Baby Trend 8181bt User Manual

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

Model # 8181BT

Nursery Center & Playard

Instruction Manual

Convenience through Innovation and thoughtful design

03.04

Nursery Care Center & Playard LXI

Read all instructions BEFORE assembly and USE of Playard. Keep Instructions for future use.

WARNING: FAILURE TO FOLLOW THESE

03.04

WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH FROM ENTRAPMENT,
STRANGULATION, SUFFOCATION, ETC. INFANTS CAN
SUFFOCATE: IN GAPS BETWEEN AN EXTRA MATTRESS AND
SIDE OF PRODUCT, OR ON SOFT BEDDING. NEVER ADD A
MATTRESS, PILLOW, COMFORTER OR PADDING. USE ONLY
MATTRESS PROVIDED BY MANUFACTURER.

• IF REFINISHING, USE A NONTOXIC FINISH SPECIFIED FOR CHILDRENʼS PRODUCTS.

• DO NOT LEAVE CHILD IN PRODUCT WITH SIDE LOWERED.

• BE SURE SIDE IS IN RAISED AND LOCKED POSITION WHENEVER CHILD IS IN PRODUCT.

• The Playard, including side rails, must be fully erect prior to use. Make sure locks are secure.

• Discontinue use of the Playard when child is able to climb out or reaches the height of 35 inches (890 mm)
or the weight of 30 lbs.. (14 kg)

• When child is able to pull to a standing position, remove bumper pads, large toys, and other objects that
could serve as steps for climbing out.

• Never leave your child unattended.

• Strings can cause strangulation! DO NOT place items with a string around the childʼs neck, such as hood
strings or pacier cords. DO NOT suspend strings over a Playard/crib or attach strings to toys.

• DO NOT place the Playard near a window where cords from blinds or drapes can strangle a child. DO NOT
add padding or other objects inside the Playard that will permit your child to climb out. Keep Playard away
from stoves, heaters, campres and other hazards.

• Never use plastic shopping bags or other plastic lm as mattress covers not sold and intended for that
purpose. They can cause suffocation.

• Before each usage or assembly, inspect product for damaged hardware, loose joints, missing parts, or sharp
edges. DO NOT use Playard if any parts are missing or broken. Please contact Baby Trend Customer
Service for replacement parts, repair or instructional literature if needed. DO NOT substitute parts.

• DO NOT use a water mattress with this product.

• This product is not intended for commercial use.

MAINTENANCE AND CLEANING INSTRUCTIONS:

*Use only household soap or detergent and warm water. *NO BLEACH.

Please: If you experience any difculty with the use of our product or have a question regarding these
instructions, please contact our Customer Service Department at [phone] between the hours of
8:00 a.m. and 4:30 p.m. Pacic Standard Time. Please do not return the product to the store as once it is
returned it cannot be re-sold and the materials and energy used to make it are wasted.

To Contact Us:

Baby Trend, Inc. Customer Service Hot Line

1567 S. Campus Ave. [phone]
Ontario, CA 91761 8:00 a.m. to 4:30 p.m. Pacic Standard Time

2

FOR THE SAFETY OF YOUR CHILD, PLEASE READ THE INSTRUCTIONS COMPLETELY
BEFORE ASSEMBLING THE PLAYARD, BASSINET AND CHANGING AREA

TO ASSEMBLE PLAYARD

Before you begin: The Baby Trend Playard is designed so that, when
properly setup, the fabric of the playard places pressure on the 4 top rails
making them nearly impossible to unlock. This safety feature is activated
when you push down on the playard oor to lock the bottom rails. When
setting up the playard, if you allow the bottom rails to lock before locking
the top rails, the fabric pressure will not allow you to lock the top rails.
Please see (Fig. 3.) for the proper position of the bottom of the playard
when locking the top rails.

1. Unzip bag and remove Playard frame (Fig. 1). Undo the 3 Velcro
straps and set mattress aside (Fig. 2).

2. Stand Playard on legs keeping feet of playard close together as shown

in gure 3. Pull up on top rails until all rails “click” and “lock”.

* READ IMPORTANT: In order to continue, the handle in the

center of the oor of the Playard MUST remain raised in order
for the rail to lock (approx. 45.7 cm or 18 inches). The feet of the
playard should almost touch each other. All 4 bottom rails must
be pointed upward in order to LOCK top rails.

3. Push down on center of Playard oor until it is at and locks into
position (Fig. 4). The center lock mechanism will lock automatically.
The center lock will rotate clockwise about 90 degrees as it locks.

NOTE: Test rails to make sure they are locked. Push down on each
rail making sure they are rigid and in a set position.

Figure 1.

Figure 2.

Figure 3

WARNING: All top rails MUST be

straight and locked in position or child may
become entrapped and suffocate.

See gure 5 and 6.

4. Place mattress in Playard with padded side up (Fig. 7).

NOTE: DO NOT insert mattress if using bassinet feature. Go to
bassinet instructions.

5. Feed the 6 Velcro straps (found underneath the mattress), 3 on each

end of the mattress pad, through the slots on the bottom of the sides
of the Playard. Fasten the Velcro tabs to the underside of Playard to
prevent the mattress from moving (Fig. 8) (Fig. 9).

WARNING: To prevent child from

suffocating, Velcro straps MUST be secured
to underside of Playard.

6. Attach the organizer, to any side of the playard, by pushing the plastic

clips down over the top rail. (Fig. 10). The maximum weight capacity
of the organizer is 3 pounds.

Playard assembly is now complete and ready to use.

Figure 4

Figure 5

Figure 6

3