Bang and Olufsen DVD-2 Owners manual

DVD 2

Guide

GUIDE Plus+, SHOW VIEW, VIDEO Plus+, G-LINK are (1) registered trademarks or trademarks of, (2) manufactured under license from and (3) subject of various international patents and patent applications owned by, or licensed to, Gemstar-TV Guide International, Inc. and/or its related afﬁliates.

GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY LIABLE FOR THE ACCURACY OF THE PROGRAM SCHEDULE INFORMATION PROVIDED BY THE GUIDE PLUS+ SYSTEM. IN NO EVENT SHALL GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND / OR ITS RELATED AFFILIATES BE LIABLE FOR ANY AMOUNTS REPRESENTING LOSS OF PROFITS, LOSS OF BUSINESS, OR INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PROVISION OR USE OF ANY INFORMATION,EQUIPMENT, OR SERVICES RELATING TO THE GUIDE PLUS+ SYSTEM.

SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOW VIEW system is manufactured under license from Gemstar Development Corporation.

VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.

G-Code is a registered trademark of Gemstar Development Corporation. The G-Code system is manufactured under license from Gemstar Development Corporation.

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment.

To completely disconnect this equipment

from the AC Mains, disconnect the mains plug from the wall socket. The disconnect device shall remain readily operable.

The lightning flash with arrowhead symbol

within an equilateral triangle, is intended

to alert the user to the presence of un-

insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION

RISK OF ELEC TRIC SHO CK

DO N OT O PEN

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No User-serviceable parts inside. Refer servicing to qualified service personnel.

Introducing the DVD player, 4

Find out how to operate the hard disc recorder and DVD player with the Beo4 remote control and bring up the menus on your television screen.

Daily use, 11

Find out how to play DVD discs, record and play back programmes, how to view the list of hard disc content and the list of timed recordings. This chapter also contains information about how to pause and replay an on-going programme.

Advanced operation, 31

Find out how to use advanced operations such as how to activate Child Lock, divide recordings and how to make preference settings. The chapter also contains information about how to edit DVD discs.

Placement, settings and connections, 45

Find out how to place, connect and set up your product. This chapter also contains an overview of the connection panels and settings available.

Maintenance, 57

Index, 58

DVD 2 is both a DVD player and a hard disc recorder. With both DVD and high capacity hard disc in the same DVD player, you have the ﬂexibility to keep recordings on the hard disc or copy to a recordable DVD disc for safekeeping or later viewing. The hard disc functionality also has a Replay buffer, which allows you to pause an on-going programme and after a short break carry on where you left off.

The DVD player has a built-in GUIDE Plus+ system. This system offers a free programme listings guide for all supported television channels available in your area. You can also use the GUIDE Plus+ system to programme the DVD player to record your favourite television programmes. Not all television channels are supported by the GUIDE Plus+ system.

Note that in some countries the programme listings guide is not available.

Depending on what the main function of your DVD player is to be, you can set it up in three different ways. However, you can access all functionalities of the DVD player regardless of the conﬁguration.

If the main function is to play back DVD discs, make sure that your DVD player is registered as ‘DVD’ in the CONNECTIONS menu of your television. For further information about playback of DVD discs, refer to ‘Play discs’ on page 12.

However, if the main function of your DVD player is hard disc recording, it must be registered as

‘V MEM’* in the CONNECTIONS menu of the tele -

vision. You should also register your DVD player as

‘V MEM’, if it is connected to a system that already

has a DVD player. The DVD button on your Beo4

remote control will in this case be occupied by the

other DVD player and therefore it can not be used for DVD 2. For further information about hard disc recording, refer to ‘Record here and now’ on page 20 and ‘Timer recording’ on page 16.

If the main function of your DVD player is to record here and now, it must be registered as V.AUX2 in the CONNECTIONS menu of your television. If registered as V.AUX2, the DVD player will start op in tuner mode. For further information about recording, refer to ‘Record here and now’ on page 20.

