Baldor UCC10150 Product Information Sheet
Product Information Packet
UCC10150
10-15HP,3450RPM,1PH,60HZ,215Z,3740C,OPEN
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: UCC10150 - 10-15HP,3450RPM,1PH,60HZ,215Z,3740C,OPEN
Part Detail
Revision: AQ Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGW977 CD Diagram: CD0127 Mfg Plant:
Mech. Spec: 37E764 Layout: 37LYE764 Poles: 02 Created Date:
Base: RG Eff. Date: 01-23-2020 Leads: 2#8 A PH,2#14 B PH 32" LG Y
Specs
Catalog Number: UCC10150
Enclosure: OPEN
Frame: 215Z
Frame Material: Steel
Output @ Frequency: 15.000 HP @ 60 HZ
10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Inverter Code: Not Inverter
KVA Code: C
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 2 @ 8 AWG, A PH
Motor Lead Exit: Pipe Or Pipe Adaptor
Motor Lead Termination: Flying Leads
Motor Type: 3740C
Mounting Arrangement: F1
Power Factor: 98
Product Family: General Purpose
Product Type: FARM DUTY
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: Standard
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: Included
Shaft Extension Location: Pulley End
Current @ Voltage: 41.000 A @ 230.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 12
Product Information Packet: UCC10150 - 10-15HP,3450RPM,1PH,60HZ,215Z,3740C,OPEN
Design Code: Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 12
Product Information Packet: UCC10150 - 10-15HP,3450RPM,1PH,60HZ,215Z,3740C,OPEN
Nameplate NP1279L
CAT.NO. UCC10150
SPEC. 37E764W977
HP 10-15 AIR OVER
VOLTS 230
AMP 41-57
RPM 3450
FRAME 215Z HZ 60 PH 1
SER.F. 1.00 CODE C DES - CL F
NEMA-NOM-EFF 83 PF 98
RATING 40C AMB-CONT
CC USABLE AT 208V
DE 6307 ODE 6206
ENCL OPEN SN
Page 4 of 12
Loading...