Baldor VSSWDM3538 Product Information Sheet

Product Information Packet

VSSWDM3538

.5HP,1765RPM,3PH,60HZ,56C,3516M,TENV,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VSSWDM3538 - .5HP,1765RPM,3PH,60HZ,56C,3516M,TENV,F1

Part Detail

Revision: N Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGM303 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35V824 Layout: 35LYV824 Poles: 04 Created Date: 11-24-2010
Base: N Eff. Date: 08-12-2019 Leads: 9#18

Specs

Catalog Number: VSSWDM3538
Enclosure: TENV
Frame: 56C
Frame Material: Stainless Steel
Output @ Frequency: .500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: N
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3516M
Mounting Arrangement: F1
Power Factor: 64
Product Family: Wash Down All Stainless Steel
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

Current @ Voltage: .900 A @ 460.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 9

Product Information Packet: VSSWDM3538 - .5HP,1765RPM,3PH,60HZ,56C,3516M,TENV,F1

1.800 A @ 230.0 V

1.900 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 9