Baldor RL1309A Product Information Sheet

Product Information Packet

RL1309A

1HP,3450RPM,1PH,60HZ,56/56H,3520L,OPEN

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: RL1309A - 1HP,3450RPM,1PH,60HZ,56/56H,3520L,OPEN

Part Detail

Revision: AT Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WG0257 CD Diagram: CD0052 Mfg Plant:
Mech. Spec: 35E410 Layout: 35LYE410 Poles: 02 Created Date: 06-21-2007
Base: RS Eff. Date: 03-07-2017 Leads: 4#16 A&J,2#18 B PH,1#14 #1TH

Specs

Catalog Number: RL1309A
Enclosure: OPEN
Frame: 56/56H
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Resilient
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Not Inverter
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 16 AWG, A&J
Motor Lead Exit: Terminal Panel
Motor Lead Termination: Flying Leads
Motor Type: 3520L
Mounting Arrangement: F1
Power Factor: 69
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Resilient Mount
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End

Current @ Voltage: 14.600 A @ 115.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: RL1309A - 1HP,3450RPM,1PH,60HZ,56/56H,3520L,OPEN

7.300 A @ 230.0 V
Design Code: N
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B

Shaft Rotation: Reversible: Connected Standard
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None

Page 3 of 10