Badger Meter M2000, M5000 Specifications

M-Series®

M2000 and M5000 Field Verication Device

DESCRIPTION

The Field Verification Device is a portable test device for the Badger Meter M-Series® electromagnetic flow meters. The M2000 and the M5000 meters can be tested using this device.

With the Field Verification Device, accurate verification of meter functionality is assured without taking the meter out of the pipeline and interrupting the process. The complete verification test takes approximately 20 minutes and results can be downloaded to a Microsoft® Windows® 8, 7, Vista®or XP personal computer.

FEATURES

• Determines if the meter amplifier is within one percent of the original factory calibration.

• Verifies the functionality of all the meter’s inputs and outputs.

• Measures electrode resistance and integrity.

• Measures coil resistance and integrity.

• Measures coil insulation resistance.

• Measures current and frequency output.

• Evaluates the signal processing functionality.

• Provides pass/fail results to aid in troubleshooting.

ACCESSORIES

• Test cable for M2000 and M5000 connection

• AC charger with EU/US connection adaptors

• Automobile utility DC power supply connector

• PC to Field Verification Device communication cables

• Rugged case for transport

ACCURACY

Input Gain: +/– 0.1%

Amplifier

Detector

Excitation Coil Current: 20…400mA +/– 0.1% Excitation Coil Frequency: 50/60Hz) +/– 1% Analog Outputs Current: 4…20 mA +/– 0.1% Digital Outputs: 1Hz/20 kHz – 0.1%

Coil Resistance: 40…120Ohm +/–1 % Electrode Resistance (against ground: 100kOhm…10MOhm) +/–10% Coil Insulation (against ground: 100kOhm…10MOhm) +/–10%

SPECIFICATIONS

Dimensions 8.3 × 4 × 1.5 inches (210 × 102 × 39 millimeters)

Weight 15.9 ounces (450 grams)

One female D-25 Cannon connector for the meter harness

Connectors

Display

Keypad

Battery

Protection

Class

communications port One USB 2.0 computer connection or 12V DC charging One 5V AC, 3.0A power connection for battery recharging

Backlit LCD Resolution = 240 × 128 pixel, visible area 38 × 72 mm

Nine navigation-function buttons Twelve alpha-numeric serial number buttons One On/Off button One battery status indicator

Rechargeable internal Li-pol accumulator with a charging time of four hours (USB or AC-wall) or two hours (automobile utility adapter)

IP46

MAG-DS-01280-EN-02 (February 2015)

Product Data Sheet

M-Series®, M2000 and M5000 Field Verication Device

Control. Manage. Optimize.

M-SERIES is a registered trademark of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specications without notice, except to the extent an outstanding contractual obligation exists. © 2015 Badger Meter, Inc. All rights reserved.

www.badgermeter.com