The registration in the CONNECTIONS menu also determines which Beo4 button activates the DVD player; DVD, V MEM or V.AUX2.

Introducing the DVD player

DVD player and hard disc recorder

DVD

VME M

*NOTE! On some Beo4 remote controls, the DTV

button is called SAT and the V MEM button is called V TAPE.

If your DVD player is registered as ‘DVD’, you press the DVD button to switch it on. When you press the DVD button an inserted DVD disc will start playback automatically.

If your DVD player is registered as ‘V MEM’, you press the V MEM button to switch it on. When you press the V MEM button the hard disc content menu will appear on the television screen.

Record programmes

The DVD player gives you the opportunity to

record and store television, satellite (DTV*) and set-top box programmes on the hard disc.

You decide whether to store them temporarily or

permanently. The instant and timed recordings you make are stored in HARD DISC CONTENT, and

the on-going programmes you pause and replay

are put temporarily in a six-hour Replay buffer. If you wish, you can move saved programmes from

the buffer to the HARD DISC CONTENT. You can

also record the programmes stored on the hard disc on a DVD disc.

With this DVD player, you do not have to clutter up your home with piles of video tapes. You can store your recordings on the hard disc and bring up an

overview of recordings on your television screen at any time.

In order to ensure that recordings are not deleted from the hard disc, you can protect them from

automatic deletion. Refer to ‘Protect a recording’ on page 28.

The close-up operation panel

> Press the load button to open or close the

loader.

To load a disc …

Press on the front of the top panel to get access to the close-up operation panel.

> Press the load button on the close -up operation

panel. The loader slides out.

> Place a disc in the loader.

When switched on from standby, the DVD player

takes up to 40 seconds to start up.

The status display …

The status display to the right shows the elapsed

playing time of a DVD disc or a recording or the current track number being played on an audio CD. Switching DVD chapters causes the appropriate chapter number to be shown in the display for a few seconds.

The indicator light …

The DVD player has an indicator light on the right

side of the front panel, which shows its different modes. ORANGE … The DVD player is recording. When

the DVD player receives a record command the orange colour ﬂashes on and off for some seconds before switching to constant orange. While the light indicator ﬂashes on and off the DVD player searches for a matching signal, and you can not switch channel until the signal is found. If you do so, the DVD player will not

record the programme you wish to record. GREEN … The DVD player is on, but not recording. RED … The DVD player is in standby.

Loader

Load but ton

Status display

Indicator light

TV LIGHT RADIO

DTV DVD CD

V MEM RECORD A MEM

7 8 9

4 5 6

TEXT

1 2 3

LIST EXIT

STOP

Introducing the DVD player and Beo4

Using the Beo4 remote control

The Beo4 remote control included with your television gives you access to all functions. When a function is in use, you are informed via displays on Beo4, on the DVD player or on the television screen.

Switch on the DVD player. On some Beo4 remote

controls, the V MEM button is called V TAPE

Move through menu options. During playback,

move to the next or previous chapter in a

recording. Step between frames while playback is

paused

Enter data in on-screen menus or change the

speed of playback. In combination with GO step

backward or forward in playback

Access play mode and accept and store

instructions and settings

Reveal additional functions in the Beo4 display,

such as V.AUX2

Pause an on- going programme. Press to pause

playback of a recording, and press again to stop

playback completely

The Beo4 display window shows the source you have selected

Press to start a manual recording of the selected source, such as television

Enter data in on-screen menus, select a channel number

Bring up the menu overlay

The coloured buttons give you access to different functions, depending on the source you have selected. In combination with GO they give you access to different on-screen menus

Exit menus*

Adjust sound volume; press in the middle to mute the sound

Switch the DVD player and the television to standby

DV D

RECORD

– 9

EXIT

•

DVD

V MEM

LIST

STOP

*NOTE! To exit the EDIT menu, you must press GO

then 3.

On-screen menus allow you to adjust settings and give you access to playback and recording functions.

