Bakbar GE505C Installation Manual

INSTALLATION AND OPERATION MANUAL

GAS RANGES ELECTRIC
STATIC / CONVECTION
OVENS

GE505 GE54
GE506 GE56
GE508 GE58

For use in GB, IE & DK

230111-16

MANUFACTURED BY

Moffat Limited

Rolleston 7675
New Zealand

INTERNATIONAL CONTACTS

AUSTRALIA

Moffat Pty Limited
Web: www.moffat.com.au
E.Mail: [e-mail]
Main Office: (tel) [phone]

(fax) [phone]

Service: (tel): 1800 622 216
Spares: (tel): 1800 337 963
Customer Service: (tel): 1800 335 315
(fax): 1800 350 281

CANADA

Serve Canada
Web: www.servecanada.com
E.Mail: [e-mail]
Sales: (tel): 800 551 8795 (Toll Free)
Service: (tel): 800 263 1455 (Toll Free)

NEW ZEALAND

Moffat Limited
Web: www.moffat.co.nz
E.Mail: [e-mail]
Main Office: (tel): 0800 663328

UNITED KINGDOM

Blue Seal
Web: www.blue-seal.co.uk
E.Mail: [e-mail]
Sales: (tel): [phone]

(fax): [phone]
Spares: (tel): [phone]
(fax): [phone]
Service: (tel): [phone]
(fax): [phone]

UNITED STATES

Moffat
Web: www.moffat.com
Sales: (tel): 800 551 8795 (Toll Free)

(tel): [phone]
(fax): [phone]
Service: (tel): 800 858 4477 (Toll Free)
(tel): [phone]
(fax): [phone]

REST OF WORLD

Moffat Limited
Web: www.moffat.co.nz
E.Mail: [e-mail]

The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless auth orized previously in
writing by the manufacturer.

In line with policy to continually develop and improve its products, Moffat Ltd. reserves the right to change the specifications and
design without prior notice.

© Copyright Moffat Ltd. December 2014.

Contents List

Blue Seal Gas Range Electric Static/Convection Ovens

GE505 Gas Range Electric Static Oven -750mm wide.
GE506 Gas Range Electric Static Oven - 900mm wide.
GE508 Gas Range Electric Static Oven - 1200mm wide.

GE54 Gas Range Electric Convection Oven - 750mm wide.
GE56 Gas Range Electric Convection Oven - 900mm wide.
GE58 Gas Range Electric Convection Oven - 1200mm wide.

Introduction .............................................................................................. 2

Specification .............................................................................................. 3

Model Numbers Covered in this Specification
General
Gas Supply Requirements
Gas Connection
Electrical Supply Requirements
Electrical Connection

Dimensions ................................................................................................ 7

Installation .............................................................................................. 10

Installation Requirements
Unpacking
Location
Clearances
Assembly
Gas Connection
Electrical Connection
Commissioning

Operation ................................................................................................. 14

Operation Guide
Description of Controls
Open Burners
Griddle
Oven

Cleaning and Maintenance ...................................................................... 17

Before Commencing Cleaning
Open Burner Cleaning
Griddle Plate Cleaning
Oven Interior Cleaning
Stainless Steel Surfaces

Fault Finding ............................................................................................ 20

Wiring Schematic .................................................................................... 22

Gas Conversion and Specifications ......................................................... 25

Conversion Procedure
Gas Specifications

Replacement Parts List ............................................................................ 30

1

Introduction

We are confident that you will be delighted with your BLUE SEAL GAS RANGE ELECTRICAL STATIC /
CONVECTION OVEN and it will become a most valued appliance in your commercial kitchen.

To ensure you receive the utmost benefit from your new Blue Seal appliance, there are two important
things you can do.

Firstly:

Please read the instruction book carefully and follow directions given. The time taken will be well spent.

Secondly:

If you are unsure of any aspect of the installation, instructions or performance of your appliance,
contact your BLUE SEAL dealer promptly. In many cases a phone call could answer your questi on.

CE Only:

These instructions are only valid if the country code appears on the appliance. If the code does not
appear on the appliance, refer to the supplier of this appliance to obtain the technical instructions for
adapting the appliance to the conditions for use in that country.

Warning

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY

DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS APPLIANCE.

INSTRUCTIONS
LOCATION. THIS INFORMATION SHALL BE OBTAINED BY CONSULTING THE LOCAL GAS SUPPLIER.

TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS ARE TO BE POSTED IN A PROMINENT

Warning

Warning

GREAT CARE MUST BE TAKEN BY THE OPERATOR TO USE THE EQUIPMENT SAFELY TO GUARD IT AGAINST RISK OF

FIRE.

 T
 I

 DO NOT



HE APPLIANCE MUST NOT BE LEFT ON UNATTENDED.

T IS RECOMMENDED THAT A REGULAR INSPECTION IS MADE BY A COMPETENT SERVICE PERSON TO

ENSURE CORRECT AND SAFE OPERATION OF YOUR APPLIANCE IS MAINTAINED.

STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPOURS OR LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.



This appliance is for professional use and is only to be used by qualified
persons.



Only authorised service persons are to carry out installation, servicing or gas
conversion operations.



Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.



DO NOT operate the appliance without the legs supplied fitted.

Caution

2

Model Numbers Covered in this Specification

GE505D[1] 4 Open Burners + Electric Static Oven.
GE505C[1] 2 Open Burners + 300 mm Griddle + Electric Static Oven.

GE506D[1] 6 Open Burners + Electric Static Oven.
GE506C[1] 4 Open Burners + 300 mm Griddle + Electric Static Oven.
GE506B[1] 2 Open Burners + 600 mm Griddle + Electric Static Oven.
GE506A[1] 900 mm Griddle + Electric Static Oven.

GE508D[1] 8 Open Burners + Electric Static Oven.
GE508C[1] 6 Open Burners + 300 mm Griddle + Electric Static Oven.
GE508B[1] 4 Open Burners + 600 mm Griddle + Electric Static Oven.
GE508A[1] 2 Open Burners + 900 mm Griddle + Electric Static Oven.

GE54D[1] 4 Open Burners + Electric Convection Oven.
GE54C[1] 2 Open Burners + 300 mm Griddle + Electric Convection Oven.

GE56D[1] 6 Open Burners + Electric Convection Oven.
GE56C[1] 4 Open Burners + 300 mm Griddle + Electric Convection Oven.
GE56B[1] 2 Open Burners + 600 mm Griddle + Electric Convection Oven.
GE56A[1] 900 mm Griddle + Electric Convection Oven.

GE58D[1] 8 Open Burners + Electric Convection Oven.
GE58C[1] 6 Open Burners + 300 mm Griddle + Electric Convection Oven.
GE58B[1] 4 Open Burners + 600 mm Griddle + Electric Convection Oven.
GE58A[1] 2 Open Burners + 900 mm Griddle + Electric Convection Oven.

[1] - Open Burner Options;

F - With Flame Failure Protection.
PF - With Pilot and Flame Failure Protection.

General

Specifications

A heavy duty, general purpose Gas Range with Electric Static / Convection Oven created for compact
modular kitchens. It has a high option Cook Top / Griddle arrangement and is available on industrial
adjustable feet or on robust rollers.

Open Burners are available in either 'PF' (Pilot and Flame Failure) or 'F' (Flame Failure Only) options.
Open Burner and Griddle options are fitted with individual flame failure for each open burner.
Griddles are fitted with pilot, flame failure and piezo ignition as standard. Easy clean stainless steel
external finish.

Easy clean stainless external finish.

3

Specifications

Gas Supply Requirements

- Australia

Input Rate (N.H.G.C.)

- each Open Burner

- each 300mm Griddle Section 21 MJ/hr 21 MJ/hr

Supply Pressure
Burner Operating Pressure (*)
Gas Connection

Natural Gas LP Gas (Propane)

28 MJ/hr

1.13 - 3.40 kPa 2.75 - 4.50 kPa

0.95 kPa 2.6 kPa
See ‘Gas Connection’ information overleaf.

28 MJ/hr

- New Zealand

Input Rate (N.H.G.C.)

- each Open Burner

- each 300mm Griddle Section 21 MJ/hr 21 MJ/hr

Supply Pressure
Burner Operating Pressure (*)
Gas Connection

Natural Gas LP Gas

28 MJ/hr

1.13 - 3.40 kPa 2.75 - 4.50 kPa

0.95 kPa 2.6 kPa
See ‘Gas Connection’ information overleaf.

28 MJ/hr

- United Kingdom

Category: II

2H3P

(20, 37).

Flue Type: A1.

Nominal

Heat Input (nett)

Gas Rate (nett)

Supply Pressure 20 mbar 37 mbar
Burner Operating Pressure (*) 9.5 mbar
Gas Connection See ‘Gas Connection’ information overleaf.

Reduced
Pilot
Nominal
Reduced
Pilot

Natural Gas (G20) Propane (G31)

Open Burner

(each)

6.5 kW 5.5 kW 6.5 kW 5.5 kW

1.75 kW 1.85 kW 1.75 kW 1.95 kW
200W 170W 200W 150W

0.69 m3/hr 0.58 m3/hr 0.51 kg/hr 0.43 kg/hr

0.19 m3/hr 0.20 m3/hr 0.14 kg/hr 0.15 kg/hr

0.02 m3/hr 0.02 m3/hr 0.02 kg/hr 0.01 kg/hr

Griddle

(each 300mm section)

Open Burner

(each)

Griddle

(each 300mm section)

26 mbar

* - Measure burner operating pressure at manifold test point with two burners operating at full

setting. Operating pressure is ex-factory set, through appliance regulator and is not to be
adjusted, apart from when converting between gases, if required. (Refer to ‘Gas Conversion’
section for details).

4

- All Other Markets

Specifications

Input Rate (N.H.G.C.)

