Baldor VSSSWDM3550T Product Information Sheet
Product Information Packet
VSSSWDM3550T
1.5HP,3500RPM,3PH,60HZ,143TC,3528M,TENV
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: VSSSWDM3550T - 1.5HP,3500RPM,3PH,60HZ,143TC,3528M,TENV
Part Detail
Revision: C Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGR445 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35V257 Layout: 35LYV257 Poles: 02 Created Date: 02-24-2011
Base: N Eff. Date: 11-10-2011 Leads: 9#18
Specs
Catalog Number: VSSSWDM3550T
Enclosure: TENV
Frame: 143TC
Frame Material: Stainless Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 2.000 A @ 460.0 V
4.000 A @ 208.0 V
Inverter Code: Not Inverter
KVA Code: N
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3528M
Mounting Arrangement: F1
Power Factor: 87
Product Family: Super Washdown All Stainless
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
4.000 A @ 230.0 V
Shaft Rotation: Reversible
Page 2 of 10
Product Information Packet: VSSSWDM3550T - 1.5HP,3500RPM,3PH,60HZ,143TC,3528M,TENV
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...