While the DVD player is

switched on …

Press GO then 0 to bring up the DVD main menu

Press to move between the different menu options and to enter data in the menus

Press to reveal different settings

Press to enter data in the menus

Press to store a setting you have made

Press to select an option in the information bars

Press to leave the menu system and return to the current source

The DVD main menu.

Using the menu system

An explanation of symbols in

the Guide

Buttons on the Beo4 remote control

Display on the Beo4 remote control

GO 0

0–9

GO GO

EXIT

HARD DISC

SOURC E Hard Disc

[EXIT ]

CONTE N

Vide

o Audio Photo

TV LIST

FO RMAT

>> Introducing the DVD player and Beo4

To see which Beo4 buttons activate speciﬁc services or functions, bring up the menu overlay on the screen.

Press MENU then GO in the television menu to bring up the menu overlay

Press the number button that activates the function you want, or …

… press one of the coloured

buttons to activate a function

The menu overlay offers you a

shortcut to various functions.

When you access these functions

outside the menu overlay, you must press GO before pressing a number button or a coloured button.

The Beo4 buttons are shown to the left on the

menu overlay, and the functions they control are shown to the right. Enclosed with this User Guide you ﬁnd a Quick Guide that you can use as guidance, especially when you are in a link room, where you cannot access the menu overlay.

Menu overlay

MENU GO

– 9

DISC MEN U

HDD C ONT EN

TUNER

INFO

BROWS ER

SYSTE M

TIMER

EDIT

BAC

CAM

TV/HD D

JUMP BACK

T/C

JUMP FOR WAR D

DI SC M EN U

HD D C O NT ENT

TU NER

IN FO

BR OWS E R

SY ST EM

TI MER

ED IT

BA C

CA M

TV /HD D

JU MP B AC

T/ C

JU MP F OR WAR D

NOTE! When you press 0 for browser, the hard disc menu will be brought up.

GUIDE Plus+ system

After the GUIDE Plus+ setup and data

download is completed, you can start to explore the different features and areas of

the GUIDE Plus+ system.

> Press and hold GO on the remote control for a

couple of seconds.

> Use

, , or to navigate in the menu and

follow the instructions on the screen.

The GUIDE Plus+ system is divided in six

screen components:

Information Panels … Display instructions on the

GUIDE Plus+ system, programme promotions and advertisements.

Picture Window … Shows the picture of the

current television programme. You can continue to watch the current programme while entering the GUIDE Plus+ system.

Action Bar … Displays the available functions. The

action buttons are activated directly with the respective coloured buttons on the remote control.

Information Field … Displays short programme

descriptions or help menus.

Menu Bar … Displays the GUIDE Plus+ menus and

your current selection.

Grid/Tiles … Displays the T V listings information

by channel and time, seven days in advance.

If certain channels are missing, go to the EDITOR screen to check and change the channels. In the

GUIDE Plus+ menu, press

to go to the menu

bar and then

repeatedly to highlight EDITOR.

Press

to access the EDITOR menu.

20-May 16:47

A Plac e by the Sea: Present ed by See tha Hallet . Stevie McCullum ’s dad used to drive the family down from G lasgow fo r their su mmer holid ays in no rt

ITV [ P 03] 16:00 (60 Min)

Welcome!

What to do

ﬁrst!

Record

Gri

Wed, 1 16:00 17:00

A Pla ce by the Se

Heart bea

Neigh bour

Get a New Lif

e Friends Home and Away

Holly oak

mily Aff airs

Emmer dale

The Agent s The Agent s

Week

o Heart beat Room for improv

The Sec ret

Homes Polic

Search Schedu leMy TV

Channe ls Hom

Action bar

Picture window

Information

panels

Information ﬁe

Menu bar

Grid/Tiles

Daily use

This chapter describes the features you might use on a daily basis, such as how to play DVD discs, record

programmes and play them back and ﬁnally how to edit recordings. With the hard disc recorder you also have the possibility to pause on-going television programmes.

