Baby Trend TJ30 Instruction Manual

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

Lea todas las instrucciones ANTES de armar y USAR el producto.

CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.

Lisez toutes les instructions du manuel AVANT l’assemblage

ou L’UTILISATION de ce produit. CONSERVEZ CES

INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

www.babytrend.com

TJ30XXXA_3L_090716

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND

FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within the rst 180 days of purchase. Any product which has been subjected to misuse, abuse, abnormal use,

excessive wear and tear, improper assembly, negligence, environmental exposure, alteration

or accident, or has had its serial number altered or removed invalidates all claims against

the manufacturer. Any damage to property during installation is the sole responsibility of the

end user. The Customer Service Department can be contacted at 1 (800) 328-7363 Monday

through Friday between 8:00am and 4:30pm (PST). Return Authorizations are required prior

to returning product(s) to Baby Trend®. Warranty only valid in North America.

GARANTIA

NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND

PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.

La garantía de Baby Trend® cubre defectos de fábrica dentro de los primeros 180 días de

la compra.Cualquier producto que haya sido sometido a uso indebido, abuso, uso anormal,

desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o

accidente, o que ha tenido su número de serie alterado o removido anula todos los reclamos

contra el fabricante. Cualquier daño a la propiedad durante la instalación es de la exclusiva

responsabilidad del usuario nal. El Departamento de Servicio al Cliente puede ser

contactado a 1 (800) 328-7363 Lunes a viernes entre 8:00am y 4:30pm (PST).Un numero

de autorizacion es requerido antes de la devolución de los producto(s) a Baby Trend®.

Garantia válida sólo en América del Norte.

GARANTIE

NE PAS RETOURNER VOTRE PRODUIT AU MAGASIN. VEUILLEZ CONTACTER BABY

TREND POUR DES PIÈCES DE RECHANGE, ENTRETIEN ET RÉPARATION.

La garantie Baby Trend® couvre les vices de fabrication dans les 180 jours suivant l'achat du

produit. Tout produit qui a été soumis à un usage abusif, une utilisation anormale, une usure

excessive, un montage incorrect, de la négligence, de l'exposition environnementale, de la

modication ou un accident, ou a eu son numéro de série modié ou supprimé annule toutes

les réclamations contre le fabricant. Tout dommage à la propriété lors de l'installation est de

la seule responsabilité de l'utilisateur nal. Le service client peut être contacté au 1 (800)

328-7363 du lundi au vendredi 8 h – 16 h 30 (PST). Une autorisation sera nécessaire avant

de retourner le produit à Baby Trend®. Garantie valable uniquement en Amérique du Nord.

1-800-328-7363 (8:00am ~ 4:30pm PST) www.babytrend.com

Baby Trend, Inc. 1607 S. Campus Ave., Ontario, CA 91761

www.babytrend.com

TJ30

Instruction Manual

Manual de Instrucciones

Manuel d’instruction

2

PARTS

2

Table of Contents Índice Table des Matières

1

English 2

Parts 2

Warning 3 Assembly 5 Safety 9 Infant Car Seat 13

Fold / Unfold 14

Maintenance 15

Espanol 17

Piezas 17

Advertencia 18

Ensamblar 20

Seguridad 25

Sillita para el automóvil 28

Plegar / desplegar 29

Mantenimiento 30

Français 32

Pièces 32

Avertissement 33 Assemblage 35 Sécurité 39

Siége d’auto 44

Plier / Déplier 46

Entretien 47

Rear Wheels**Front Wheel**

Stroller

Bumper BarAxel Nuts

Retainer Plate

CHECK THAT YOU HAVE ALL THE PARTS FOR THIS

MODEL BEFORE ASSEMBLY.

**

Wheel styles may vary.

Cup Holder

*

Please refer to the manual located under the car seat for base type and instructions.

Infant Car Seat* Base*

3

WARNING

4

WARNING

343

WARNING: Please follow all of these

instructions to ensure the safety of your child. Keep these instructions for future reference.

WARNING: Failure to follow these instructions

could result in serious injury or death. Avoid serious injury from falling or sliding out. Always use the safety harness and ensure that the child is properly positioned according to these instructions.

WARNING: Never leave children unattended. WARNING: Wheel can detach and cause tip

over. Pull on the wheel to assure it is securely attached.

WARNING:Care must be taken when folding

and unfolding the stroller to prevent nger entrapment.

• CAUTION: This single stroller is designed for one child only. Use with

more than one child may cause the unbalance condition which can injure/ harm your child.

• Purses, shopping bags, parcels, diaper bags or accessory items may

change the balance of the stroller and cause hazardous unstable

conditions.

• Always lock the front swivel wheel in STRAIGHT position before placing

or removing your child from the stroller and when walking fast or jogging.

• The maximum weight that can be carried in the basket is 5 lbs (2.26 kg), child tray and parent tray are 3 lbs (1.36 kg) each. Excessive weight may cause a hazardous unstable condition to exist.

