Banner Q14 User Manual
Q14 Series
Miniature self-contained dc photoelectric sensors
Printed in USA P/N 45727A0B
Q14 Series Features
• Self-contained dc sensors in miniature right-angle housings
• IP54; NEMA 4 construction; hermetically-sealed optics
• 1.8 m (70") opposed range
• Choose models for light operate or dark operate; choose either NPN (sinking) or
PNP (sourcing) output models
• Choice of integral cable or quick-disconnect connector
• Mounting bracket is included
*A model with a QD connector requires an optional mating cable (see page 4).
Q146E
Q146EQ
1.8 m
(70")
2 m (6.5')
3-Pin Pico-style Pigtail QD
10-30V dc
—
Q14AN6R
Q14AN6RQ
—
2 m (6.5')
3-Pin Pico-style Pigtail QD
NPN
L.O.
L.O.
Q14AP6R
Q14AP6RQ
Q14RN6R
Q14RN6RQ
2 m (6.5')
3-Pin Pico-style Pigtail QD
2 m (6.5')
3-Pin Pico-style Pigtail QD
PNP
D.O.
D.O.
Q14RP6R
Q14RP6RQ
2 m (6.5')
3-Pin Pico-style Pigtail QD
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications.
A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety
Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
Models Range Cable*
Supply
Voltage
NPN/
PNP
L.O./
D.O. Excess Gain Beam Pattern
Q14 Series Opposed-Mode Emitter (E) and Receiver (R)
Infrared, 880 nm
p/n 45727 Rev. C
1000
E
X
C
100
E
S
S
10
G
A
I
N
1
.01 m
.033 ft
.1 m
.33 ft
DISTANCE
Q14 Series
Opposed Mode
1 m
3.3 ft
10 m
33 ft
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
0
0
Q14 Series
Opposed Mode
.5 m
20 in
1.0 m
40 in
DISTANCE
1.5 m
60 in
2.0 m
80 in
2.5 m
100 in
12 in
8 in
4 in
0
4 in
8 in
12 in
!
Q14 Series
page 2
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: 888.373.6767
Receivers with NPN Outputs
Receivers with PNP Outputs
bu
+
–
10-30V dc
bn
bk
Load
bn
+
–
10-30V dc
bu
bk
Load
bu
+
–
10-30V dc
bn
bk
Load
bn
+
–
10-30V dc
bu
bk
Load
Q14 Series Hookups
Cabled Hookup
Cabled HookupCabled Hookup
Quick-Disconnect HookupQuick-Disconnect HookupQuick-Disconnect Hookup
Q14 Series Specifications
Certifications
Supply Protection Circuitry Protected against reverse polarity
Output Configuration SPST solid-state dc switch;
Choose NPN (current sinking) or PNP (current sourcing) models
Choose light operate (N.O.) or dark operate (N.C.) models
Output Rating 150 mA maximum
Off-state leakage current: <10 microamps at 30V dc;
On-state saturation voltage: <0.5V at 10 mA dc; <1.0V at 150 mA dc
Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs
Overload trip point ≥220 mA, typical, at 20ºC
Output Response Time 8 ms ON, 4 ms OFF
Indicators Receivers have two LEDs: Green and Yellow
Green glowing steadily = power to sensor is ON
Green flashing = output is overloaded
Yellow glowing steadily = light is sensed
Yellow flashing = marginal excess gain (1-1.5x) in light condition
Emitter: One GREEN LED indicates power to sensor is ON
Repeatability 1.0 ms
Construction Housings are black ABS; Rated UL 94V0
Lenses are hermetically-sealed glass
Stainless steel M3 mounting hardware is included; stainless steel mounting bracket is included
Environmental Rating IP54; NEMA 4
Connections 2 m (6.5') or 9 m (30') attached cable, or 3-pin Pico-style pigtail quick-disconnect fitting. QD cables are
ordered separately.
Operating Conditions Temperature: -20° to +55°C (-5° to +131°F)
Maximum Relative Humidity: 90% at 50ºC (non-condensing)
Supply Voltage and Current 10 to 30V dc (10% maximum ripple); Emitter: 15 mA; Receiver: 15 mA (exclusive of load)
Emitters
Receivers with NPN Outputs Receivers with PNP Outputs
Emitters
bn
bu
+
-
10-30V dc
bn
10-30V dc
bu
+
–
bk
Loading...