Baldor VAOM3560 Product Information Sheet

Product Information Packet

VAOM3560

.5 AIR OVERHP,850RPM,3PH,60HZ,56C,3528M

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VAOM3560 - .5 AIR OVERHP,850RPM,3PH,60HZ,56C,3528M

Part Detail

Revision: C Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WG5351 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35E2256 Layout: 35LYE2256 Poles: 08 Created Date: 04-10-2014
Base: N Eff. Date: 06-29-2018 Leads: 9#18

Specs

Catalog Number: VAOM3560
Enclosure: TEAO
Frame: 56C
Frame Material: Steel
Output @ Frequency: .500 HP @ 60 HZ
Synchronous Speed @ Frequency: 900 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ

230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Terminal Panel
Motor Lead Termination: None
Motor Type: 3528M
Mounting Arrangement: F1
Power Factor: 46
Product Family: General Purpose
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None

Blower: None

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: VAOM3560 - .5 AIR OVERHP,850RPM,3PH,60HZ,56C,3528M

Current @ Voltage: 1.600 A @ 460.0 V

3.200 A @ 230.0 V

3.400 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10