Bakbar E20ACPD User Manual

TECHNICAL SPECIFICATION SHEET FOR

Blue Seal Electric Combi Steamer

AC SERIES E20AC PD 20 x 1/1GN or 10 x 2/1

Electronic manual control panel with

cooking modes

Programmable with 91 program cycles
Electronic thermostat 30°C - 300°C
Electronic timer
Auto-reversing fan rotation
Cavity fast cool down which automatically

stops at 50°C
Automatic cavity cool down between high

temperature cycles and the next cycle

featuring a lower temperature
Autoclima automatic humidity control

system
Automatic vent to evacuate the excess

humidity

GENERAL FEATURES:

- Direct steam injection system

- Stainless steel construction

- Hygienic rounded corners in oven cavity

- Pivoting fan suction panel

- Front removable control panel for easy servicing

- Hygienic plug-in door seal for easy to remove
day-to-day cleaning

- Adjustable door hinges

- Self draining door condensate drip tray

- Hand shower

- Oven lights

- Oven door handle mechanism allows either left
or right operation

- Cool to touch double glazed door

- Hinged inner glass for easy cleaning

- Constant self-diagnosis for error recognition

Automatic quenching of vapours into the

oven drain
Cavity clean program
Energy saving device for reduced energy

consumption

OPTIONAL FEATURES:

- Interchangeable core probes with external socket

- Right hinged door

- Two steps safety door handle mechanism

- Marine and special voltages

- Side runners for 600 x 400 trays (8 trays)

- Connection for an external printer (type RS232)

- Connection for energy saving system

TECHNICAL SPECIFICATION SHEET FOR

Blue Seal Electric Combi Steamer

AC SERIES E20AC PD 20 x 1/1GN or 10 x 2/1

Dimensions

Width 1170mm
Depth 895mm
Height 1090mm
Weight 230kg

Packed Dimensions

Width 1320mm
Depth 1040mm
Height 1220mm
Weight 255kg

Shelves

1/1 GN 20
2/1 GN 10
Shelf Spacings 70mm

Installation requirements

(for precise installation
instructions, please refer to
the unit’s installation manual).

Power connection
requirements

Multi pole circuit breaker and
all pole disconnection isolator
switch installed near the
appliance.

Supply line voltage;
400-415V ~ 50Hz, 3P+N+E

Special voltage options
available on request.

Power Connection

Total (kW) 31
Convection power (kW) 31
Rated Current (A) (400V) 45

IPX5 spray-proof and hose
proof.

Installation clearances

- rear 25mm

- right 500mm*

- left 50mm

*Clearance required on fixed
installations for service
accessibility.

If heat sources are located
near the RH side of the AC
combi, ensure that a
minimum distance of 400mm
is maintained.

Install in accordance with
local body regulations only on
horizontal surfaces and not
against combustible walls.

Water connection
requirements

- cold water

- flow pressure (2 to 6 bar)

- soft water connection*

- shut-off valve with return
flow inhibitor and dirt filter

- water supply R3/4

- R50 waste water connection

(*Water softener may be
required. Please refer to
installation manual for water
treatment values.)

A = WATER CONNECTION R3/4

(SOFTENED WATER) refer to installation

manual for water treatment values.
B = WATER CONNECTION R
C = DRAIN CONNECTION Ø60
D = ELECTRICAL CONNECTION ENTRY
E = HIGH/LOW PRESSURE RELIEF VENT
F = OVEN VENT Ø80

3

/4

Australia

www.moffat.com.au

New Zealand

www.moffat.co.nz

Australia
Moffat Pty Limited

Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170
Ph 03-9518 3888
Fax [phone]
[e-mail]
www.moffat.com.au

New South Wales
Ph 02-8833 4111
[e-mail]

South Australia
Ph 03-9518 3888
[e-mail]

Queensland
Ph 07-3630 8600
[e-mail]

Western Australia
Ph 08-9202 6820
[e-mail]

New Zealand
Moffat Limited

Christchurch
16 Osborne Street
Christchurch 8011
Ph [phone]
Fax [phone]
[e-mail]

Auckland
Ph [phone]
[e-mail]

Optional Extras

SC Core temperature probe

SPT20 Stainless steel stand with 12 x 1/1 GN or 6 x 2/1 GN shelves to suit 20AC PD

SS102 Removable rack complete with fitting frame alternative to side runners to suit 20AC PD

TLT102 Removable frame for oven and plate racks to suit 20AC PD

SG102 Removable oven rack to suit 20AC PD

PRT20 Plate banquet rack to suit 20AC PD / 60 plates

CRT20 Trolley for removable oven rack with drip tray to suit 20AC PD

CPT20 Thermal cover for plate banqueting system to suit 20AC PD

KP004 Set of four legs for bench mounting

In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change
specifications and design without notice.

© Copyright Moffat Ltd
Moffat 6.08/1102