Play discs, 12

• During playback of a disc, 12

• Use DVD on-screen menus,

• Use the toolbar options,

Record a programme, 16

• Timer recording, 16

• Edit Timers, 19

• Record here and now, 20

Pause and replay a programme, 22

• Pause a programme, 22

• During replay, 23

• Replay buffer, 24

Play a recording, 26

• Select the genre of a recording, 26

• Play a recording, 26

• While playing a recording, 27

Edit recordings, 28

• Protect a recording, 28

• Rearrange the list of recordings, 28

• Delete a recording, 29

• Copy a recording, 30

• Name a recording, 30

Play discs

If your DVD player is registered as DVD, playback starts automatically, when you load a disc. If your DVD player is registered as V MEM you must activate playback yourself.

While playing a DVD disc, use the Beo4 remote control to search at varying speeds, step through the disc or bring up a DVD disc menu. You can resume playback of a DVD disc where you stopped last time.

While playing a CD disc, you can pause playback, switch to a new track or select a track by its number.

Note: The DVD player is set for region 2 from the factor y. Discs from other regions will not play on the DVD player as long as it is set for region 2. If you need to have the region changed, contact your retailer. Some discs can not be played on the DVD player due to the conﬁguration, condition of recording or characteristics of the disc.

When playing a disc you have the possibility to change chapters or tracks, pause and stop the disc and play it back in slow motion.

Play and change chapters or tracks on a disc

Load a DVD or CD disc and press

GO then the red button to start

playing the disc, or …

… load a DVD or CD disc and

press GO then 0 to bring up the main menu

Then press

to highlight DVD

then GO to start playing the disc

Press to step between titles, chapters or tracks

Press repeatedly to move to another title, chapter or track on the disc

Enter the title, chapter or track number

Press GO then 8 to change between chapter step and title step

Press GO then 7 to move back in a chapter or title on the disc

Press GO then 9 to move forward in a chapter or title on the disc

Press to wind backwards or forwards during playback of a DVD disc. Press again to change speed

Press STOP to stop winding and

GO to resume playback

Pause, slow or stop a disc

Press to pause playback

Press and hold to start slow playback. Press again to change speed

Press again to stop playback completely, or …

… press to resume playback

During playback of a disc

GO 0

0–9

GO 8

GO 7

GO 9

STOP GO

STOP

NOTE! The factory setting for moving back and forward is ﬁve minutes. To change this interval, refer to page 55 in the chapter ‘Adjust the system setup‘.

In DVD disc menus, you can navigate through

different func tions and options.

While the DVD player is

switched on …

Press GO then 0 in the television

menu to bring up the DVD main

Press GO then the red button to

bring up the disc menu*

Use the arrow keys to move

between options in the menus

Press GO twice to accept your

choice or setting

Press to remove the disc menu

*Not all discs contain a disc menu.

Use DVD on-screen menus

The DVD main menu.

For optimal performance it is recommended not to use larger JPEG ﬁles than approximately one megapixel. For further information about JPEG pictures, refer to ‘Create a slideshow playlist’ on page 38.

GO 0

GO GO

EXIT

Disc formats

Your DVD player is designed to play back

different disc formats. Supported formats are: – DVD-Video – Audio CD – Video CD – Super Video CD – CD-R/ RW – DVD-R/RW, provided that these are recorded

using the DVD Video format and that the disc is ﬁnalised.

– Discs containing mp3 ﬁles are supported if

the sampling frequency is set to 32, 44.1 or 48 Khz. When playing discs with mp3 ﬁles, use

and to change folders.

– Discs containing JPEG ﬁles are supported if

the ﬁle extension is ‘*.JPG’ and not ‘*.JPEG’.

The DVD player can only display DCF-

standard still pictures or JPEG pictures, such as TIFF.

