Baldor RL1307A277 Product Information Sheet

Product Information Packet

RL1307A277

.75HP,1725RPM,1PH,60HZ,56H,3428L,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: RL1307A277 - .75HP,1725RPM,1PH,60HZ,56H,3428L,OPEN,F1

Part Detail

Revision: A Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGX691 CD Diagram: CD0085 Mfg Plant:
Mech. Spec: 34L986 Layout: 34LYL986 Poles: 04 Created Date: 08-21-2012
Base: RS Eff. Date: 07-19-2018 Leads: 5#18

Specs

Catalog Number: RL1307A277
Enclosure: OPEN
Frame: 56H
Frame Material: Steel
Output @ Frequency: .750 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 277.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Resilient
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 4.200 A @ 277.0 V

KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 5 @ 18 AWG
Motor Lead Exit: Terminal Panel
Motor Lead Termination: Flying Leads
Motor Type: 3428L
Mounting Arrangement: F1
Power Factor: 69
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Resilient Mount
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible: Connected Standard

Design Code: N

Shaft Slinger Indicator: No Slinger

Page 2 of 10

Product Information Packet: RL1307A277 - .75HP,1725RPM,1PH,60HZ,56H,3428L,OPEN,F1

Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Resilient Mount
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter

Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None

Page 3 of 10