Baldor V2L525A Product Information Sheet

Product Information Packet

V2L525A

1HP,3450RPM,1PH,60HZ,56C,1728L,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: V2L525A - 1HP,3450RPM,1PH,60HZ,56C,1728L,OPEN,F1

Specs

Catalog Number: V2L525A
Frame: 56C
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 8.700 A @ 208.0 V

7.600 A @ 230.0 V

15.200 A @ 115.0 V
Design Code: N
Drip Cover: No Drip Cover

KVA Code: N
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 16 AWG, A&J
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: None
Motor Type: 1728L
Mounting Arrangement: F1
Power Factor: 68
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End

Shaft Ground Indicator: No Shaft Grounding
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Special Combinations Not Liste
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B

Shaft Rotation: Reversible: Connected Standard

Shaft Slinger Indicator: Shaft Slinger

Speed Code: Single Speed

Motor Standards: NEMA

Starting Method: Direct on line

Thermal Device - Bearing: None

Vibration Sensor Indicator: No Vibration Sensor

Page 2 of 4