Baby Trend SS86 Instruction Manual

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

Lea todas las instrucciones ANTES de armar y USAR el producto.

CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.

Lire toutes les instructions AVANT l'assemblage et l'UTILISATION

du produit.

CONSERVER LES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

SS86

Sit N’ Stand® Snap Fit™ Double Stroller

Instruction Manual

Manual de Instrucciones

Manuel d’instructions

SS86_3L_110415

www.babytrend.com

Convenience through innovation and thoughtful design

1-800-328-7363 (8:00am ~ 4:30pm PST) www.babytrend.com

Baby Trend, Inc. 1607 S. Campus Ave., Ontario, CA 91761

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND

FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend

®

warranty covers workmanship defects within the rst 180 days of

purchase. Any product which has been subjected to misuse, abuse, abnormal use,

excessive wear and tear, improper assembly, negligence, environmental exposure, alteration

or accident, or has had its serial number altered or removed invalidates all claims against

the manufacturer. Any damage to property during installation is the sole responsibility of the end user. The Customer Service Department can be contacted at 1 (800) 328-7363 Monday through Friday between 8:00am and 4:30 pm (PST). Return Authorizations are required prior

to returning product(s) to Baby Trend

®

. Warranty only valid in North America.

GARANTIA

NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND

PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.

La garantía de Baby Trend

®

cubre defectos de fábrica dentro de los primeros 180 días de

la compra.Cualquier producto que haya sido sometido a uso indebido, abuso, uso anormal,

desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o

accidente, o que ha tenido su número de serie alterado o removido anula todos los reclamos

contra el fabricante. Cualquier daño a la propiedad durante la instalación es de la exclusiva

responsabilidad del usuario nal. El Departamento de Servicio al Cliente puede ser

contactado a 1 (800) 328-7363 Lunes a viernes entre 8:00 am y 4:30 pm (PST).Un numero

de autorizacion es requerido antes de la devolución de los producto(s) a Baby Trend®.

Garantia válida sólo en América del Norte.

GARANTIE

NE RETOURNEZ PAS VOTRE PRODUIT AU MAGASIN. VEUILLEZ COMMUNIQUER

AVEC BABY TREND POUR OBTENIR DES PIÈCES DE RECHANGE AINSI QUE POUR

LES QUESTIONS D'ENTRETIEN ET DE RÉPARATION.

La garantie Baby Trend® couvre les défauts de fabrication pour une durée de 180 jours

suivant la date d'achat. Tout produit ayant été soumis à un usage abusif ou excessif, à une

utilisation anormale, à une usure excessive, à un assemblage inadéquat, à de la négligence,

à une exposition environnementale, ainsi que tout produit ayant subi des modications ou des

accidents, ou dont le numéro de série a été modié ou supprimé, devient inadmissible à toute

revendication au titre de la garantie. Tout dommage matériel subi lors de l'installation relève

de la seule responsabilité de l'utilisateur nal. Vous pouvez communiquer avec le Service à

la clientèle en composant le 1 800 328-7363 du lundi au vendredi, de 8 h à 16 h 30 (heure

normale du Pacique). Une autorisation doit être obtenue avant de retourner tout produit à

Baby Trend

®

. Garantie valable uniquement en Amérique du Nord.

WARNING

2

1

Table of Contents Índice Table des Matières

English 2

Warning 2 Parts 3 Information 4 Assembly 5 Safety 8 Operation 10 Maintenance 13

Espanol 14

Piezas 14 Advertencia 15 Información 16 Montaje 17 Seguridad 20 Funcionamiento 22 Mantenimiento 25

Français 26

Pièces 26 Avertissement 27 Informations 28 Assemblage 29 Sécurité 32 Utilisation 34 Entretien 37

WARNING: Please follow all of these instructions

to ensure the safety of your child. Keep these instructions for future reference.

WARNING: Failure to follow these instructions

could result in serious injury or death. Avoid serious injury from falling or sliding out, always use the safety harness and ensure that the children are properly positioned according to these instructions.

WARNING: Never leave children unattended. WARNING: Care must be taken when folding and

unfolding the stroller to prevent nger entrapment.

• ONLY approved SNAP TECHTM products can be used on the frame.

• Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the stroller and cause a hazardous, unstable condition.

• The maximum weight that can be carried in the storage basket is 5 lbs (2.26 kg). Seat Belt storage pocket: To store seat belt only, maximum weight is 1 lb (0.45 kg). Excessive weight may cause a hazardous unstable condition to exist.

• Be certain the stroller is completely opened and locked in place before allowing a child near the stroller.

• The maximum weight for the Toddler seats are 40 lbs (18.14 kg) each. The maximum weight for the platform/jumpseat is 50 lbs (22.67 kg).

• The rear stand on platform / jump seat is designed for a child who is at least 2 1/2 years old and is not over 40 inches (101.6 cm) tall. Children totaling more than 90 pounds (40.82 kg), will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition to exist.

• NEVER use the stroller on stairways or escalators.

• NEVER allow your stroller to be used as a toy.

• To clean use only mild household soap or detergent and warm water on a sponge or clean cloth.

• Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.

• Discontinue use of stroller should it malfunction or become damaged. Please contact our customer service department to arrange for repair or obtain replacement parts.

