Baldor 37B106X636E7 Product Information Sheet

Product Information Packet

37B106X636E7

10HP,1760RPM,3PH,60HZ,215T,3750M,OPSB,F2

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: 37B106X636E7 - 10HP,1760RPM,3PH,60HZ,215T,3750M,OPSB,F2

Part Detail

Revision: AL Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGX636 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37B106 Layout: 37LYB106 Poles: 04 Created Date:
Base: RG Eff. Date: 07-27-2020 Leads: 9#14

Specs

Enclosure: OPSB
Frame: 215T
Frame Material: Steel
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ

230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA

CSA EEV
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3750M
Mounting Arrangement: F2
Power Factor: 83
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None

Blower: None

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: 37B106X636E7 - 10HP,1760RPM,3PH,60HZ,215T,3750M,OPSB,F2

Current @ Voltage: 26.500 A @ 208.0 V

25.000 A @ 230.0 V

12.500 A @ 460.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10