Dolphin
Water-Resistant Remote Control
TM
II CE
P/N 40763 Rev. A 03/06/2007
TABLE OF CONTENTS
Introduction..........................3
Features And Functions ...............4-6
Installing Batteries .....................7
Programming TV Control ................8
Setup Codes for TVs ....................8
Programming VCR Control ..............12
Setup Codes for VCRs ..................12
Programming Cable Converter
(or Satellite Receiver) Control ...........15
Setup Codes for Cable Converters .........16
Setup Codes for Satellite Receivers ........16
Programming DVD Control..............17
Setup Codes for DVD Players ............18
Programming CD Control ...............20
Setup Codes for CD Players .............20
Programming Audio Control.............22
Setup Codes for Stereo Receivers .........22
Setup Codes for Stereo Amplifiers.........24
Setup Codes for Automotive and Marine .....24
Searching For Your Code ...............25
Checking The Codes...................26
Reassigning Device Keys................27
Setting Volume Lock...................28
To Change Volume Lock to the CBL/SAT Mode 28
To Change Volume Lock to the TV Mode ....28
To Change Volume Lock to the VCR Mode. . .28
To Change Volume Lock to the DVD Mode . .28
To Change Volume Lock to the CD Mode . . .29
To Change Volume Lock to the RCVR Mode. .29
Clearing Volume Lock .................29
Clearing Volume Lock For One Device .....29
Using the Learning Feature..............30
Feature Reset ........................31
Specifications........................32
Troubleshooting......................32
2
INTRODUCTION
The Universal Dolphin™ II CE Remote is Balboa’s
latest generation remote control. It is designed
with sophisticated technology that will allow you to
consolidate many of your existing remote controls
along with the entertainment system in your spa.
It’s packed with easy-to-use features such as:
• Pre-programmed to operate the cable converter
supplied by your cable system provider
• Pre-programmed technology for easy setup
• Color-coded keys to quickly locate
popular functions
• Code library for video and audio components
• Code Search to help program control of
older components
• Learning function to allow programming with
another infrared (IR) remote
Before you can use your new remote control, you
will need to program it to operate the specific
home entertainment components you wish to
control. Follow the instructions detailed in this
manual to set up your Dolphin Remote and enjoy
your new remote control.
IMPORTANT! PLEASE READ:
When you are required to enter an address into
the spa, please write down the address you have
selected for future reference. Address may need to
be re-entered after servicing
Remote should be stored outside of spa when
not in use. Do not store in direct sunlight.
3
FEATURES AND FUNCTIONS
Use the illustration below to locate the Dolphin™
II Remote features and study the key locations (on
these two pages) to learn how they function.
4
Press POWER once to turn on or off the selected
home entertainment component.
The LED (red light) blinks to show that the remote
control is working and is sending signals.
Use SETUP for all programming sequences.
Press TV, VCR/DVD, CBL/SAT, RCVR, SPA, or CD
once to select a home entertainment component
to control.
See next page for descriptions of the buttons in
this circular area of the remote.
Use volume + (or volume -) to raise (or lower)
the sound volume.
Use CH + (or CH -) to select the next higher (or
lower) channel.
Press MUTE once to turn sound off or on.
Press LAST once to recall the last channel and to
page back one screen in the main menu.
Use these buttons to control available spa functions.
(Depending on your spa, some buttons may
control other equipment than indicated here.)
Use the keypad (0 ~ 9) to directly select channels
(e.g., 09 or 31).
Press MODE once to switch the VCR to view TV
channels or tape. This key will also control the
input select feature on most TVs.
Press ENTER once after entering channel numbers
on some TV models.
In the VCR and TV modes, use the REW, PLAY, FF,
REC, STOP, and PAUSE keys to control your VCR.
To record a program, press REC twice. These keys
are also used for CD and DVD functions.
Continued on next page…
5
FEATURES AND FUNCTIONS
…Continued
Use GUIDE to display the program guide.
Use EXIT to exit out of an on-screen menu
and guide.
Use the four directional keys to move the cursor in
the program guide and menu screens.
Use SELECT to choose options, PPV events, and to
tune programs from the program guide.
Use INFO to display current channel and program
information.
Press MENU once to display an on-screen menu.
6
INSTALLING BATTERIES
(See illustration on opposite page)
1. On the back of the Dolphin Remote, remove
the screws that hold the battery cover in place
and lift off the battery cover.
2 Obtain two (2) fully-charged AA
alkaline batteries.
Match the + and – marks on the batteries to
the + and – marks in the battery case, then
insert the new batteries.
3. Press the battery cover back into place, being
careful to align it with the rubber seal.
4. Replace the screws that hold the battery cover
by carefully starting each one without tightening
it. Once they are all started, snug up one
screw and then do the same to the screw on
the opposite side of the door. Repeat this in a
crossing pattern until all screws are snug.
Do not overtighten them. This will assure an
adequate water seal around the battery cover.
5. Test the unit by pressing any mode key (e.g.,
TV, VCR/DVD, CBL/SAT, RCVR, SPA, or CD).
If the batteries are inserted correctly, the LED
will blink once.
NOTE:
Whenever batteries need to be replaced, the
Dolphin LED will blink twice with every key
press. Simply replace the batteries and the
remote will be restored to its full functionality,
complete with your favorite settings.
7
PROGRAMMING TV CONTROL
Locate the brand name of your TV in the Setup
Codes For TVs section below, and write it in the
following space.
