Capacity of air defrost models based on: 10°F T.D., @ +20°F SST (5.5°C T.D., -6.6°C SST)
Capacity of electric and hot gas defrost models based on: 10°F T.D., @ -20°F SST (5.5°C T.D., -28.8°C SST)
* Insert appropriate voltage code: S1 for 115/1/60, S2 for 208-230/1/60. Note: Electric defrost models available only in 208-230/1/60
** R22 at 0 °F SST (-6.6 °C) with coil 30% full.
NOTE:
Defrost heaters can be field converted to operate on 208-230/3/60
Evaporator Capacity Correction Factors for Electric and Hot Gas Defrost Models
F°02010 01-02-03-04-
.pmeTrotaropavEdetarutaS
C°7.6-2.21-8.71-3.32-9.82-4.43-0.04-
rotcaFnoitcerroC
81.151.121.170.100.139.058
60Hz
2632
.0
Electrical Data - 60 Hz
Air Defrost and Hot Gas Defrost Models - 115/1/60 and 208-230/1/60
ledoM
15,14FB/AB
201,78,28,07,26,35FB/AB
351,031,321,501FB/AB
402,471FB/AB
55
2,712FB/AB
603,062FB/AB
FLA = Full Load Amps. MCA = Minimum Circuit Ampacity MOP = Maximum Overcurrent Protection
* Electrical wiring is to be sized in accordance with minimum circuit ampacity
All motors are standard shaded pole type
FLA = Full Load Amps. MCA = Minimum Circuit Ampacity MOP = Maximum Overcurrent Protection
* Electrical wiring is to be sized in accordance with minimum circuit ampacity
All motors are standard shaded pole type
Capacity of air defrost models based on: 10°F T.D., @ +20°F SST (5.5°C T.D., -6.6°C SST)
Capacity of electric and hot gas defrost models based on: 10°F T.D., @ -20°F SST (5.5°C T.D., -28.8°C SST)
* Insert appropriate voltage code: D for 200-220/1/50. Note: 50Hz models available only in 200-220/1/50
** R22 at 0 °F SST (-6.6 °C) with coil 30% full.
NOTE: Defrost heaters can be field converted to operate on 200-220/3/50
sledoMtsorfeDsaG
o/w(thgieW
Electrical Data - 50 Hz
Air Defrost and Hot Gas Defrost Models 200-220/1/50
ledoM
15,14FB/AB
402,471FB/AB
552,712FB/AB
603,062FB/AB
FLA = Full Load Amps. MCA = Minimum Circuit Ampacity MOP = Maximum Overcurrent Protection
* Electrical wiring is to be sized in accordance with minimum circuit ampacity
All motors are standard shaded pole type
Evaporator Capacity Correction Factors for
Electric and Hot Gas Defrost Models
fo.oN
snaF
143.034.051
201,78,28,07,26,35FB/AB
286.077
351,031,321,501FB/AB
320.111.151
463.154.151
507.197.151
640.231.251
V002@ALF*ACMPOM
6SedoClacirtcelE
05/1/022-002
.051
detarutaS
rotaropavE
.pmeT
rotcaFnoitcerroC
50Hz
62
3076414853107
F°0201001-02-03-04-
C°7.6-2.21-8.71-3.32-9.82-4.43-0.04-
81.151.121.170.100.139.058
.0
Electric Defrost Models - 200-220/1/50
rotoMnaF
ledoM
.ytQ
34,53F
B
78,07,35FB
031,501FB
471FB
712FB
062FB
FLA = Full Load Amps. MCA = Minimum Circuit Ampacity MOP = Maximum Overcurrent Protection
* Electrical wiring is to be sized in accordance with minimum circuit ampacity
All motors are standard shaded pole type
143.034.0518895.46.5510.37.351
286.077.05103813.84.01515.59.651
320.111.15154725.216.51023.83.0151
463.154.151315
507.197.15155348.917.42031.314.6102
640.231.25179156.325.92536.516.9152
ALF
V002@
05/1/022-0026SedoClacirtcelE
*ACMPOMsttaW
retaeH
spmA
30.610.02526.012.3151
Optional High Efficiency PSC Fan Motor Data
ledoM
15,14FB/AB
,35FB/AB
402,471FB/AB
552,712FB/AB
603,062FB/AB
FLA = Full Load Amps. MCA = Minimum Circuit Ampacity MOP = Maximum Overcurrent Protection
* Electrical wiring is to be sized in accordance with minimum circuit ampacity
† Insert “S1” for 115/1/60, “S2” for 208-230/1/60 or “S6” for 200-220/1/50 entering service. Electric defrost “S2” is 208-230/1/60 or “S6” for 200220/1/50.
- 4-
2/1
)7.21(
8/31
)9.43(
8/7821
)3723(
4/311
)892(
2/15
)041(
4/3021
)7603(
23/3204
)4301(
)6101(
23/104
)7101(
551/632
)07/701(
Wiring Diagrams
Air Defrost
WITHOUT DEFROST TIME CLOCK WITH DEFROST TIME CLOCK
- 5 -
Wiring Diagrams
Electric Defrost - Single Evaporator with Defrost Heater Contactor
FOR ALL MODELS USING DEFROST HEATER CONTACTOR
- 6 -
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.