Baldor 35U777Y935G1 Product Information Sheet

Product Information Packet

35U777Y935G1

.75KW,1725RPM,1PH,60HZ,D80C,3524LC,TEFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: 35U777Y935G1 - .75KW,1725RPM,1PH,60HZ,D80C,3524LC,TEFC

Part Detail

Revision: P Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGY935 CD Diagram: CD0055 Mfg Plant:
Mech. Spec: 35U777 Layout: 35LYU777 Poles: 04 Created Date:
Base: N Eff. Date: 04-19-2018 Leads: 6#18

Specs

Enclosure: TEFC
Frame: D80C
Frame Material: Steel
Output @ Frequency: .750 KW @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 4.700 A @ 230.0 V

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 18 AWG
Motor Lead Exit: Ko Box W/Term Block
Motor Lead Termination: Ring Terminals
Motor Type: 3524LC
Mounting Arrangement: B14
Power Factor: 88
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None
Shaft Extension Location: Pulley End

9.400 A @ 115.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: 35U777Y935G1 - .75KW,1725RPM,1PH,60HZ,D80C,3524LC,TEFC

Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Frame Prefix: D
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: IEC
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10