TV Brand:
The brands are listed in alphabetical order with
the most popular codes listed first. You will use
one of these codes to program the Dolphin to
operate your TV:
1. Turn on the TV.
2. On the Dolphin, press TV once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your TV. If you
perform this procedure correctly, the LED will
blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Dolphin at your TV and press POWER
once. The TV should turn off. If it does not
respond, repeat steps 2-4, trying each code for
your brand until you find one that works. If it
still does not work, try searching for the code
(see Searching For Your Code on page 25).
5. Write your TV code in the boxes below for
future reference.
QQQQ
NOTE: Remember, to use the Dolphin to operate
your TV, press TV first.
Setup Codes for TVs:
Admiral 0463, 0093
Advent 0761, 0842
Aiko 0092
Akai 0702, 0672, 0030, 0812
Albatron 0700
Alfide 0672
America Action 0180
Anam 0180
AOC 0030
Apex Digital 0748, 0765, 0879, 0767
Audinac 0180
Audiovox 0451, 0180, 0092, 0623
Aurora Systems 0801
Baysonic 0180
Bell & Howell 0154
Blaupunkt 0763
Blue Sky 1254
Bradford 0180
Broksonic 0463, 0236
Candle 0030
Carnivale 0030
Carver 0054
Casio 1205
8
CCD TV 0463
Celebrity 0000
Celera 0765
Changhong 0765
Cineral 0451, 0092
Citizen 0060, 0030, 0092
Clarion 0180
Concept 0763
Contec 0180
Craig 0180
Crosley 0054
Crown 0180, 0672
Crown Mustang 0672
Curtis Mathes 0047, 0054, 0154, 0451, 0093,
0060, 0702, 0030, 0145, 0166,
1147, 1347
CXC 0180
Daewoo 0451, 1661, 0672, 0092, 0623
Denon 0511, 0145
Dumont 0017
Durabrand 0463, 0180, 0178, 0171
Electroband 0000
Elektra 0017, 1661
Emerson 0154, 0463, 0180, 0236, 0178,
0171, 0623
Envision 0030
Farenheit 1598
Fisher 0154
Fujitsu 0683, 0809
Funai 0180, 0171
Futuretech 0180
Gateway 1755, 1756
GE 0047, 0051, 0451, 0178, 1147,
1347, 1447
Gibralter 0017, 0030
GoldStar 0030, 0178
Goodmans 0360
Gradiente 0053
Grundig 0672
Grunpy 0180
Hallmark 0178
Harman/Kardon 0054
Harvard 0180
Havermy 0093
Hello Kitty 0451
Himitsu 0180
Hisense 0748
Hitachi 0145, 1145
Infinity 0054
Initial 1990
Inteq 0017
IRT 0451, 1661
JBL 0054
JCB 0000
Jensen 0761, 1299
JVC 0463, 0053, 1253, 0731
KEC 0180
Kenwood 0030
Kioto 0054, 0706
KLH 0765, 0767
Kost 1262, 1483
KTV 0180, 0030, 1593
LG 0030, 0178
Loewe 0136
LXI 0047, 0054, 0154, 0156, 0178
M & S 0054
Magnavox 0054, 0706, 0030, 1454, 1254
Marantz 0054, 0030
9
Matsushita 0250, 0650
Megapower 0700
Megatron 0178, 0145
Memorex 0154, 0463, 0150, 0178
MGA 0150, 0030, 0178
Micro Model 1436
Midland 0047, 0017, 0051
Misc 1530
Mitsubishi 0093, 0150, 1250, 0178, 0836
Monivision 0700
Motorola 0093
MTC 0060, 0030
Multitech 0180
NAD 0156, 0178, 0866
NEC 0030, 1704
Nesa 0763
Nikko 0030, 0178, 0092
Noblex 0154
Norcent 0748
NTC 0092
Onwa 0180
Optimus 0154, 0250, 0166, 0650
Optonica 0093
Orion 0463, 0236
Panasonic 0051, 0250, 0650
Penney 0047, 0156, 0051, 0060, 0030,
Philco 0054, 0463, 1661, 0030, 0145
Philips 0054, 1454, 0690
Pilot 0030
Pioneer 0166, 0866, 0679, 1398
Portland 0092
Prima 0761
Princeton 0700
Prism 0051
Proscan 0047, 1347, 1447
Proton 0178
Pulsar 0017
Quasar 0051, 0250, 0650
RadioShack 0047, 0154, 0180, 0030, 0178
RCA 0047, 0060, 1047, 1147, 1247,
Realistic 0154, 0180, 0030, 0178
Runco 0017, 0030
Sampo 0030, 1755
Samsung 0060, 0702, 0030, 0178, 1060,
Sansei 0451
Sansui 0463
Sanyo 0088, 0154
Scotch 0178
Scott 0180, 0236, 0178
Sears 0047, 0054, 0154, 0156, 0178,
Semivox 0180
Semp 0156, 1356
Sharp 0093, 0818, 1393
Sheng Chia 0093
Signet 0800, 0844, 1262
Sony 0000, 1100
Soundesign 0180, 0178
Squareview 0171
SSS 0180
Starlite 0180
Sunbrite 1435, 1420
Supreme 0000
SVA 0748, 0865
0178, 1347
1347, 1447,1547, 0679
0812, 0814, 1575, 1312
0171
10
Loading...