Badger Meter ER-6/R Data sheet

Industrial Registers

Model ER-6/R (Remote) Digital Resettable Totalizer

DESCRIPTION

The Badger Meter® Model ER-6 register is a remote totalizer designed for use with all Badger Meter meter product lines. A rear adapter plate is provided for attachment to a wall or other suitable surface.

The ER-6 is only offered in the remote style as it requires a scaled pulse input from the meter. The unit is battery powered.

The totalizing function uses an easy-to-read, 8-digit numeric LCD display. The display can be reset to zero from the front panel button or from an external switch wired directly to a rear terminal. The front panel Reset button can be inhibited.

You can backlight the display by connecting a DC power source to the unit.

When the battery is low, an indicator appears on the screen a couple weeks before the end of the battery life to remind the operator that the battery is in need of replacement.

OPERATION

The ER-6 simply totalizes all pulses received. If a scaled pulse is not available, consider using the Model ER-9 or ER-10 units, which have a scaling feature.

FEATURES

• All solid-state components for long life

• Battery powered with memory retention

• Low battery indicator

• Corrosion-resistant plastic housing built to NEMA 4X specifications

• Backlit display available

• Front panel totalizer Reset switch can be disabled

REG-DS-02415-EN-04 (May 2017)

Product Data Sheet

Industrial Registers, Model ER-6/R (Remote) Digital Resettable Totalizer

SPECIFICATIONS

Count Input (Terminal 2)

Type NPN signal, contact closure

Count speed

NPN, 280 Hz maximum, Contact, 95 Hz maximum

Logic Low < 1.0V DC, High > 2.0V DC

Minimum pulse

NPN,1.78 μs, Contact, 5 ms

width

Maximum input 28V DC

Impedance 1 Meg to battery

Front Panel Reset Enable (Terminal 5)

Type NPN signal, contact closure; level sensitive

Maximum input 28V DC

Remote Reset Input (Terminal 4)

Type NPN Signal, Contact closure; edge sensitive

Frequency response 30 Hz (50% duty cycle)

Maximum input 28V DC

Operating Temperature

Indicator 32…140° F (0…60° C)

Power Source

Type Single 3V Lithium battery

Replacement part # 62576-001

Battery life

expectancy

Low power indicator

5 years

“Low Bat” flashes on display approx. 2 weeks prior to end of battery life

Display

Supertwist LCD for use with or

Type

without backlighting

Number 8 digits

Height 12 mm (0.472 in.)

Green Illumination over whole viewable

Backlighting

area with a 10…28V DC supply (Terminal 8)

Physical

Dimensions

36 mm x 72 mm, 38 mm deep (1.417 in. x 2.835 in., 1.496 in. deep)

Panel mount (mounting bracket supplied)

Mounting

33 mm x 68 mm (+ 0.3 mm) panel cutout

1.299 in. x 2.677 in., (+ 0.012 in.) panel cutout

Connections Up to 8 screw terminals

Weight Approximately 13 ounces

Control. Manage. Optimize.

Trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specications without notice, except to the extent an outstanding contractual obligation exists. © 2017 Badger Meter, Inc. All rights reserved.

www.badgermeter.com

Badger Meter ER-6/R Data sheet

Specifications and Main Features

Frequently Asked Questions

User Manual