4

INFORMATION

PARTS

3

Stroller

Seats (2)

Front Wheels

Bumper Bars (2)

Canopies (2)

Check that you have all the parts for this model

before assembling the stroller.

Rear Axle

RIDING POSITIONS

• ONLY approved SNAP TECHTM products can be

used on the frame.

5

6

ASSEMBLY ASSEMBLY

Remove stroller from box. The front and rear wheels MUST be installed prior to use.

FRONT WHEELS

To attach the front wheels, unfold stroller as described in the following section:

1) • Unlock the release lever (Fig. 1a) and

unfold stroller frame by pulling upward on the stroller handle until the frame locks (Fig. 1b).

• Lean the stroller backwards and push each front wheel assembly into the front wheel housing until they lock into place (Fig. 1c).

NOTE: Pull on the wheel assembly to ensure that it is securely attached to the stroller.

IMPORTANT! To ensure safe operation of your stroller, please

follow these instructions carefully. Please keep these instructions for future reference.

IMPORTANT! Before assembly and each use, inspect this product for

damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.

IMPORTANT! Adult assembly is required.

Fig. 1a

Fig. 1b

Fig. 1c

REAR WHEELS

2) • Position rear axle over the rear leg

tubes, brake pedals facing the back. At the same time, push down applying equal pressure to both sides until they lock into place (Fig. 2).

NOTE: Pull on the rear wheels to ensure that it is securely attached to the stroller.

BUMPER BAR

WARNING: Do not use

bumper bar to carry seat with child inside. The bumper bar is not a carrying handle.

3) • Attach the bumper bar by lining up

anchors with the slots on the seat. Push until it locks into place (Fig. 3a).

Note: The bumper bar must be securely attached before using this product.

• To detach bumper bar, press the release button on the bottom of the bar and pull bar out of the anchor. Swing the bar upwards to access the seat (Fig. 3b).

Fig. 2

Fig. 3b

Fig. 3a

8

SAFETY

7

ASSEMBLY

ATTATCHING THE SEAT

• ONLY approved SNAP TECHTM products can be

used on the frame.

4) • Attach the seat by lining up the seat

anchors on the side of the seat with the anchors on the stroller frame and pushing them together until they lock securely (Fig. 4). The seat can face in either direction, frontward or backward.

• To take off the seat or the infant car seat, push both release buttons on each side of the seat anchors and lift the seat upwards.

DO NOT remove with child in the seat.

TO ADJUST SEAT

5) • The seats can be adjusted into upright

and reclined positions. Pull the recline button on the rear of the seat and rotate the seat into the desired position (Fig. 5).

REMOVABLE CANOPY

6) • To attach the removable canopy: Line

up the posts on the canopy clips with the holes on the toddler seat tubes. Attach the canopy to the seat frame using the hook and loop fasteners (Fig. 6a).

• Push or pull on the front edge of the canopy while holding the rear of canopy in place to open and close (Fig. 6b).

Fig. 4

Fig. 5

BRAKES

WARNING:

Always set brakes when the stroller is not being pushed so that the stroller will not roll away. NEVER leave stroller unattended on a hill or incline as the stroller may slide down the hill.

7) • To engage brakes, apply downward

pressure to the brake levers located on the rear axle. The stroller might have to be required to be rolled back and forth to fully engage the brake (Fig. 7). Check that the stroller will not move once the brakes are properly applied. To release, gently lift up on the brake levers.

TO SECURE THE CHILD

WARNING: Avoid

serious injury from falling or sliding out. Always use the safety harness.

STRANGULATION

HAZARD: Child can

strangle in loose straps. Never leave child in seat when straps are loose or undone.

Fig. 6b

Fig. 6a

Fig. 7

10

OPERATION

9

SAFETY

8) • The shoulder straps of the 5-point

harness have 3 attachment positions. Select the position that places the shoulder strap level with, or below the top of the child’s shoulder (Fig. 8a). To adjust harness height unhook the shoulder strap from the crotch buckle. Feed the shoulder strap through the harness spread slots. You can access these slots from the rear of the seat underneath the fabric. Feed shoulder strap through the appropriate slot and reattach the shoulder strap to the crotch buckle.

• Carefully place the child in the stroller seat and bring the safety harness around the child’s waist and over the child’s shoulders. Place the crotch strap between the child’s legs. Insert the male end of each shoulder/waist belt into the buckle on the crotch strap. Tighten the harness so it is snug around the child’s waist and over the child’s shoulders (Fig. 8b).

TO RELEASE THE CHILD

9) • To release, push the button on center

clasp and the two harness buckles will pop free (Fig. 9).

SIT N' STAND

®

WARNING:

T

he rear platform and jump seat are designed to accommodate a child who is at least 2 1/2 years old, has good balance and coordination, and is not over 40 inches tall.

10) • Sitting: Always use the 3-point harness

while in the seated position facing the stroller handle. Put the seat belt around the child’s waist and buckle to the crotch strap (Fig. 10). Adjust the seat belt to be snug around the child’s waist.

• Standing: Your child can stand on

the riding platform facing forward or backwards.

NOTE: Use caution while standing on the platform. Make sure your child is always holding onto the frame while riding.

Fig. 8a

Fig. 8b

Adjust for a snug t

Fig. 9

Fig. 10

Center Clasp

Baby Trend SS86 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual