Baldor RL1310A277 Product Information Sheet

Product Information Packet

RL1310A277

1HP/1725RPM/1PH/OPEN/NEMA 56/56H

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: RL1310A277 - 1HP/1725RPM/1PH/OPEN/NEMA 56/56H

Part Detail

Revision: AF Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGX507 CD Diagram: CD0085 Mfg Plant:
Mech. Spec: 35E410 Layout: 35LYE410 Poles: 04 Created Date:
Base: RS Eff. Date: 11-27-2018 Leads: 5#18

Specs

Catalog Number: RL1310A277
Enclosure: OPEN
Frame: 56/56H
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 277.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Resilient
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 5.400 A @ 277.0 V

KVA Code: H
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 5 @ 18 AWG
Motor Lead Exit: Terminal Panel
Motor Lead Termination: Flying Leads
Motor Type: 3528L
Mounting Arrangement: F1
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Resilient Mount
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible: Connected Standard

Design Code: L

Shaft Slinger Indicator: No Slinger

Page 2 of 10

Product Information Packet: RL1310A277 - 1HP/1725RPM/1PH/OPEN/NEMA 56/56H

Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter

Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Do Not Use Eve-Not Valiid
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None

Page 3 of 10