appendix B Remote Commands.............................................................................. 29
B.1 X-Point Take.......................................................................................................................30
8
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
B.2 Request X-Point Status.......................................................................................................31
B.3 Router Ping.........................................................................................................................32
B.4 Level List.............................................................................................................................32
Appendix C Barco MPII-3G Configuration Tool .................................................... 33
9
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
Product overview
This User Manual presents the features, installation and operation procedures of (3G/HD/SDSDI) routers of the Barco MatrixPRO-II series.
− Router models available: 8x8, 16x16 and 32x32
− Communication: TCP/IP and RS-232
− Programmable multi- single- and dual bus control panels
− Ultra Slim frame depth
− Low Power, high reliability design
− Redundant power supply system with front indicators
− Future proof and flexible product range
Barco’s MatrixPRO-II 3G/HS/SD-SDI series is ideal for general events, fixed installations, onair routing, mobile outside broadcast applications and sophisticated A/V applications.
1.1 Product versions
The following versions of the Barco MatrixPRO-II 3G/HD/SD-SDI Routers are available:
1RU, Depth 5cm
R9004661 8x8 HD/3G Digital Video Router
Multirate: 270Mbps-2.97Gbps
Router partitioning.
Reclocking.
R9004660 16x16 HD/3G Digital Video Router
Multirate: 270Mbps-2.97Gbps
Router partitioning.
Reclocking.
2RU, depth 5cm:
R9004662 32x32 HD/3G Digital Video Router
Multirate: 270Mbps-2.97Gbps
Router partitioning.
Reclocking.
10
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
Loading...