Banner SMB18UR Mounting Bracket User Manual

SMB18UR Mounting Bracket

For use with T18, S18, M18 and MINI-BEAM Sensors

Printed in USA P/N 53273

2X #10-32 x 1/2"
Screw

2X #10
Lock Washer

2X #10
Flat Washer

137.2 mm
(5.40")

41.7 mm
(1.64")

Material: 300 Series Stainless Steel

p/n 53273 Rev. A

66.0 mm
(2.60")

ø30.5 mm

25.4 mm
(1.00")

27.2 mm
(1.07")

ø20.3 mm

(0.80")

(1.20")

R2.5 mm

(0.10")

16.0 mm
(0.63 ")

50.8 mm
(2.0")

60º

46.7 mm
(1.84")

2.7 mm
(0.10")

60º

24.6 mm
(0.97")

ø18.3 mm

(0.72")

45.2 mm
(1.78")

20.8 mm

9.7 mm

(0.38")

4X 6.9 mm
(0.27")

SMB18UR Top

(0.82")

41.7 mm
(1.64")

SMB18UR Bottom

60º

41.7 mm
(1.64")

8.1 mm
(0.32")

63.5 mm
(2.50")

25.4 mm
(1.00")

71.1 mm
(2.80")

20.3 mm
(0.80")

20.3 mm
(0.80")

ø30.5 mm

(1.20")

6X #10-32 Thru

2.7 mm
(0.10")

20.8 mm
(0.82")

33.8 mm
(1.33")

Banner Engineering Corp Limited Warranty

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: [phone] • www.bannerengineering.com • Email: [e-mail]

p/n 53273 Rev. A

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year
following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its
manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period.This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of
the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR
IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEAL­ING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO
EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR
ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE
THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,
NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming
any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.

P/N Rev.