Page 1
™
MatrixPRO Digital Series
8x8, 16x16 HD-SDI and 16x16 SDI Matrix Switchers
Features
Inputs on all models meet SMPTE 259M
compliance. The HD-SDI models also meet
SMPTE 292M standards.
Outputs on all models meet SMPTE 259M
compliance. The HD-SDI models also meets
SMPTE 292M and the SDI models also meets
SMPTE 344 compliance.
Three switching modes: Front Panel, External
remote (OPTIONAL) or via MP software GUI
program.
IP (Ethernet) control standard
Front panel lock out
I/O grouping allows specific outputs to be
grouped together.
Vertical interval switching
Large LCD display allows for easy navigation of
menus and provides visual verification of
information.
Fully field programmable to support
upgrades.
Backed by a three-year warranty.
The MatrixPRO Digital Series offers three models of serial digital matrix switchers
for routing of SDI and HDSDI video signals: 8X8, 16X16 HD-SDI and 16X16 SDI. The
HD-SDI models allow users to route either HD-SDI or SDI signals. The SDI unit will
only pass SDI signals. Each input and output is individually isolated. These inputs
can be switched to any one or all outputs with no crosstalk or signal noise between
channels. All models are SMPTE 259M compliant for inputs. The HD-SDI models are
also SMPTE 292 M compliant for input sources.
Units are rack-mountable and each unit includes RS-232/485 capability. All units
come standard with an easy to operate front panel interface for simple input and
output selection. All units can be connected to an optional Remote Control interface
for input and output selection. An Ethernet port for IP control is featured on all
units.
The MatrixPRO Digital Series features the MatrixPRO grouping matrix that allows the
router to be divided into smaller sub switchers, making installation and control
easier. I/O grouping allows specific outputs to be grouped together, such as those
for all HD-SDI formats. All models feature Vertical Interval Switching for all input
channels.
The MatrixPRO routers are designed to work effortlessly with our other Barco Video
Processing products like the Encore as well as stand-alone for custom applications.
Folsom
Page 2
MatrixPRO Digital Series Specifications
VIDEO ROUTING
MatrixPRO-SDI
Input
SMPTE 259M compliant
Matrix-PRO HD-SDI
SMPTE 259M and 292M compliant
Output
Signal Speed
Return Loss
Maximum Cable Length
VIDEO INPUT
Number/signal type 8 or 16 Unbalanced serial data
Connectors
Impedance
VIDEO OUTPUT
Number/signal type 8 or 16 Unbalanced serial data
Connectors
Amplitude
Impedance
Output Jitter
Switching type Vertical Interval Switching (Input Channel 1 is Reference)
ENCLOSURE
Dimension 3.5”H X 17.0” W x 15”D (2U high, full rack width)
Weight
Shipping Weight from Factory
Rack mount
Type
GENERAL
SMPTE 259M and 344M compliant SMPTE 259M and 292M compliant
143,177,270,360 Mbps
-15dB @ 270 Mbps
350m at 270Mbps with Belden 1694A cable
8 or 16 BNC female
75 ohms
8 or 16 BNC female
800mV +\- 10%
75 ohms
0.2 U.I (MAX)
8.89 cm H x 43.2 cm W x 38.1 cm D
17 lbs (7.6 kg)
22 lbs (10kg)
included
Metal
143,177,270,360,1483.5,1485Mbps
-15dB @ 270Mbps and –15dB @ 1.485Gbps
100m @ 1.485Gbps, 350m at 270Mbps
with Belden 1694A cable
Environment Temperature 0-40 degrees C
Environmental Humidity 0-95%, non-condensing
Power Type
Power Connector
Power Dissipation
Agency FCC:Part 15, Subpart B – Class A, EN55022:1998 Class A and EN550024:1998
CONTROL / REMOTE
Serial control port RS-232/ RS-485, 25-pin female D connector
Baud rate and Protocol
Ethernet
Ethernet protocol ARP, ICMP (ping), TCP/IP, Telnet, HTTP
100-240 VAC, 47-63 Hz, auto-configuring
IEC connector with integrated fuse and switch
32 watts
CE: safety EN 60950:1992
57600, 8-bit,1 stop bit, no parity selectable
1 RJ-45 female connector, running 10/100 Base-T, half/full duplex with autodetect
Loading...