• Be certain the stroller is fully erect and latched in the open position before allowing children near the stroller.

• Use of the stroller with children weighing more than 50 pounds (22.67 kg) or over 42 inches (106.7 cm) tall, will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition to exist.

• NEVER use the stroller on stairways or escalators.

• NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.

• We recommend that the child occupant be at least 6 months of age prior to use of the stroller for jogging. Because children develop at different rates, please discuss the use of a jogging stroller with your health care provider prior to jogging with your child.

• NEVER allow your stroller to be used as a toy.

• To clean use only mild household soap or detergent and warm water on a sponge or clean cloth.

• Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.

• Discontinue use of stroller should it malfunction or become damaged. Please contact our Customer Service Parts Hotline to arrange for repair or obtain replacement parts.

ASSEMBLY ASSEMBLY

5

6

5

6

Remove stroller from box. The front wheel and rear wheels MUST be installed prior to use.

FRONT WHEEL

To attach the front wheel, unfold stroller as described in the section following:

1) • Unlock the release lever (Fig. 1a) and

unfold stroller frame by pulling upward on the stroller handle until the frame

locks (Fig. 1b).

2) • Slide the front wheel onto the front fork

(Fig. 2).

IMPORTANT! To ensure safe operation of your stroller, please

follow these instructions carefully. Please keep these instructions for future reference.

IMPORTANT! Before assembly and each use, inspect this product for

damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.

IMPORTANT! Adult assembly is required.

Fig. 1b

Fig. 1a

Fig. 2

3) • Slide the retainer plate onto the front

wheel. Be sure that the raised lip is pointing toward the fork and insert it into the slot on the fork. The tab on the retainer plate must be lined up with the

slot before tightening the wheel (Fig. 3).

4) • With the wheel in position, tighten the

axel nuts and tighten with standard crescent, box, or open end wrench. You

should feel signicant resistance and

the wheel should be held tightly in place

(Fig. 4).

REAR WHEELS

5)

• Rest the stroller upside down, on the handle.

• Press the rear wheel posts into the rear

frame hub until it clicks into place (Fig. 5).

NOTE: Pull on the rear wheel to ensure that it is securely attached to the stroller.

TIRES

6) • Tires are shipped un-inated. The tires

should be inated on a regular basis to between 20 to 25 p.s.i. Always use a bicycle style hand air pump to inate the

tires *not included

Fig. 3

Retainer Plate

Axel Nut

Axel and Hub

Front Fork

Slot

Fig. 5

Fig. 4

ASSEMBLY ASSEMBLY

7

8

7

8

CUP HOLDER

WARNING: To avoid

burns, never put hot liquids in cup holder. Avoid possible tipping, do not place more than 1 lb. (0.45kg) in cup holder.

7) • To attach cup holder: slide the clip on

the cupholder over Cup Holder Tab on

the Handle Bar. Push until rmly in place (Fig. 7).

CANOPY

8)

• To open the canopy: push forward on

the front edge of the canopy while holding

the rear of canopy in place (Fig. 8).

• To fold the canopy: pull backwards on

the front edge (Fig. 8).

SEATBACK POSITIONING

9) •

To recline the seat: loosen the strap

through the buckle and adjust to the

required recline position (Fig. 9a). To

place the seat back in a more upright position, press upward on the seat back with one hand while pulling the strap

through the buckle with the other (Fig. 9b).

NOTE: The upright position should be used only for a child that is at least 6

months old. Always re-adjust the safety

harness, including the shoulder belts, when repositioning the seatback.

Fig. 7

Fig. 8

Fig. 9a

Fig. 9b

BUMPER BAR

WARNING: Do not

use bumper bar to carry seat with child inside. The bumper bar is not a carrying handle.

10) • Attach the bumper bar by lining up

anchors with the slots on the seat. Push

until it locks into place (Fig. 10a).

NOTE: The bumper bar must be securely attached before using this product.

• To detach bumper bar, press the release buttons on the bottom of the bar and pull

bar out of the anchor (Fig. 10b).

Fig. 10a

Fig. 10b

9

SAFETY

10

SAFETY

BRAKES

WARNING: Always

set brakes when the stroller is not being pushed so that the stroller will not roll away. NEVER leave stroller unattended on a hill or incline as the stroller may slide down the hill.

11) • To engage brakes, apply downward

pressure to the brake levers located on

the rear axle. The stroller may require

forward or rearward movement in order

to engage the brake (Fig. 11). Check that

the stroller will not move once the brakes are properly applied. To release, gently lift up on the brake levers.

FRONT WHEEL LOCK

WARNING: Always

lock the front swivel wheel in STRAIGHT position before placing or removing your children from the stroller and when walking fast or jogging.

FALL HAZARD:

Prevent tipping over, before running, jogging or walking fast, LOCK the front wheel from swiveling.

12) •

The front wheel is equipped with a swivel

locking device and can lock the wheel in

the front or back position (Fig. 12a).