HARD DISC

SOURC E Hard Disc

[EXIT ]

CONTE N

Vide

o Audio Photo

NOTE! If the pincode entr y dialogue appears on the television, this means that the Child Lock was activated for the inser ted disc. You have to enter your four-digit pin code. Refer to ‘Limit access to recordings – Child Lock’ on page 40.

Use the toolbar options

Depending on the disc type you can access different func tions and options, such as soundtrack language, via the system menu.

> During playback, press GO then

1 on the

remote control to bring up the DVD player’s system menu.

> At TOOLBAR, press to highlight OPTIONS.

The available options might vary depending on the situation and disc type.

> Use or to highlight the setting you want to

adjust and press

> Use

to highlight an option.

> Press GO twice to store the setting and leave

the menu, or …

> … press to store the setting and proceed to

another setting.

> Press EXIT to leave the menu.

If the selection in the menu is greyed out, it means the feature is not available or can not be changed in the current state.

The System menu.

>> Play discs

03 TV2 TV2 05-OC T-2006 1 2 . . . PAUSE

Toolbar

Prefe rence s Setup

Navig ate t o menu item.

Optio n

Change subtitle language …

This operation works only on DVD discs with

multiple subtitle languages. You can change to

the language you want while playing the DVD

disc. This function can also be accessed via the green button on the remote control.

> Press

to highlight SUBTITLE and press to

enter its options.

> Press

repeatedly until the language you want

is highlighted, then press

to store the setting.

The languages may be numbered or abbreviated,

such as ‘En’ for English.

Some DVD discs allow subtitle language changes

only via the DVD disc menu. To access the disc menu, press GO then the red button.

Change audio soundtrack language …

This operation works only on DVD discs with

multiple soundtrack languages or VCDs with multiple audio channels. This function can also be accessed via the red button on the remote control.

> Press

to highlight AUDIO and press to enter

its options.

> Press

repeatedly until the audio language you

want is highlighted, then press

to store the setting. The languages may be numbered or abbreviated, such as ‘En’ for English.

Some DVD discs allow soundtrack language

changes only via the DVD disc menu. To access

the Disc Menu, press GO then the red button.

Switch camera angles …

This option is only available with DVD discs that

contain sequences recorded from different camera angles. This allows you to view the picture from different angles.

> Press to highlight ANGLE and press to

enter its options. The camera angles available for selection appear.

> Use or to highlight the camera angle you

want to switch to, then press

to store the

setting.

Zoom in …

This option allows you to enlarge the picture on

the television screen and to pan through the enlarged picture.

> Press

to highlight ZOOM and press to enter zoom in mode. The zoom status bar appears and displays the zoom factor.

> Press the blue button on the remote control to

zoom in or the yellow button to zoom out.

> Use

, , or to pan through the zoomed

picture.

> Press the red button to exit zoom mode.

Search by time …

This option allows you to skip to a speciﬁc point in

the current disc.

> Press

to highlight TIME SEARCH and press

to enter the time ﬁeld (hours : minutes :

seconds).

> Use

0–9 to enter the time where playback should start and press GO twice to store the setting. Playback skips to the time entered.

Record a programme

You can make your DVD player record

an available source or programme at any time you specify. Set a Timer in the GUIDE Plus+ system menu. Your DVD player starts and stops the recording automatically.

You can enter as many as 25 Timers

at one time and up to six hours for each Timer. You can edit or delete your Timers.

To ensure that your Timers are

executed correctly, set the built-in clock to the correct time and date. For further information about time and date settings, refer to

‘Preference settings’ on page 42.

Timer recording

You can make Timer recordings in three

different ways. You can make a manual Timer, you can use a programme listings guide* or you can use a third system, which is called either ShowView, G-Code or Video Plus+ depending on the country you live in.

Manual Timer recording …¨

> Switch on the television to the correct channel

number for the DVD player. > Switch on the DVD player. > Press GO then

2 on the remote control to bring

up the GUIDE Plus+ schedule screen. > Press the green button on the remote control

for MANUAL. The recording date appears.

