Product Information Packet
UCL710
7.5-10 AIR OVERHP,3450RPM,1PH,60HZ,182TZ
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: UCL710 - 7.5-10 AIR OVERHP,3450RPM,1PH,60HZ,182TZ
Part Detail
Revision: M Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGW041 CD Diagram: CD0208 Mfg Plant:
Mech. Spec: 36M939 Layout: 36LYM939 Poles: 02 Created Date: 02-09-2010
Base: RG Eff. Date: 10-22-2019 Leads: 2#10 A PH,3#16 B PH 30" long Y
Specs
Catalog Number: UCL710
Enclosure: OPEN
Frame: 182TZ
Frame Material: Steel
Output @ Frequency: 7.500 HP @ 60 HZ
10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
KVA Code: F
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 2 @ 10 AWG, A PH
Motor Lead Exit: Pipe Or Pipe Adaptor
Motor Lead Termination: Flying Leads
Motor Type: 3646LC
Mounting Arrangement: F1
Power Factor: 93
Product Family: General Purpose
Product Type: FARM DUTY
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: Included
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Current @ Voltage: 31.000 A @ 230.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 12
Product Information Packet: UCL710 - 7.5-10 AIR OVERHP,3450RPM,1PH,60HZ,182TZ
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 12
Product Information Packet: UCL710 - 7.5-10 AIR OVERHP,3450RPM,1PH,60HZ,182TZ
Nameplate NP1279L
CAT.NO. UCL710
SPEC. 36M939W041G1
HP 7.5-10 AIR OVER
VOLTS 230
AMP 31-42
RPM 3450
FRAME 182TZ HZ 60 PH 1
SER.F. 1.00 CODE F DES L CL F
NEMA-NOM-EFF 85 PF 93
RATING 40C AMB-CONT
CC USABLE AT 208V
DE 6206 ODE 6205
ENCL OPEN SN
Page 4 of 12