Bakbar G20CSD User Manual

TECHNICA L SPECIFICATION SHE E T FOR

Blue Seal Gas Combi Steamer

S LINE G20CSD, G20CSDW 20 x 1/1 GN or 10 x 2/1 GN

• Manual controls

• Easy to read displays

• Core temperature probe

• Two speed fan

• 92 preset recipe programs

• 99 free programs with 4 cycles,

automatic sequence

• Electronic thermostat 30° - 300°C

• Auto-reversing fan rotation

• Autoclima with automatic vent

• Oven light

• Hand shower

• Semi automatic washing programme

GENERAL FEATURES:

- Direct steam injection system

- High efficiency heat exchanger and gas burner
system

- Stainless steel construction

- Hygienic rounded corners in oven cavity

- Pivoting fan suction panel

- Front removable control panel for easy
servicing

- Hygienic plug-in door seal for easy to remove
day-to-day cleaning

- Adjustable door hinges

- Self draining door condensate drip tray

- Oven light

- Oven door handle mechanism allows either left
or right operation

- Cool to touch double glazed door

• Fully automatic wash system

(W version only)

• 4 LED’s to indicate actual cooking cycle

in programme mode

• Rack runners for GN loading

- Hinged inner glass for easy cleaning

- Constant self-diagnosis for error recognition

OPTIONAL FEATURES:

- Right hinged door

- Marine and special voltages

- Side runners for 600 x 400 trays (8 trays)

- Connection for an external printer (type RS232)

TECHNICA L SPECIFICATION SHE E T FOR

Blue Seal Gas Combi Steamer

S LINE G20CSD, G20CSDW 20 x 1/1 GN or 10 x 2/1 GN

Dimensions

Width 1170mm

Depth 895mm
Height 1090mm
Weight 270kg

Packed Dimensions

Width 1320mm
Depth 1040mm
Height 1220mm
Weight 295kg

Shelves

1/1 GN 20
2/1 GN 10

Shelf Spacings 70mm

Installation requirements

(for precise installation
instructions, please refer to
the unit’s installation
manual).

Power connection
requirements

Supply line voltage;

230-240V ~ 50Hz, 1P+N+E
Gas connection for Natural

or LPG R1/2.

Gas Connection

Nominal Gas Consumption

(MJ/hr) 100

Electrical Connection

(kW) 1.0

Rated Current (A) (230V) 4.3
3 pin plug (10A) cordset

fitted

Exhaust connection to
ventilation system with
safety switch.

Observe regulations for gas
suppliers.

IPX5 spray-proof and hose
proof.

Installation clearances

- rear 25mm

- right 500mm*

- left 50mm
*Clearance required on

fixed installations for
service accessibility.

If heat sources are located
near the RH side of the AC
combi, ensure that a
minimum distance of
400mm is maintained.

Install in accordance with
local body regulations only
on horizontal surfaces and
not against combustible
walls.

Water connection
requirements

- cold water

- flow pressure
(200-500kPa)

- soft water connection*

- shut-off valve with return
f

low inhibitor and dirt filter

- water supply R3/4

- R50 waste water
connection

(*Water softener may be
required. Please refer to
installation manual for
water treatment values.)

Australia

www.moffat.com.au

New Zealand

www.moffat.co.nz

Australia
Moffat Pty Limited

Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170

Ph 03-9518 3888

Fax [phone]
[e-mail]
www.moffat.com.au

New South Wales
Ph 02-8833 4111
[e-mail]

South Australia

Ph 03-9518 3888

[e-mail]

Queensland
Ph 07-3630 8600
[e-mail]

Western Australia

Ph 08-9202 6820

[e-mail]

New Zealand
Moffat Limited

Christchurch
16 Osborne Street
Christchurch 8011

Ph [phone]

Fax [phone]
[e-mail]

Auckland
Ph [phone]

[e-mail]

A = WATER CONNECTION R3/

(SOFTENED WATER) refer to
installation manual for water
treatment values.
B = WATER CONNECTION R
C = DRAIN CONNECTION Ø60
D = ELECTRICAL CONNECTION ENTRY
E = HIGH/LOW PRESSURE RELIEF VENT
F = OVEN VENT Ø80
G = GAS SUPPLY ENTRY R
H = GAS FLUE OUTLET Ø80

4

3

4

/

1

2

/

In line with policy to continually
develop and improve its products,
Moffat Limited reserves the right to
change specifications and design
without notice.

© Copyright Moffat Ltd
Moffat 04.11/1176