Bakbar E21ACPD User Manual

TECHNICAL SPECIFICATION SHEET FOR

Blue Seal Electric Combi Steamer

AC SERIES E21AC PD 20 x 1/1GN

Electronic manual control panel with

cooking modes

Programmable with 91 program cycles
Electronic thermostat 30°C - 300°C
Electronic timer
Auto-reversing fan rotation
Cavity fast cool down which automatically

stops at 50°C
Automatic cavity cool down between high

temperature cycles and the next cycle

featuring a lower temperature
Autoclima automatic humidity control

system
Automatic vent to evacuate the excess

humidity

GENERAL FEATURES:

- Direct steam injection system

- Stainless steel construction

- Hygienic rounded corners in oven cavity

- Pivoting fan suction panel

- Front removable control panel for easy servicing

- Hygienic plug-in door seal for easy to remove
day-to-day cleaning

- Adjustable door hinges

- Self draining door condensate drip tray

- Hand shower

- Oven lights

- Oven door handle with progressive brake
mechanism

- Cool to touch double glazed door

- Hinged inner glass for easy cleaning

Automatic quenching of vapours into the

oven drain
Cavity clean program
Energy saving device for reduced energy

consumption

- Constant self-diagnosis for error recognition

- Includes trolley with front brake castors

OPTIONAL FEATURES:

- Interchangeable core probes with external socket

- Marine and special voltages

- Connection for an external printer (type RS232)

- Connection for energy saving system

TECHNICAL SPECIFICATION SHEET FOR

Blue Seal Electric Combi Steamer

AC SERIES E21AC PD 20 x 1/1GN

Dimensions

Width 950mm
Depth 825mm
Height 1950mm
Weight 310kg

Packed Dimensions

Width 1130mm
Depth 1050mm
Height 2220mm
Weight 400kg

Shelves

1/1 GN 20
Shelf Spacings 67mm

Installation requirements

(for precise installation
instructions, please refer to
the unit’s installation manual).

Power connection
requirements

Multi pole circuit breaker and
all pole disconnection isolator
switch installed near the
appliance.

Supply line voltage;
400-415V ~ 50Hz, 3P+N+E

Special voltage options
available on request.

Power Connection

Total (kW) 31.8
Convection power (kW) 30
Rated Current (A) (400V) 45

IPX5 spray-proof and hose
proof.

Installation clearances

- rear 25mm

- right 500mm*

- left 50mm

*Clearance required on fixed
installations for service
accessibility.

If heat sources are located
near the RH side of the AC
combi, ensure that a
minimum distance of 400mm
is maintained.

Install in accordance with
local body regulations only on
horizontal surfaces and not
against combustible walls.

Water connection
requirements

- cold water

- flow pressure (2 to 6 bar)

- soft water connection*

- shut-off valve with return
flow inhibitor and dirt filter

- water supply R3/4

- R50 waste water connection

(*Water softener may be
required. Please refer to
installation manual for water
treatment values.)

A = WATER CONNECTION R3/4

(SOFTENED WATER) refer to installation

manual for water treatment values.
B = WATER CONNECTION R
C = DRAIN CONNECTION Ø50
D = ELECTRICAL CONNECTION ENTRY
E = HIGH/LOW PRESSURE RELIEF VENT
F = OVEN VENT Ø80

3

/4

Australia

www.moffat.com.au

New Zealand

www.moffat.co.nz

Australia
Moffat Pty Limited

Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170
Ph 03-9518 3888
Fax [phone]
[e-mail]
www.moffat.com.au

New South Wales
Ph 02-8833 4111
[e-mail]

South Australia
Ph 03-9518 3888
[e-mail]

Queensland
Ph 07-3630 8600
[e-mail]

Western Australia
Ph 08-9202 6820
[e-mail]

New Zealand
Moffat Limited

Christchurch
16 Osborne Street
Christchurch 8011
Ph [phone]
Fax [phone]
[e-mail]

Auckland
Ph [phone]
[e-mail]

Optional Extras

SC Core temperature probe

GKST21 Extra roll-in trolley to suit 21AC PD

GKPT21 Plate banqueting trolley to suit 21AC PD / 60 plates 310mm

CPT21 Thermal cover for plate banqueting system to suit 21AC PD

In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change
specifications and design without notice.

© Copyright Moffat Ltd
Moffat 6.08/1102