> Use

, , or or the 0 –9 to enter the

recording date, start and stop time. > Press the green button to store each setting

and move to the next menu item. > When ‘TUNER 01’ appears on the display,

highlight the source and enter the channel.

To select an external input, highlight ‘TUNER”

in the menu and use

or to highlight EX T1,

EXT2 or CAM1.

To select an internal television channel,

highlight ‘01’ in the menu and use 0–9 to enter

the channel.

> Press the green button to store and move to

the next menu item. A virtual keyboard appears on the television. Here you can enter the name of the recording.

> Once complete, press the green button to store

the setting. The Timer recording will be displayed.

> The recording settings are displayed in the pink

tile. To make changes, press the matching coloured button on the remote control.

> Press GO then

2 to store and exit the menu. TIMER will be shown in the display if a timer recording is set.

To repeat the recording …

> Press the red button on the remote control

repeatedly to select the repeat recording setting (Once, Weekly, M-F).

To extend the recording …

> Press the green button on the remote control

repeatedly to select adding extra time (+0, +10,

+20, +30) to the end of recording or select VPS/

PDC (V-P) function. For further information on the VPS/PDC function, refer to page 17.

*NOTE! In some countries the TV programme listings

are not available and therefore the programme listings guide cannot be used to make Timer recordings. However, you can still program Timers manually and with the ShowViev, G-Code or

Video Plus+ recording system.

An example of a manually programmed Timer.

If the DVD player is not in standby mode, a

notiﬁcation message will appear before the timer

recording begins. If you ignore the message, the DVD player will automatically switch to the respective channel and start recording.

During timer recording you cannot change

channel in the DVD tuner.

Note that you can not record programmes

copy-protected by Macrovision.

The VPS/PDC function

The VPS/PDC function ensures that a

programme accompanied by the VPS/PDC signals will be recorded in its full length – even if the programme is delayed or prolonged.

20-May 16:47

Frequenc y: ONCE Timing:

Record ings set:

1/25. VPS/PD C set: 0/25

Record Schedule Freq Ti

ming

Welcome!

What to do

ﬁrst!

Frequenc y

Schedu le Inf o SetupEditor

Timing Home

21-May The Agents ONCE +0

Timer recording (programme listings guide) …

> While the television is switched on, switch on

the DVD player and press GO then

2 on the remote control to bring up the GUIDE Plus+ schedule screen.*

> Use or to highlight a desired television

channel and use

or to highlight a

programme.

> Press GO then

or to scroll up or down a

page at a time. Press GO then

or to go directly to a day before or the next day T V listings.

> Press the red button on the remote control for

RECORD.

> Press EXIT to leave the menu.

* If the GUIDE Plus+ setup menu appears, it means

that this DVD player has not been installed with the GUIDE Plus+ programme data yet. For further information, refer to ‘GUIDE Plus+ system setup’ on page 52.

Timer recording (ShowView /G-Code/Video

Plus+ system) …

Enter the ShowView, G-Code or Video Plus+ programming number associated with your television programme. You can ﬁnd this number in your TV listings magazine.

> While the television is switched on, switch on

the DVD player and press GO then

2 on the remote control to bring up the GUIDE Plus+ schedule screen.

> Press the red button on the remote control to

bring up the ShowView, G- Code or Video Plus+ entry screen.

> Use 0–9 to enter the ShowView, G-Code or

Video Plus+ programming number and press GO twice to store the setting. If an incorrect programming number is entered, you have to select the correct programme number manually. Follow the instructions on the television to edit the date and time.

> The recording settings are displayed in the pink

tile. Press the matching coloured button on the remote control to make changes.

> Press GO and

2 to store and exit the menu. TIMER will be shown in the display if a timer recording is set.

For information on how to repeat and extend a recording, refer to page 16.

>> Record a programme

NOTE! In some countries the TV programme listings are not available and therefore the programme listings guide cannot be used to make Timer recordings. However, you can still program Timers manually and with the ShowViev, G-Code or Video Plus+ recording system.