Fig. 11

Fig. 12b

Fig. 12a

Lock

Unlock

• Push the button on the wheel upward to engage the locks and push downward to

disengage the locking device (Fig. 12b).

TO SECURE THE CHILD

WARNING: Avoid

serious injury from falling or sliding out. Always use the

safety harness.

STRANGULATION

HAZARD:

Child can

strangle in loose straps. Never leave child in seat when straps are loose or

undone.

TYPE 1 AND 2

13) • The shoulder straps of the 5-point

harness have 3 attachment positions. Select the position that places the shoulder strap level with, or below the

top of the child’s shoulder (Fig. 13a).

To adjust harness height unhook the shoulder strap from the crotch buckle. Feed the shoulder strap through the harness spread slots. You can access these slots from the rear of the seat underneath the fabric. Feed shoulder strap through appropriate slot and reattach shoulder strap to crotch buckle.

• Carefully place the child in the stroller seat and bring the safety harness around the child’s waist and over the shoulders. Place the crotch strap between the child’s legs. Insert the male end of each shoulder/waist belt into the buckle on the crotch strap. Tighten the harness to be snug around the child’s waist and over

the child’s shoulders (Fig. 13b).

Fig. 13b

Fig. 13a

Shoulder Strap

Squeeze

Waist Strap

Crotch Strap

Adjust for a snug t

TYPE 2 BUCKLE

Adjust for a snug t

TYPE 1 BUCKLE

11

SAFETY

12

SAFETY

TO RELEASE THE CHILD

TYPE 1

14) • To release, push Button on Center Clasp,

the two Harness Buckles will pop free

(Fig. 14).

TYPE 2

15) • To release, apply pressure to both sides

of each male clip until the clip is released

(Fig. 15).

Fig. 14

Center Clasp

TYPE 1

Fig. 15

TYPE 2

Fig. 16b

Fig. 16a

JOGGING WITH YOUR STROLLER

WARNING:

Never jog or run with your newborn in the car seat position. Use for strolling only.

STRANGULATION HAZARD!Children have

strangled when straps have wrapped around their neck. Remove strap when not in use and place in stroller storage pocket. Keep this stroller carrier strap out of children reach.

When you are jogging with your child, use the

following safety features:

16) • LOCK THE FRONT SWIVEL WHEEL IN

STRAIGHT POSITION (Step 12)

• SAFETY WRIST STRAP: Always

connect the safety strap to either wrist when jogging. This strap will keep the stroller from rolling away in the event that you trip while running (Fig.

16a). The safety strap must remain connected

to the rear lower frame cross member at all times. This location is intended to prevent the stroller being tipped backwards in the event that you do fall to the ground. The safety strap includes a hook and loop attachment for storage, on the left side of the stroller, when

not in use (Fig. 16b).

FOLD / UNFOLD

14

INFANT CAR SEAT

13

INFANT CAR SEAT ATTACHMENT

WARNING:

Never jog or run with your newborn in the car seat position. Use for strolling only.

WARNING: Avoid

serious injury from falling or sliding out, always use the Infant Car Seat harness.

17) •

Place the seat back in the most upright position, press upward on the seat back with one hand while pulling the strap through the

buckle with the other (Fig 17a).

• Turn car seat Support Tabs on the stroller frame (Fig 17b).

NOTE: Car Seat Support Tabs are Only used for the infant car seat.

• Position the infant car seat so that it faces toward the rear of the stroller and the car seat base hooks lock onto the bumper bar (Fig. 17c).

NOTE: Check that the bumber bar is rmly

attached to the car seat and stroller.

• Strap both short clips over the infant car

seat, through both seat belt slots (Fig. 17d).

NOTE: Make sure both short clips are tightly fastened to the infant car seat

before use.

TO REMOVE INFANT CAR SEAT

18) • To remove the Infant Car Seat, unstrap the

short clips from each belt slot and squeeze the release handle located at the foot-end

of the seat and carefully lift upward on the seat (Fig. 18).

NOTE: Raise the support tabs when the car seat is not in use.

Fig. 18

Fig. 17b

Fig. 17a

Fig. 17c

Fig. 17d

Short clips

TO FOLD STROLLER

WARNING: Care

must be taken when folding and unfolding the stroller to

prevent nger entrapment.

CAUTION:

Do not

allow children near stroller while folding.

19) • Close the canopy as described in the

canopy section (step 8). Place the seat in the furthest recline position (step 9).

• Fold the stroller by pulling both release

triggers (Fig. 19a). Press downward on

the stroller handle until the stroller is completely folded. Lock the release lever

on the right side of the stroller (Fig. 19b).

TO UNFOLD STROLLER

CAUTION: Do not

allow children near stroller while unfolding.

20) • Unlock the release lever (Fig. 20a) and

unfold stroller frame by pulling backward on the stroller handle until the frame

locks (Fig. 20b).

Fig. 19a

Fig. 19b

Fig. 20a

Fig. 20b

Baby Trend TJ30 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual