Baldor VSSSWDM3542 Product Information Sheet

Product Information Packet

VSSSWDM3542

.75HP,1740RPM,3PH,60HZ,56C,3519M,TENV,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VSSSWDM3542 - .75HP,1740RPM,3PH,60HZ,56C,3519M,TENV,F1

Part Detail

Revision: C Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGM907 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35V244 Layout: 35LYV244 Poles: 04 Created Date: 02-24-2011
Base: N Eff. Date: 11-10-2011 Leads: 9#18

Specs

Catalog Number: VSSSWDM3542
Enclosure: TENV
Frame: 56C
Frame Material: Stainless Steel
Output @ Frequency: .750 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ

230.0 V @ 60 HZ

460.0 V @ 60 HZ
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 1.080 A @ 460.0 V

2.160 A @ 230.0 V

2.360 A @ 208.0 V

Inverter Code: Not Inverter
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3519M
Mounting Arrangement: F1
Power Factor: 78
Product Family: Super Washdown All Stainless
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Design Code: B

Shaft Rotation: Reversible

Page 2 of 9

Product Information Packet: VSSSWDM3542 - .75HP,1740RPM,3PH,60HZ,56C,3519M,TENV,F1

Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 9