Baldor UCL1015 Product Information Sheet

Product Information Packet
UCL1015
10-15 AIR OVERHP,3450RPM,1PH,60HZ,215Z,3
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: UCL1015 - 10-15 AIR OVERHP,3450RPM,1PH,60HZ,215Z,3
Part Detail
Revision: N Status: PRD/A Change #: Proprietary: No Type: AC Elec. Spec: 37WGW198 CD Diagram: CD0208 Mfg Plant: Mech. Spec: 37M291 Layout: 37LYM291 Poles: 02 Created Date: 01-07-2010 Base: RG Eff. Date: 10-22-2019 Leads: 2#8 A PH,2#14 B PH 32" long Y
Specs
Catalog Number: UCL1015 Enclosure: OPEN Frame: 215Z Frame Material: Steel Output @ Frequency: 15.000 HP @ 60 HZ
10.000 HP @ 60 HZ Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ Voltage @ Frequency: 230.0 V @ 60 HZ XP Class and Group: None XP Division: Not Applicable Agency Approvals: UR
CSA Auxillary Box: No Auxillary Box Auxillary Box Lead Termination: None Base Indicator: Rigid Bearing Grease Type: Polyrex EM (-20F +300F) Blower: None
Inverter Code: Not Inverter KVA Code: G Lifting Lugs: Standard Lifting Lugs Locked Bearing Indicator: Locked Bearing Motor Lead Quantity/Wire Size: 2 @ 8 AWG, A PH Motor Lead Exit: Pipe Or Pipe Adaptor Motor Lead Termination: Flying Leads Motor Type: 3744LC Mounting Arrangement: F1 Power Factor: 89 Product Family: General Purpose Product Type: FARM DUTY Pulley End Bearing Type: Sealed Bearing Pulley Face Code: Standard Pulley Shaft Indicator: Tapped & Key Rodent Screen: Included Shaft Extension Location: Pulley End
Current @ Voltage: 44.000 A @ 230.0 V
Shaft Ground Indicator: No Shaft Grounding
Product Information Packet: UCL1015 - 10-15 AIR OVERHP,3450RPM,1PH,60HZ,215Z,3
Design Code: L Drip Cover: No Drip Cover Duty Rating: CONT Electrically Isolated Bearing: Not Electrically Isolated Feedback Device: NO FEEDBACK Front Face Code: Standard Front Shaft Indicator: None Heater Indicator: No Heater Insulation Class: F
Shaft Rotation: Reversible Shaft Slinger Indicator: No Slinger Speed Code: Single Speed Motor Standards: NEMA Starting Method: Direct on line Thermal Device - Bearing: None Thermal Device - Winding: Normally Closed Thermostat Vibration Sensor Indicator: No Vibration Sensor Winding Thermal 1: None Winding Thermal 2: None
Product Information Packet: UCL1015 - 10-15 AIR OVERHP,3450RPM,1PH,60HZ,215Z,3
Nameplate NP1279L
CAT.NO. UCL1015
SPEC. 37M291W198
HP 10-15 AIR OVER
VOLTS 230
AMP 44-55 RPM 3450
FRAME 215Z HZ 60 PH 1
SER.F. 1.00 CODE G DES L CL F
NEMA-NOM-EFF 84 PF 89
RATING 40C AMB-CONT
CC USABLE AT 208V DE 6307 ODE 6206
ENCL OPEN SN
Loading...
+ 8 hidden pages