Bakbar G516B-B User Manual

Technical data sheet for
GAS COOKTOPS 900mm
G516D-B, G516D-CB, G516D-LS, G516D-RB, G516C-B, G516C-CB, G516C-LS, G516C-RB, G516B-B, G516B-CB, G516B-LS, G516B-RB, G516A-B, G516A-CB, G516A-LS, G516A-RB
Heavy-duty construction 28 MJ/hr open burners Flame failure standard Pilot burners optional 300mm, 600mm, and 900mm griddle plate options Optional simmer plates 3 models of base unit 1 model of ventilated 2 drawer
refrigeration base
Rear rollers Stainless steel exterior Easy clean Easy service Fully modular
G516D-LS
Overall Construction
Cooktop
• Welded hob with 1.5mm 304 stainless steel bull nose
• Side panels 1.2mm 304 stainless steel
• Splashback 1.2mm 304 stainless steel
• Vitreous enamelled control panel
• Aluminised steel internal construction
• Cast iron 28MJ/hr open burners with forged brass cap
• Vitreous enamelled cast iron potstands
• Vitreous enamelled open burner spill covers
• Cast iron simmer plates (optional extra)
• 12mm thick mild steel griddle plate
• 2.5mm 304 stainless steel griddle splash guards
• Stainless steel spill trays Griddle sections are standard on RH side. Available on LH side and
centre to order or by conversion.
Bench mount (supplied as –B model)
• Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs with adjustable feet
• Adjustable height 80mm – 105mm
Cabinet base (supplied as –CB model)
• Fully modular for match suite nish
• Double skin 0.9mm 304 stainless steel interior and exterior
• Optional GN 1/1 4 position racking kit
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two adjustable feet at front and two rollers at rear
Leg stand (supplied as –LS model)
• Fully modular for matched suite nish
• Framed top for connection to Cooktop
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two adjustable feet at front and two rollers at rear
• Fully modular framed stand shelf with 0.9mm 304 stainless steel nish
• Suitable for rear or through shelf gas connection to Cooktop
• Quick assembly design
Refrigerated base (supplied as –RB model)
• Self contained suite matched modular base
• Ventilated system with R134a refrigerant
• -2° to + 8°C temperature (Tropical Climate rated)
• Two GN 1/1 drawers
• 100mm deep pan capacity
• Heav y-duty European telescopic drawer guides
• Magnetic drawer gaskets (replaceable without tools)
• 50mm fully foamed CFC free insulation
• 304 stainless steel exterior and interior
• Anti-corrosion treated evapor ator
• No condensate drain required
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with adjustable feet
• Condensing unit removable through front of unit for service
• Easy clean interior
Controls
Cooktop
• Variable high to low controls to open burners
• Open burners ame failure standard with pilot burners optional
• Variable high to low controls to griddles
• Griddles standard with pilot, ame failure and piezo ignition
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob
Refrigerated base
• Digital control electronic thermostat
• Automatic defrost
• Automatic evaporation of defrost water
• -2° to +8°C temperature range
Cleaning and Servicing
• All models with easy clean stainless steel external nish
• Lift off burner heads and vitreous enamelled burner spill covers
• Stainless steel spill trays under open burner and griddle sections
• Access to all parts from front of unit
• Refrigerated Base condenser removable through front of unit
Technical data sheet for
GAS COOKTOPS 900mm
Specifications
Burners
Open Burners 28MJ/hr dual ame ring with simmer r ate Griddle Burners 20MJ/hr per 300mm section
Gas power
G516D 168 MJ/hr, 46.6kW G516C 132 MJ/hr, 36.6kW G516B 96 MJ/hr, 26.6kW G516A 60 MJ/hr, 16.6kW
Griddle Plate
300mm Griddle cooking sur face 292mm x 475mm, 1387cm2 600mm Griddle cooking sur face 592mm x 475mm, 2812cm2 900mm Griddle cooking sur face 892mm x 475mm, 4237cm2
Gas connection
3
R
/4 (BSP) male All units supplied with Natural and LP gas regulator
Refrigerated base
Type
Ventilated system
Refrigerant
R134a (160grams)
Climate classification
T – tropical
Electrical connection
220-240Vac, 50Hz, 1.8A , 1P+N+E 3 pin 10A plug cordset tted
Dimensions
Bench models
Width 900mm Depth 812mm Height 315mm Incl. splashback 485mm
All models (excluding Bench model)
Width 900mm Depth 812mm Height 915mm Incl. splashback 1085mm
Nett weight
Bench and Leg Stand models
129kg
Cabinet Base and Refrigerated Base models
180kg
Packing data
Bench and Leg Stand models
0.55m3, 174kg Width 945mm Depth 870mm Height 665mm
Cabinet Base and Refrigerated Base models
1.03m3, 245kg Width 945mm Depth 870mm Height 1255mm
Gas types
Available in Natural gas and LP gas, please specify when ordering Units supplied complete with gas type conversion kits Other gas types on request
Options
Adjustable feet at rear Simmer plates (replaces Potstand) Ribbed griddle plates Joining caps Castors
G516-B
G516-LS
G516-CB
G516-RB
G516D
G516B
G516C
G516A
Cert 6902
Moffat / 7.09 / 1140
Loading...