- each Open Burner

- each 300mm Griddle Section 21 MJ/hr 21 MJ/hr

Supply Pressure
Burner Operating Pressure (*)
Gas Connection

Natural Gas Town Gas (**)

28 MJ/hr

1.13 - 3.40 kPa 0.75 - 1.50 kPa

0.95 kPa 0.63 kPa
See ‘Gas Connection’ information overleaf.

Input Rate (N.H.G.C.)

- each Open Burner

- each 300mm Griddle Section 21 MJ/hr 21 MJ/hr

Supply Pressure
Burner Operating Pressure (*)
Gas Connection

Natural Gas LP Gas

28 MJ/hr

1.13 - 3.40 kPa 2.75 - 4.50 kPa

0.95 kPa 2.6 kPa
See ‘Gas Connection’ information overleaf.

NOTE:

 (*) Measure Burner operating pressure at manifold test point with two burners operating at

'High Flame' setting.

 NAT, LPG & Butane Only - Operating pressure is ex-factory set and is not to be adjusted,

unless when converting between gases, if required.

 (**) TOWN GAS Only - Adjust burner operating pressure using adjustable gas regulator

supplied.

 Refer to ‘Gas Conversion and Specifications' section in this manual for further details.

Gas Connection

28 MJ/hr

28 MJ/hr

Gas supply connection point is located at rear of appliance:-
For GE505 / GE54, located approximately 130mm from right hand side, 36mm from rear and

655mm from floor and is reached from beneath appliance.
For GE506 / GE56, located approximately 130mm from right hand side, 32mm from rear and

655mm from floor and is reached from beneath appliance.
For GE508 / GE58, located approximately 130mm from right hand side, 35mm from rear and

655mm from floor and is reached from beneath appliance.

Connection is ¾" BSP male thread (for all other models).

5

Specifications

Electrical Supply Requirements

MODEL

GE505

GE54

GE506

GE56

GE508

GE58

1-Phase Connection

1P+N+E

230-240V

5.5 kW,

22.6 Amps @ 235 V

5.8 kW,

23.9 Amps @ 235 V

6.5 kW,

26.6 Amps @ 235 V

6.8 kW,

27.9 Amps @ 235 V

6.5 kW,

26.6 Amps @ 235 V

6.8 kW,

27.9 Amps @ 235 V

3-Phase Connection

3P+N+E

400-415V

5.5 kW

5.8 kW

6.5 kW

6.8 kW

6.5 kW

6.8 kW

L1 - 7.2 Amps
L2 - 7.7 Amps
L3 - 7.7 Amps

L1 - 8.5 Amps
L2 - 7.7 Amps
L3 - 7.7 Amps

L1 - 8.2 Amps
L2 - 9.2 Amps
L3 - 9.2 Amps

L1 - 9.5 Amps
L2 - 9.2 Amps
L3 - 9.2 Amps

L1 - 8.2 Amps
L2 - 9.2 Amps
L3 - 9.2 Amps

L1 - 9.5 Amps
L2 - 9.2 Amps
L3 - 9.2 Amps

Electrical Connection

Warning

THIS APPLIANCE MUST BE EARTHED. IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY A SUITABLY

QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.

GE505 / 54 - GE506 / 56 Models Only.

Electrical supply connection point is located at rear of appliance, approximately 74mm from right
hand side, 501mm from rear and 150mm from floor.

GE508 / 58 Models Only.

Electrical supply connection point is located at rear of appliance, approximately 374mm from right
hand side, 501mm from rear and 150mm from floor.

When connecting this electric appliance to mains supply, ensure that the followi ng is carried out:-

 An isolating switch is fitted within 2m of appliance, but not on appliance and in such a position

that user does not have to reach across cooking surface.

 Supply cord shall be oil-resistant, sheathed flexible cable and not lighter than ordinary

polychloroprene or other equivalent synthetic elastomer sheathed cord (as per AS/NZS 3191 part

2.10.11. or IEC 60245-IEC-57) e.g. HO5 RN-F Type.

 Branch supply line shall be individually overload protected to correct current rating and supply

chord shall be protected against any mechanical or thermal damage.

 A grommet is fitted around wiring entry hole into appliance.
 All wiring connections must be tight.

Refer to appropriate wiring standards for size of cable to be supplied to an appliance for current
drawn on that line.

6

Dimensions
GE505 / GE54

Dimensions

Dimensions
GE506 / GE56

7

Refer to Page 8 for Cook Top Options

Dimensions

Dimensions
GE508 / GE58

8

Refer to Page 8 for Cook Top Options

Cook Top Options

Dimensions

Cook Top Options GE505-D/GE54-D

Cook Top Options GE506-D/GE56-D

Cook Top Options GE505-C/GE54-C

Cook Top Options GE506-C/GE56-C

Cook Top Options GE506-B/GE56-B

Cook Top Options GE508-D/GE58-D

Cook Top Options GE506-A/GE56-A

Cook Top Options GE508-C/GE58-C

Cook Top Options GE508-B/GE58-B

Cook Top Options GE508-A/GE58-A

9