Baldor UCME7510 Product Information Sheet
Product Information Packet
UCME7510
7.5-10 AIR OVERHP,3450RPM,3PH,60HZ,184TZ
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: UCME7510 - 7.5-10 AIR OVERHP,3450RPM,3PH,60HZ,184TZ
Part Detail
Revision: K Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGW514 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 36Q213 Layout: 36LYQ213 Poles: 02 Created Date: 03-06-2014
Base: RG Eff. Date: 10-22-2019 Leads: 9#16 30" long Y
Specs
Catalog Number: UCME7510
Enclosure: TEAO
Frame: 184TZ
Frame Material: Steel
Output @ Frequency: 7.500 HP @ 60 HZ
10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Pipe Or Pipe Adaptor
Motor Lead Termination: Flying Leads
Motor Type: 3640M
Mounting Arrangement: F1
Power Factor: 94
Product Family: General Purpose
Product Type: FARM DUTY
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None
Blower: None
RoHS Status: ROHS COMPLIANT
Page 2 of 12
Product Information Packet: UCME7510 - 7.5-10 AIR OVERHP,3450RPM,3PH,60HZ,184TZ
Current @ Voltage: 11.500 A @ 460.0 V
23.000 A @ 230.0 V
23.500 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 12
Product Information Packet: UCME7510 - 7.5-10 AIR OVERHP,3450RPM,3PH,60HZ,184TZ
Nameplate NP1279L
CAT.NO. UCME7510
SPEC. 36Q213W514G2
HP 7.5-10 AIR OVER
VOLTS 230/460
AMP 23/11.5
RPM 3450
FRAME 184TZ HZ 60 PH 3
SER.F. 1.00 CODE G DES B CL F
NEMA-NOM-EFF 86.5 PF 94
RATING 40C AMB-CONT
CC USABLE AT 208V 23.5
DE 6206 ODE 6205
ENCL TEAO SN
Page 4 of 12
Loading...