Baldor VNEDM3554 Product Information Sheet

Product Information Packet

VNEDM3554

1.5HP,1755RPM,3PH,60HZ,56C,3534M,TENV,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VNEDM3554 - 1.5HP,1755RPM,3PH,60HZ,56C,3534M,TENV,F1

Part Detail

Revision: F Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGM613 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35E4329 Layout: 35LYE4329 Poles: 04 Created Date: 04-21-2016
Base: N Eff. Date: 03-27-2017 Leads: 9#18

Specs

Catalog Number: VNEDM3554
Enclosure: TENV
Frame: 56C
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CCSA US

CSA EEV

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)

Insulation Class: F
Inverter Code: Inverter Ready
IP Rating: NONE
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Ring Terminals
Motor Type: 3534M
Mounting Arrangement: F1
Power Factor: 76
Product Family: Dirty Duty Plus
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None

Blower: None

RoHS Status: ROHS COMPLIANT

Page 2 of 10

Product Information Packet: VNEDM3554 - 1.5HP,1755RPM,3PH,60HZ,56C,3534M,TENV,F1

Constant Torque Speed Range: 6
Current @ Voltage: 2.100 A @ 460.0 V

4.200 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10