Barco Magik II Specifications

Magik II

Universal VGA Interface

Barco’s Magik II is an easy-to-use very

high RGB bandwidth interface to

connect any IG (including IBM-

compatible and Apple computers) to a

presentation device such as a projector or

a professional data monitor.

Wide compatibility

The Magik II makes it capable of handling all types of PC graphics standards ranging
from VGA up to at least QXGA resolution (2,048 x 1,532) coming from an IG,
including PC or Mac and connect them to a projector or professional monitor.

• Very high bandwidth of 300 MHz (at -3dB)

• Compatibility from VGA (640 x 480) up to QXGA resolution (2,048 x 1,532)

• Auto-ranging Power Supply (87 to 240 V AC, 50/60Hz)

Easy-to-use intelligent interface

Most of the adjustments of the interface are aligned automatically or selected very
easily.

• Automatic Sync Input and Output detection (LED indication for sync signal)

• Automatic termination to 75 Ohm of RGB signals from the computer and TTL/Sync

signals with a 22K pull-up resistor

Easy to install

The accompanying mounting bracket facilitates installation in any enclosure,
underneath tables and against walls.

Features and specifications

Inputs

•RGB Analog on 5 BNC

• Signal levels: R, G, B: 0.7 Vpp (no

sync) or 1 Vpp with sync @ 75 Ohm

• Sync: TTL@22K load/Analog

Outputs

• RGB Analog on 5 BNC connectors (to

projector or monitor): R, G, B: 0.7
Vpp (no sync) or 1 Vpp with sync @
75 Ohm
H, V or Csync: 1.54 Vtt

• RGB analog loop through on D15

connector (local monitor out): R, G,
B: 0,7 Vpp (no sync) or 1 Vpp with
sync 75 Ohm

• Gain fixed to 1

• Two LEDs indicate signal presence on

the BNC sync outputs (H&V)

RGB bandwidth

300 MHz @ -3dB

Compatibility

All desktop or portable computers with
resolutions from VGA up to QXGA
(2,048 x 1,532 pixels)

Special features

• No user settings required: fully

automatic sync input and output
detection. Two LEDs indicate the
detected sync signals (H/Csync, V)

• Termination for most common

display modes. This ensures proper
functioning of graphic cards even
when no monitor is connected.

• Rugged full metal design with rubber

protection ribs

• Slim and compact design

• Easy mounting

• TTL/Analog sync input switch

Included accesories

• Bracket and set of wing screws, for

easy mounting underneath a table or
any other enclosure

• Two power cords for both US and

European Power outlets

AC power

Auto ranging power supply
87-240 V AC 50/60Hz

Nominal power consumption

10 Watt

Safety regulations

Compliant with UL1950 and EN60950

Electromagnetic interference

Barco’s Magik II complies with FCC
rules & regulations, part 15 Class B and
CE EN55022 Class B

Dimensions (W x H x D)
218 x 45 x 150 mm

5.58 x 1.77 x 6.30 inch

Weight

1.20 kg / 2.64 lbs.

Order information

Magik II R9828122
19” rack mount R9828970

www.vr.barco.com | www.edutainment.barco.com

Barco Simulation

US Headquarters:

600 Bellbrook Avenue - Xenia, OH 45385-4053

Tel. [phone] • Fax [phone]

email: [e-mail]

European Headquarters:

Noordlaan 5, B8520 Kuurne - Belgium

Tel. [phone] • Fax [phone]

email: [e-mail]

May 2004

Barco Simulation is an ISO 9001 registered company.
The information and data given are typical for the equipment described.
However any individual item is subject to change without any notice.
The latest version of this product sheet can be found on www.simulation.barco.com.

DESIGNED UNDER

ISO

RGBHV from computer

RGBS or
RGBHV
on BNC

RGB analog on D15

IG, desktop or portable computer

IBM-compatible or Mac

Projector or monitor

Magik II interface

Front view

Back view

to loop through monitor

or

IG