Baldor 35W701L155G2 Product Information Sheet

Product Information Packet

35W701L155G2

1.5HP,1750RPM,3PH,60HZ,145YZ,3526M,TEFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: 35W701L155G2 - 1.5HP,1750RPM,3PH,60HZ,145YZ,3526M,TEFC

Part Detail

Revision: B Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGL155 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35W701 Layout: 35LYW701 Poles: 04 Created Date: 08-03-2016
Base: N Eff. Date: 05-24-2017 Leads: 9#18

Specs

Enclosure: TEFC
Frame: 145YZ
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ

230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3526M
Mounting Arrangement: F3
Power Factor: 72
Product Family: General Purpose
Pulley End Bearing Type: No Bearing
Pulley Face Code: SPECIAL COMBINATIONS NOT LISTE
Pulley Shaft Indicator: SPLINE
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Current @ Voltage: 2.200 A @ 460.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: 35W701L155G2 - 1.5HP,1750RPM,3PH,60HZ,145YZ,3526M,TEFC

4.400 A @ 230.0 V

4.600 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10