You can check the Timers that are waiting to

be executed, as well as edit or delete them. If the Timers overlap, this is indicated when the Timer is stored.

> While the television is switched on, switch on

the DVD player and press and hold GO on the

remote control to bring up the GUIDE Plus+ menu.

> Press to highlight a Timer which you want to

delete or edit.

To edit the Timer programme …

> Highlight the Timer and press the green button

on the remote control for EDIT, and follow the instructions on the television to make the necessary changes.

> Press GO and

2 to store and exit the menu

To edit the frequency or timing …

> Highlight the respective tile in the menu and

press the red button to change the frequency or the green button to change the timing.

> Press GO and 2 to store and exit the menu.

To delete a Timer …

> Highlight the Timer and press the red button

on the remote control for DELETE

> Press GO and

2 to store and exit the menu.

If programmed Timers overlap, it will be indicated when you store the Timer. Only partially overlapping

Timers are stored, and the second Timer will not

begin until the ﬁrst has ﬁnished.

Your programmed Timers are listed after start time.

Each Timer is identiﬁed by source, name (if available), start and stop time and date or weekdays.

Abbreviations for days of the week:

M … Monday T … Tuesday W … Wednesday T … Thursday F … Friday S … Saturday S … Sunday

Edit Timers

20-May 16:47

‘Sched ule’ disp lays progr ammes you have Set to Record. Press to use. P ress the g reen butto n for man ua

l record ing. Press to view ‘My TV’. Pres s to vi ew ‘Info

’

Record Schedule Freq Ti

ming

Welcome!

What to do

ﬁrst!

Frequenc y

Grid Searc

h ScheduleM y TV

ming H ome

21-May 18:42 02:25 P01 ONCE +0 21-May The Agents M-F +0 21-May 20:00 21:00 P12 ONCE +0

You can make a recording here and now. You

have the possibility to record one programme and at the same time watch another programme on the hard disc, watch a DVD disc or simply watch another television programme. However in some situations it is not possible to switch to another source or programme.

Record from the DVD tuner and watch

another source at the same time …

> While the DVD player is switched on, press GO

then the yellow button on the remote control

to bring up the DVD tuner. > Use or or 0–9 to select a channel number. > Press RECORD twice*. The DVD player begins

recording the current programme, up to a maximum of six hours, and you can switch to another source:

Watch a hard disc recording

> Press GO then the green button to switch to

the hard disc. > Use or to highlight a recording in the

HARD DISC CONTENT menu and press GO to start playback.

Watch a DVD disc

> Press the load button on the DVD player and

load in a disc to start playback.

Watch television

> Press TV to switch to television mode.

> Press GO then the yellow button to return to

the DVD tuner after you have watched.a recording or a disc, or …

> … press DVD to return to the DVD player. Then

press GO then the yellow button to return to

the DVD tuner after you have watched television. > Press STOP twice to stop a recording. > Press the standby button to switch the system

to standby.

If your DVD player is registered as V MEM or V.AUX2 and not as DVD, you must choose V MEM or V.AUX2 instead of DVD.

During recording you cannot change channel in the DVD tuner.

>> Record a programme

Record here and now

*NOTE! On some Bang & Olufsen televisions you

just need to press RECORD once to start recording. When the DVD player receives a record command, it will start a six-hour recording. If you press RECORD again, it will start a 30 minutes recording instead.

And each time you press RECORD, 30 minutes will

be added to the recording until you reach six hours again.

+ 44 hidden pages

Bang and Olufsen DVD-2 Owners manual

Contents

Introducing the DVD player

DVD player and hard disc recorder

Using the Beo4 remote control

Using the menu system

Menu overlay

GUIDE Plus+ system

Daily use

Play discs

During playback of a disc

Use DVD on-screen menus

Use the toolbar options

Record a programme

Timer recording

Edit Timers

Record here and now