Bakbar G57-B User Manual
Technical data sheet for
GAS TARGET TOP 900mm
G57-B, G57-CB, G57-LS, G57-RB
Heavy-duty cast iron top with removable
centre ring
Matched modular height machined top for
seamless work surface
High output dual ring cast iron burner
3 models of base unit
1 model of ventilated 2 drawer
refrigeration base
Rear rollers
Stainless steel exterior
Easy clean
Easy service
Fully modular
Overall Construction
Target top
• 3 piece heavy-dut y cast iron top with fully machined sur face
• Top plates and removable centre with integral spill
protection design
• Cast top reinforced with integral heat ns for heat zone denition
• 45MJ dual ring cast iron burner with single control
• Full pilot and ame failure protection
• 50mm thick refractory brick lined burner box for high heat retention
• Welded hob surround with 1.5mm 304 stainless steel bull nose
• Side panels 1.2mm 304 stainless steel
• Splashback 1.2mm 304 stainless steel
• Vitreous enamelled control panel
• 2 stainless steel spill trays
• Supplied with heav y-duty centre casting removal tool
Bench mount (supplied as –B model)
• Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs
with adjustable feet.
• Adjustable height 80mm – 105mm
Cabinet base (supplied as – CB model)
• Fully modular for match suite nish
• Double skin 0.9mm 304 stainless steel interior and exterior
• Optional GN 1/1 4 position racking kit (1 or 2 cabinet bays)
• Up to eight 65mm GN 1/1 capacity
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two
adjustable feet at front and two rollers at rear
Leg stand (supplied as –LS model)
• Fully modular for matched suite nish
• Framed top for connection to Target Top
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two
adjustable feet at front and two rollers at rear
• Fully modular framed stand shelf with 0.9mm 304 stainless
steel nish
• Suitable for rear or through shelf gas connection to Target Top
• Quick assembly design
G57-LS
Refrigerated base (supplied as –RB model)
• Self contained suite matched modular base
• Ventilated system with R134a refrigerant
• -2° to + 8°C temperature (Tropical Climate rated)
• Two GN 1/1 drawers
• 100mm deep pan capacity
• Heav y-duty European telescopic drawer guides
• Magnetic drawer gaskets (replaceable without tools)
• 50mm fully foamed CFC free insulation
• 304 stainless steel exterior and interior
• Anti-corrosion treated evapor ator
• No condensate drain required
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet
• Condensing unit removable through front of unit for service
• Easy clean interior
Controls
Target top
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob
• Variable high to low burner control
• Single control knob for burner and pilot system
• Flame failure pilot burner
• Manual pilot ignition for reliable operation
Refrigerated base
• Digital control electronic thermostat
• Automatic defrost
• Automatic evaporation of defrost water
• -2 to +8°C temperature r ange
Cleaning and Servicing
• All models with easy clean stainless steel external nish
• Target Top fully serviceable from front of unit
• Refrigerated Base condenser removable through front of unit
Technical data sheet for
GAS TARGET TOP 900mm
Specifications
Target top
Burner
Dual ring cast iron burner
Gas power
45MJ/hr, 12.5kW
Top plate
Cooking surface 900mm x 625mm, 5625cm2
Centre 280mm diameter
Gas connection
3
/4 (BSP) male
R
All units supplied with Natural and LP gas
regulator
Refrigerated base
Type
Ventilated system
Refrigerant
R134a (160grams)
Climate classification
T – tropical
Electrical connection
220-240Vac, 50Hz, 1.8A , 1P+N+E
3 pin 10A plug cordset tted
Dimensions
Bench models
Width 900mm
Depth 812mm
Height 315mm
Incl. splashback 485mm
All models (excluding Bench model)
Width 900mm
Depth 812mm
Height 915mm
Incl. splashback 1085mm
Nett weight
Bench and Leg Stand models
178kg
Cabinet Base and Refrigerated Base models
222kg
Packing data
Bench and Leg Stand models
0.55m3, 223kg
Width 945mm
Depth 870mm
Height 665mm
Cabinet Base and Refrigerated Base models
1.03m3, 287kg
Width 945mm
Depth 870mm
Height 1255mm
Gas types
Available in Natural gas and LP gas, please specify
when ordering
Units supplied complete with gas type
conversion kits
Other gas types on request
Options
Adjustable feet at rear
Joining caps
Castors
G57-B
G57-LS
G57-CB
G57-RB
Cert 6872
Moffat / 7.09 / 1140
Loading...