Baracoda 2604 User Manual
The bluetooth name and Bluetooth registered trademarks are owned by Bluetooth SIG, Inc., and are used by Baracoda under license. The Baracoda names and Baracoda trademarks are
own by Baracoda. All specifi cation are subject to change without notice - Non contractual pictures © Baracoda - All rights reserved
Baracoda, Inc. (US Offi ce) Baracoda SA (Europe Offi ce: France)
45 Main street - Suite 616 - Brooklyn, NY 11201 30 Avenue de l’Amiral Lemonnier - 78160 Marly-Le-Roi
Ph: 718 488 9600 - Fx: 718 488 9601 Ph: +33 1 30 08 89 00 - Fx: +33 1 30 08 89 98
User Guide
This document is to be used with BC / BL / BLR 2604
2604
Package contents
• 1 barcode scanner (BC2604 or BL2604 or BLR2604).
• 1 Cradle
• 1 CD Rom with documentation and software
• 1 AC charger
• 2 Batteries
2604 User Guide
Table of contents
1
Introduction.............................................................................................................................. 2
2
Installing/replacing batteries ....................................................................................................... 2
3
Proper scanning position ........................................................................................................... 3
4
Quick Start Up guide................................................................................................................. 3
5
LED and Beep signals Summary .................................................................................................4
6
Configuring your scanner ........................................................................................................... 5
6.1
Usage modes..................................................................................................................... 5
6.1.1 Real-Time Mode (default se ting)t
6.1.2 Batch Mode
6.1.3 Master mode
6.2
Reading mode.................................................................................................................... 5
6.2.1 Trigger mode (defaul setting)
6.2.2 Autoscan mode
6.3
Symbology......................................................................................................................... 6
6.4
Data format........................................................................................................................ 6
6.4.1 Acknowledgment:
6.4.2 Prefix/suffix
6.4.3 Baracoda Header
6.4.4 Barcode Identifier
6.5
Beeps and LEDs ................................................................................................................ 6
7
Other functions......................................................................................................................... 7
7.1
Power management............................................................................................................ 7
7.2
Sniff period........................................................................................................................ 7
7.3
Low battery........................................................................................................................ 7
7.4
Security............................................................................................................................. 7
7.5
Firmware upgrade .............................................................................................................. 7
8
Safety/Regulatory...................................................................................................................... 8
................................................................................................................. 5
................................................................................................................ 5
t
............................................................................................................. 5
......................................................................................................... 6
................................................................................................................... 6
.......................................................................................................... 6
.......................................................................................................... 6
..................................................................................... 5
......................................................................................... 5
© Baracoda 2003 Page 1/8
2604 User Guide
Trigg
k
T
1 Introduction
The 2604 is easy to use. Simply press the trigger to scan a barcode. The colour of the LED indicates the
status of the device. A beep indicates when the scanner connects to the remote device and when a barcode is
scanned successfully. Acknowledgement of a completed scan is configurable by the user.
Barcodes can be transmitted in real-time or stored for later transmission to remote host devices/terminals
using Bluetooth wireless technology. You can download software & firmware updates as well as additional
documentation from
Scanner features:
http://www.baracoda.com/download after registration.
Scan area
er
Batteries inside
Side view Bottom view
Battery cover loc
ri Color LED
Top view Front view
Chargingcradle
2 Installing/replacing batteries
Only use Baracoda approved rechargeable batteries. The use of any other batteries may damage the scanner
and void the warranty. Please remove the batteries when you are storing the scanner for more than 30 days.
1. To insert batteries into the 2604, push the lock button away from the battery cover.
2. Slide the battery lid downwards.
3. Insert the two (2) AA batteries as indicated inside the battery compartment.
4. Slide the cover up and lock.
Notice: Fully charge batteries before first use.
© Baracoda 2003 Page 2/8
Loading...